Bandai Spirits RG 1/144 God Gundam Model Kit Instruction Manual

1. Introduction

This manual provides detailed instructions for assembling and understanding your Bandai Spirits Real Grade (RG) 1/144 God Gundam model kit. The RG series is known for its advanced articulation and intricate detail, designed to replicate the human body's movement for dynamic posing.

The God Gundam model kit features advanced MS joints in the shoulders and wrists, enabling a wide range of motion, including the characteristic 'arms crossed' pose. It also includes a movable axis on the thumb cover and nail base for reproducing the God Finger attack. An original sun effect is provided to enhance display options.

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

2. Setup and Assembly

Assembly of this model kit does not require glue. A hobby nipper is necessary to carefully remove parts from their runners. The plastic parts are pre-colored, minimizing the need for paint to achieve the intended appearance.

2.1 Included Components

• God Slash x 2
• Hand parts x 1 set
• Sun wheel effect connection joint x 1
• PET sheet (sun effect) x 1
• Realistic decal x 1

2.2 Assembly Steps

Refer to the detailed graphical instructions provided in the box for step-by-step assembly. Begin by carefully identifying all runners and parts. Use a hobby nipper to cleanly detach each piece, avoiding stress marks or damage. Follow the numerical sequence for optimal construction.

Image: Various parts of the God Gundam model kit still attached to their plastic runners.

Image: A close-up of hands carefully fitting together two model kit components during assembly.

3. Operating and Posing

Once assembled, your God Gundam model offers extensive articulation for dynamic posing. The advanced joint system allows for a wide range of movement in the limbs and torso.

3.1 Articulation and Posing

• Shoulder and Wrist Joints: Utilize the advanced MS joints to achieve expressive arm poses, including the iconic 'arms crossed' stance.
• God Finger: The thumb cover and nail base feature movable axes, allowing for the recreation of the God Finger attack.
• Leg and Torso Movement: The model's design allows for deep bends and twists, enabling various action poses.

Image: The fully assembled God Gundam model kit standing in a ready pose, showcasing its detailed design and articulation.

3.2 Accessories

The kit includes several accessories to enhance display and posing:

• God Slash: Two beam sabers that can be held in the model's hands.
• Sun Effect: A PET sheet designed to create a 'sun wheel' effect, attaching to the model's back to simulate energy emission.

Image: The God Gundam model kit wielding two translucent pink beam sabers, known as God Slash, in an action pose.

Image: The God Gundam model kit posed with the translucent rainbow-colored sun effect attached to its back, simulating an energy aura.

4. Maintenance

To ensure the longevity and appearance of your God Gundam model kit, follow these maintenance guidelines:

• Cleaning: Dust regularly with a soft, dry brush or a microfiber cloth. Avoid using harsh chemicals or abrasive materials.
• Handling: Handle the model by its main body parts rather than delicate accessories or thin protrusions to prevent breakage.
• Storage: Store the model away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation and discoloration.
• Joint Care: If joints become loose over time, a thin layer of clear topcoat or clear nail polish can be applied to the ball joint or peg, allowed to dry, and then reassembled to tighten the connection.

5. Troubleshooting

This section addresses common issues you might encounter with your model kit.

• Loose Parts: Some smaller parts, especially accessories or decorative elements, may become loose. If a part consistently falls off, a small amount of plastic cement or super glue can be used to secure it, but be cautious as this is a permanent modification.
• Stiff Joints: If a joint feels too stiff, gently work it back and forth to loosen it. Avoid forcing movement, as this can cause breakage. Applying a tiny amount of silicone grease (specifically for plastics) can also help.
• Decal Application Issues: If decals are not adhering properly, ensure the surface is clean and dry. Using decal setting solutions can help them conform better to curved surfaces and improve adhesion.

6. Specifications

7. Warranty and Support

For product support and warranty information, please ensure your product was purchased from an authorized U.S. Retailer. Products shipped from within North America by authorized U.S. Retailers will have a Bandai Namco warning label on the product box. This label serves as proof of an officially licensed Bandai Spirits product and entitles the purchaser to product support assistance within the United States.

This product has been thoroughly tested for safety and meets all North American consumer product safety regulations.