1. Introduction
Thank you for choosing the MIDDOW Counter Height Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new table. Please read it thoroughly before assembly and retain it for future reference.
This counter height table is designed to offer a versatile surface for dining, working, or other activities, featuring a rustic wood finish and a sturdy construction.
2. Safety Information
WARNING: Failure to follow these safety instructions may result in injury or damage to the product.
- Always secure the table to the floor to prevent tipping, especially if used in areas with children or pets.
- Do not overload the table. The maximum weight capacity is 120 lbs (54.4 kg). Exceeding this limit can compromise stability and cause damage.
- Keep all assembly hardware out of reach of children.
- Ensure all screws and fasteners are tightened securely before use. Periodically check and re-tighten as necessary.
- Do not stand or sit on the table.
- Avoid placing hot items directly on the table surface without protective mats.
- Use the table on a flat, stable surface to prevent wobbling.
3. Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tabletop (1)
- Table Legs (4)
- Support Beams (2)
- Hardware Pack (screws, washers, Allen wrench)
- Instruction Manual (1)
Image 3.1: Illustration of key table components and features, including the tabletop, thickened legs, and footpads.
4. Assembly Instructions
Assembly typically requires a screwdriver (not included) and the provided Allen wrench. It is recommended to assemble the table with two people.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Refer to the parts list to ensure all items are present.
- Attach Support Beams to Legs: Connect the two support beams between the table legs using the provided screws. Ensure the T-shaped structure is stable. Do not fully tighten screws at this stage.
- Attach Legs to Tabletop: Carefully align the assembled leg structures with the pre-drilled holes on the underside of the tabletop. Secure them using the appropriate screws.
- Tighten All Fasteners: Once all components are loosely assembled, gradually tighten all screws and bolts. Ensure the table is level and stable. Do not overtighten.
- Place Footpads: Verify that the non-slip footpads are securely attached to the bottom of each leg to protect your floor.
Image 4.1: Table dimensions for reference during assembly and placement.
Image 4.2: The assembled table in a typical use environment, demonstrating its sturdy construction.
5. Operating Instructions
The MIDDOW Counter Height Table is designed for versatile use in various indoor settings.
- Placement: Position the table on a level surface. Its counter height is suitable for use with higher bar stools or as a standing workstation.
- Multifunctional Use: This table can serve as a dining table, kitchen island, home office desk, writing desk, or computer desk.
- Cable Management: The tabletop features a 0.2-inch cut-out path, allowing USB cables to pass through for convenient charging of phones or computers when used as a desk.
- Seating: The table can comfortably accommodate 2-6 individuals, depending on the size of chairs or stools used.
Image 5.1: The table configured as a home office desk, demonstrating its adaptability.
6. Maintenance
Proper care will extend the life and appearance of your table.
- Cleaning: Wipe the table surface with a damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the wood finish.
- Spills: Clean up spills immediately to prevent staining or water damage.
- Inspection: Periodically check all fasteners and re-tighten them if they become loose.
- Protection: Use coasters and placemats to protect the surface from heat, moisture, and scratches.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Uneven floor; Loose fasteners; Incorrect assembly. | Ensure the table is on a level surface. Check and tighten all screws. Review assembly steps. |
| Surface finish peeling | Wear and tear; Exposure to moisture or heat; Manufacturing defect. | Avoid excessive moisture and heat. Use protective mats. For significant defects, contact customer support. |
| Missing parts or hardware | Packaging error. | Contact customer support with your purchase details and a list of missing items. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | MIDDOW |
| Model | Counter Height Table |
| Product Dimensions (L x W x H) | 55" x 25.5" x 35.5" (139.7 cm x 64.77 cm x 90.17 cm) |
| Weight Capacity | 120 lbs (54.4 kg) |
| Net Weight | 79 lbs (35.8 kg) |
| Main Material | MDF, Particle Board (Engineered Wood) |
| Color | Natural Wood Finish |
| Seating Capacity | Up to 6 people |
| Care Instructions | Wipe with Damp Cloth |
| Special Features | Hollow design, 0.2" cable pass-through, Footpads |
9. Warranty and Support
This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Specific warranty terms and duration may vary. Please retain your proof of purchase for warranty claims.
For technical assistance, missing parts, or warranty inquiries, please contact your retailer or the manufacturer directly. Provide your product model number and purchase date when contacting support.
Manufacturer: MIDDOW
Note: Protection plans may be available for purchase separately from your retailer.