Introduction
Thank you for choosing the CHI Handheld Garment Steamer. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new appliance. Please read all instructions carefully before first use and retain for future reference.
Important Safety Instructions
- Always unplug the steamer when filling or emptying the water tank, and when not in use.
- Do not immerse the steamer in water or other liquids.
- Use only distilled or demineralized water to prevent mineral buildup and extend the life of your steamer.
- Keep the steamer away from children and pets.
- Never direct steam at people, animals, or electrical appliances. Steam is hot and can cause burns.
- Allow the steamer to cool completely before storing.
- Do not operate the steamer with a damaged cord or plug. If the appliance malfunctions or has been damaged, contact customer support.
Product Overview
The CHI Handheld Garment Steamer is designed for efficient wrinkle removal with its powerful steam output and user-friendly features. It includes a detachable water tank, two continuous steam modes, and a fabric brush attachment.
Figure 1: Overview of the steamer's components and features, including the titanium-infused ceramic soleplate, steam controls, and water tank.
Setup
- Fill Water Tank: Detach the 300 ml water tank by twisting it from the base. Fill it with distilled or demineralized water. Do not overfill. Securely reattach the tank to the steamer.
- Attach Fabric Brush (Optional): For thicker fabrics or to remove lint, attach the fabric brush accessory to the steamer head.
- Power On: Plug the steamer into a 120V electrical outlet. The indicator light will illuminate, signaling that the steamer is heating up.
- Ready for Use: The steamer will be ready to produce steam in approximately 30 seconds.
Figure 2: The large 300 ml water tank is easily detachable for refilling. Ensure the tank is securely reattached before use.
Figure 3: The steamer heats up rapidly, indicated by the light, making it ready for use in approximately 30 seconds.
Operating Instructions
- Select Steam Mode: The steamer offers two continuous steam modes: Normal for most fabrics and Max for tougher wrinkles. Press the 'MAX' button to switch between modes.
- Activate Steam: Press and hold the steam trigger to release steam. For continuous steam without holding the trigger, push the steam lock switch down.
- Steaming Technique: Hold the steamer upright for vertical steaming of hanging garments or drapes. For horizontal steaming of upholstery or bedding, tilt the steamer facedown. Move the steamer slowly over the fabric, allowing the steam to relax the fibers and remove wrinkles.
- Video Demonstration: For a visual guide on operating your steamer, please watch the official product video below.
Figure 4: The steamer features two steam modes and a detachable fabric brush for versatile use on various fabrics.
Figure 5: Designed for comfort and spill-free operation, the steamer can be used both vertically for hanging clothes and horizontally for flat surfaces.
Figure 6: The 10-foot power cord provides extended reach, allowing for convenient steaming of drapes and other hard-to-reach items.
Video 1: This video provides a visual demonstration of the CHI Handheld Garment Steamer in action, showcasing its ease of use and effective wrinkle removal.
Maintenance
- Empty Water Tank: After each use, unplug the steamer and allow it to cool. Detach the water tank and empty any remaining water.
- Cleaning: Wipe the exterior of the steamer with a soft, damp cloth. Do not use abrasive cleaners.
- Descaling: To prevent mineral buildup, periodically descale the steamer by filling the tank with a mixture of 50% white vinegar and 50% water. Run the steamer until half the solution is used, then unplug and let it sit for 30 minutes. Empty the tank, rinse thoroughly, and run with fresh water to clear any vinegar residue.
- Storage: Store the steamer in a cool, dry place. Ensure the power cord is neatly wrapped and secured.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No steam or low steam output | Water tank empty; Mineral buildup; Steamer not fully heated. | Refill water tank; Perform descaling procedure; Allow 30 seconds for heating. |
| Water leaking from steamer head | Overfilled water tank; Steamer not fully heated; Mineral buildup. | Do not overfill; Allow full heat-up time; Perform descaling procedure. |
| Steamer not turning on | Not plugged in; Power outlet issue; Damaged cord/plug. | Ensure securely plugged in; Test with another outlet; Contact customer support if damaged. |
Specifications
- Model: 11590
- Power: 1600 Watts
- Voltage: 120 Volts
- Heat-up Time: Approximately 30 seconds
- Water Tank Capacity: 300 Milliliters
- Cord Length: 10 feet
- Dimensions (L x W x H): 5.31" x 3.78" x 10.67"
- Weight: 1.71 Pounds
Figure 7: Product dimensions for the CHI Handheld Garment Steamer.
Warranty & Support
This CHI Handheld Garment Steamer (Model 11590) is backed by a 2-year limited warranty. For warranty claims, technical support, or any questions not covered in this manual, please refer to the contact information provided with your purchase or visit the official CHI product support website.
