VEVOR Pottery Wheel User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your VEVOR Pottery Wheel. Please read it thoroughly before initial use and retain it for future reference. The VEVOR Pottery Wheel is a 28cm forming machine with a detachable basin and foot pedal control, powered by a 350W motor, designed for art craft, DIY clay work, and home use.

2. Safety Instructions

Always observe the following safety precautions to prevent injury or damage to the machine:

• Ensure the machine is placed on a stable, level surface.
• Keep hands and loose clothing away from the rotating wheel during operation.
• Do not operate the machine with wet hands or in wet conditions to avoid electrical shock.
• Always unplug the machine before cleaning or performing maintenance.
• The machine features a single-phase three-wire connection with an earth leakage protection device for enhanced safety. Do not bypass or modify this feature.
• Supervise children when they are near or using the pottery wheel.

3. Product Components

Familiarize yourself with the main parts of your VEVOR Pottery Wheel:

• Main Unit: Houses the motor and control panel.
• 11" / 28 cm Aluminum Alloy Turntable: The rotating surface for clay.
• Detachable ABS Water Basin: Collects excess mud and water, designed for easy cleaning.
• Foot Pedal: Controls the speed of the turntable.
• Control Panel: Includes power switch, forward/reverse switch, and leakage protection device.
• Reinforced Pads: Located at the bottom for stability and floor protection.

Figure 3.1: VEVOR Pottery Wheel and included accessories.

Figure 3.2: Key dimensions of the VEVOR Pottery Wheel.

4. Setup

1. Unpacking: Carefully remove all components from the packaging. Inspect for any damage during transit.
2. Placement: Place the pottery wheel on a stable, flat, and dry surface. The reinforced pads at the bottom ensure stability and protect your floor.
3. Basin Installation: Ensure the detachable ABS water basin is correctly seated around the turntable. It is designed to prevent mud from eroding the fuselage.
4. Foot Pedal Connection: Connect the foot pedal to the designated port on the main unit.
5. Power Connection: Plug the power cord into a standard 110V/220V outlet. Ensure the earth leakage protection device is functioning correctly before use.

5. Operating Instructions

The VEVOR Pottery Wheel offers flexible control for various pottery techniques.

1. Power On: Turn on the main power switch on the control panel. The indicator light should illuminate.
2. Direction Selection: Use the FOR/OFF/REV switch to select the desired rotation direction (Forward or Reverse).
3. Speed Control: Press the foot pedal to start the turntable rotation. The speed can be smoothly adjusted from 0-300 r/min by varying the pressure on the foot pedal.
4. Working with Clay: Place your clay on the center of the 11-inch aluminum alloy turntable. Use the foot pedal to control the speed as you shape your pottery.
5. Low Noise Operation: The 350W efficient motor operates with low noise, typically less than 60dB, providing a comfortable working environment.
6. Shaping Tools: Utilize the included 16-piece carving tool set for refining your designs. Wear the waterproof apron to protect your clothing from clay.

Figure 5.1: Foot pedal for precise speed control and direction switch.

Figure 5.2: Additional shaping kit for detailed work.

6. Maintenance

Regular cleaning and maintenance will prolong the life of your pottery wheel.

• Cleaning the Basin: The detachable ABS water basin can be easily removed for thorough cleaning after each use. This prevents mud buildup and ensures hygiene.
• Turntable Cleaning: Wipe down the aluminum alloy turntable with a damp cloth to remove any clay residue.
• General Cleaning: Keep the main unit and control panel clean and dry. Avoid using abrasive cleaners or solvents.
• Storage: Store the pottery wheel in a dry, dust-free environment when not in use.

Figure 6.1: The removable basin simplifies cleanup.

7. Troubleshooting

8. Specifications

• Brand: VEVOR
• Model: VEVOR Pottery Wheel (11in/350W-Foot Pedal Control)
• Product Dimensions: 20.5 x 13.8 x 13.8 inches
• Item Weight: 29.3 pounds
• Turntable Diameter: 11 inches / 28 cm
• Motor Power: 350W
• Speed Control: Foot Pedal (0-300 r/min)
• Noise Level: Less than 60dB
• Electrical Connection: Single-phase three-wire with earth leakage protection
• First Available: December 14, 2021

9. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official VEVOR website. VEVOR is committed to providing attentive support to its customers.

You can also find additional resources and contact information on the VEVOR Store Page.