isekurity HM49
User Manual
isekurity Car Key Camera (Model: HM49)
1080P Portable Security DVR Cam with IR Night Vision & Motion Detection
1. Introduction
Thank you for choosing the isekurity Car Key Camera. This compact and discreet device is designed for portable security and surveillance, offering 1080P video recording with infrared night vision and motion detection capabilities. Its unique car key shape allows for versatile placement in various indoor and outdoor environments. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
Please read this manual thoroughly before using the product and retain it for future reference.
2. Product Overview
2.1 Package Contents
- isekurity Car Key Camera (Model: HM49)
- Charging Cable
- Instruction Manual
2.2 Device Components
Familiarize yourself with the key components of your car key camera:
Figure 1: Car Key Camera Components
- Night Vision Lamp: Infrared LEDs for low-light recording.
- Camera: 1080P HD lens for video and photo capture.
- Status Indicator: LED light indicating device status (power, recording, etc.).
- Mobile Detection / Night Vision ON/OFF Button: Activates motion detection and toggles night vision.
- Photo and Video Key: Button for initiating photo capture or video recording.
- ON/OFF: Power button for the device.
- USB: USB port for charging and data transfer.
- TF Card: Slot for Micro SD card (up to 128GB, not included).
- RESET: Button to reset the device to factory settings.
2.3 Key Features
- Full HD 1080P Video: Records clear video at 1920x1080 resolution (30FPS).
- IR Night Vision: Enables recording in low-light conditions without emitting visible light.
- Motion Detection: Automatically records when motion is detected, saving relevant video to the SD card.
- Portable & Discreet Design: Shaped like a car key for inconspicuous use.
- Long Battery Life: Built-in rechargeable battery provides approximately 90 minutes of continuous video recording.
- Expandable Storage: Supports Micro SD cards up to 128GB (card not included).
- No Wi-Fi Required: Operates independently without network connection.
- No Audio Recording: Please note that this device does not record audio.
3. Setup
3.1 Charging the Device
Before first use, fully charge the car key camera. Connect the provided charging cable to the USB port on the device and plug the other end into a USB power adapter (not included) or a computer's USB port. The status indicator light will show charging status (refer to Section 4.1 for LED indications).
3.2 Inserting the Micro SD Card
The device requires a Micro SD card (TF card) for storing recordings. Ensure the card is formatted to FAT32 for optimal compatibility. Insert the Micro SD card into the TF card slot with the gold contacts facing down until it clicks into place. To remove, gently push the card in until it springs out.
Note: A Micro SD card is not included with the product and must be purchased separately. The device supports up to 128GB capacity.
4. Operating Instructions
4.1 LED Indicator Status
The status indicator light provides important feedback on the device's current mode:
- Solid Red: Device is powered on and in standby mode.
- Flashing Red: Recording in progress.
- Solid Blue: Motion detection standby.
- Flashing Blue: Motion detection recording.
- Solid Green: Charging (light turns off when fully charged).
4.2 Powering On/Off
- To Power On: Press and hold the ON/OFF button for 2-3 seconds. The red indicator light will illuminate, indicating standby mode.
- To Power Off: Press and hold the ON/OFF button for 2-3 seconds. The indicator lights will turn off.
4.3 Video Recording
- From standby mode (solid red light), press the Photo and Video Key once to start video recording. The red light will flash.
- To stop recording, press the Photo and Video Key again. The device will save the video file and return to standby mode (solid red light).
4.4 Photo Capture
- From standby mode (solid red light), press the Mobile Detection / Night Vision ON/OFF Button once to switch to photo mode. The indicator light may change (refer to specific model behavior if different from general LED status).
- Press the Photo and Video Key once to take a photo. The light will flash briefly.
- To return to video standby, press the Mobile Detection / Night Vision ON/OFF Button again.
4.5 Motion Detection Recording
- From standby mode (solid red light), press and hold the Mobile Detection / Night Vision ON/OFF Button for 2-3 seconds to activate motion detection. The indicator light will turn solid blue.
- When motion is detected, the blue light will flash, and the device will automatically begin recording. Recording will stop and save the file when motion ceases.
- To exit motion detection mode, press and hold the Mobile Detection / Night Vision ON/OFF Button again for 2-3 seconds. The device will return to standby mode (solid red light).
4.6 Night Vision Activation
- Night vision is typically activated automatically in low-light conditions when recording. Some models may have a dedicated toggle or integrate it with the motion detection button. Refer to the specific button functions in Section 2.2.
- The night vision lamps are designed to be invisible during operation.
Figure 2: Discreet Placement Example
4.7 Viewing Recordings
To view recorded videos and photos, connect the car key camera to your computer using the provided USB cable. The device will appear as a removable disk. You can then access the files stored on the Micro SD card. Alternatively, you can remove the Micro SD card and insert it into a card reader connected to your computer.
Figure 3: Two Ways to Read Data
5. Maintenance
- Keep the device dry. Avoid exposure to water or high humidity.
- Clean the lens gently with a soft, lint-free cloth to ensure clear recordings.
- Avoid extreme temperatures. Do not expose the device to direct sunlight or very cold environments.
- Regularly back up important recordings from the Micro SD card to prevent data loss.
- Format the Micro SD card periodically (e.g., monthly) to maintain optimal performance and prevent fragmentation.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery; device frozen. | Charge the device fully. Press the RESET button with a thin object (e.g., paperclip). |
| Cannot record video/take photos. | No Micro SD card; card full; card error. | Insert a Micro SD card. Delete old files or replace the card. Format the card. |
| Poor video quality. | Dirty lens; insufficient lighting. | Clean the camera lens. Ensure adequate lighting or activate night vision. |
| No audio in recordings. | This model does not support audio recording. | This is a feature of the product. No solution required. |
| Motion detection not working. | Motion detection not activated; insufficient motion. | Ensure motion detection mode is active (solid blue light). Test in an area with clear motion. |
If the problem persists after trying the above solutions, please contact customer support.
7. Specifications
- Model: HM49
- Video Resolution: 1920 x 1080P (Full HD)
- Frame Rate: 30 frames per second
- Video Format: AVI (VID)
- Image Sensor: Upgraded image sensor
- Viewing Angle: 140 degrees
- Storage: Micro SD Card, up to 128GB (not included)
- Battery: Built-in rechargeable Lithium Ion battery (approx. 90 min recording)
- Charging Voltage: DC-5V
- Connectivity: Wired (USB for data transfer)
- Features: IR Night Vision, Motion Detection
- Indoor/Outdoor Usage: Indoor, Outdoor
- Dimensions: Approximately 4.72 x 3.74 x 1.65 inches (Package)
- Weight: Approximately 4.2 ounces
8. Warranty and Support
For any questions, issues, or technical assistance, please contact our professional tech support team. We are committed to solving any problems you may encounter via email, phone, WhatsApp, Facebook, or other available channels.
Please refer to your purchase documentation for specific warranty details and contact information.