CARMATOR Universal Garage Door Opener Remote Control User Manual

Introduction

This manual provides comprehensive instructions for the CARMATOR Universal Garage Door Opener Remote Control. This remote is specifically designed for use with compatible garage door openers. Please read this manual thoroughly to ensure proper setup, operation, and maintenance.

Package Contents

Your CARMATOR Universal Garage Door Opener Remote Control package should include the following items:

• Remote Control
• Battery (typically pre-installed or included separately)
• Visor Clip
• User Manual (this document)

This image displays the remote control, a button-cell battery, a metal visor clip, and a small instruction sheet, representing the typical package contents.

Compatibility Requirements

This remote control is specifically designed for use with Sears Craftsman, LiftMaster, and Chamberlain garage door openers that meet the following criteria:

• Equipped with a GREEN Learn Button.
• Manufactured between 1993 and 1997.
• Operates on a 390MHz frequency.
• Utilizes "Billion Code" series technology.

IMPORTANT: Ensure your garage door opener has a GREEN learn button. This remote will not function with other learn button colors (e.g., red, orange, purple, yellow) or newer Security+ systems.

This diagram highlights the green learn button on the back of a garage door opener, confirming compatibility for units manufactured between 1992 and 1997 that operate at 390 MHz.

Compatible Model Numbers (Partial List):

The CARMATOR remote is compatible with many models, including but not limited to:

• 139.18803, 139.18805, 139.18814, 139.18815, 139.18830, 139.18850, 139.18851, 139.18855, 139.18859, 139.18860
• 139.53225, 139.53325, 139.53335, 139.53425, 139.53479, 139.53491, 139.53525, 139.53535
• 139.536141, 139.536151, 139.536181, 139.536191, 139.536251, 139.53626, 139.536261, 139.53627, 139.536271, 139.53628, 139.53629, 139.53635, 139.53636, 139.53637, 139.53638, 139.53640, 139.53641, 139.53644, 139.53645, 139.53646, 139.53647, 139.53648, 139.53650, 139.53660, 139.53669, 139.53678
• 139.53755, 139.53759, 139.53776, 139.53779, 139.53800, 139.53824, 139.53834

Setup and Programming Instructions

Follow these steps to program your CARMATOR remote control to your compatible garage door opener:

1. Locate the Learn Button: On your garage door opener motor unit, locate the GREEN Learn Button. This button is typically found on the back or side panel of the motor unit.
2. Press the Learn Button: Press and immediately release the GREEN Learn Button on your garage door opener. The learn indicator light on the opener will glow steadily for 30 seconds, indicating it is in programming mode.
3. Activate the Remote: Within 30 seconds of pressing the learn button on the opener, press and hold the desired button on your CARMATOR remote control.
4. Confirm Programming: Release the remote button when the garage door opener lights blink or two clicks are heard. This indicates successful programming.
5. Test the Remote: Press the programmed button on your remote to ensure it operates the garage door.

Note: If you have more than one compatible garage door opener, you can program the other buttons on the remote to additional openers by repeating these steps for each opener.

This diagram visually guides the user through the programming process: finding the learn button on the motor unit, pressing it, and then pressing the desired button on the remote.

Operating Your Remote Control

Once programmed, operating your CARMATOR remote control is straightforward:

• To open or close your garage door, simply press the programmed button on the remote control.
• The remote can operate up to three different garage doors if each is compatible and programmed to a separate button.

This image shows the CARMATOR remote control, which features three distinct buttons for operating garage doors and includes a visor clip for convenient storage.

Battery Installation and Replacement

The remote control uses a button-cell battery. A battery is typically included with your purchase.

1. To access the battery compartment, locate the small notch on the side or back of the remote casing.
2. Use a small coin or flat-head screwdriver to gently pry open the remote casing.
3. Carefully remove the old battery. Note its orientation (+/-).
4. Insert the new battery (e.g., CR2032) with the positive (+) side facing up.
5. Snap the remote casing back together securely.

WARNING: Keep batteries out of reach of children. If swallowed, seek immediate medical attention. Dispose of used batteries properly according to local regulations.

This image shows a small, round button-cell battery, which powers the remote control.

Troubleshooting

If you encounter issues with your remote control, refer to the following table for common problems and solutions:

Product Specifications

• Model Number: 139.53879 (81LM)
• Brand: CARMATOR
• Frequency: 390 MHz
• Compatibility: Garage door openers with GREEN Learn Button (1993-1997 models)
• Number of Buttons: 3
• Battery Type: Button Cell (Alkaline)
• Item Weight: 1.44 ounces
• Package Dimensions: 3.27 x 2.83 x 1.06 inches

Important Safety Information

Please observe the following safety guidelines to prevent injury or property damage:

• Always keep remote controls out of reach of children.
• Never allow children to operate or play with the garage door remote control.
• Keep the moving door in sight and away from people and objects until it is completely closed.
• Do not operate the remote control if the garage door is obstructed or if anyone is in the path of the door.
• Dispose of batteries according to local environmental regulations.

Warranty and Customer Support

For warranty information or technical assistance regarding your CARMATOR Universal Garage Door Opener Remote Control, please refer to the contact information provided by your retailer or visit the CARMATOR official website for support resources.