1. Introduction
This manual provides essential information for the safe assembly, use, and maintenance of your Delta Children Logan Wood Toddler Bed. Designed for children transitioning from a crib, this bed offers a secure and comfortable sleeping environment. It features a modern design with rounded spindles and angled feet, and is Greenguard Gold Certified for healthier indoor air quality.
Please read all instructions carefully before assembly and retain this manual for future reference.
Figure 1: Assembled Logan Wood Toddler Bed.
2. Safety Information
Your child's safety is our top priority. This toddler bed is designed and tested to meet or exceed all safety standards set by the CPSC & ASTM, and is JPMA certified. It is also Greenguard Gold Certified, ensuring low chemical emissions for a healthier home environment.
- Intended Use: This bed is intended for children who can get in and out of bed on their own. Always supervise young children around the bed.
- Weight Limit: The maximum weight recommendation for this toddler bed is 50 pounds.
- Guardrails: The bed features two attached guardrails to help keep your child safe and prevent falls.
- Low Height Design: The low-to-the-ground design provides easy access for your child, minimizing the risk of injury from falls.
- Non-Toxic Materials: Constructed with sustainable woods like New Zealand Pine, Poplar, and TSCA compliant engineered wood, and finished with a non-toxic, lead and phthalate-safe multi-step painting process.
Figure 2: Side view illustrating the attached guardrails for safety.
Figure 3: Greenguard Gold Certification ensures low chemical emissions.
3. Parts List
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
- Headboard
- Footboard
- Side Rails (with natural spindles)
- Bed Slats
- Support Legs
- Hardware Pack (screws, bolts, washers, Allen wrench)
Note: A full size crib mattress is required and sold separately.
Figure 4: Components of the Logan Wood Toddler Bed.
4. Assembly Instructions
Assembly of the Logan Wood Toddler Bed is designed to be straightforward. Please follow the step-by-step instructions provided in the included assembly guide. It is recommended to assemble the bed with two adults.
- Unpack all components and verify against the parts list.
- Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure.
- Install the bed slats evenly across the frame.
- Attach the support legs to the underside of the bed frame.
- Place a full size crib mattress (not included) onto the bed slats.
- Periodically check all bolts and screws to ensure they remain tight.
Figure 5: Bed frame with slats ready for mattress placement.
Video 1: Official overview of the Delta Children Logan Wood Toddler Bed, demonstrating features and design. This video provides a visual guide to the product's construction and appearance.
5. Operating Instructions (Usage)
Once assembled, the Logan Wood Toddler Bed is ready for use. Place a standard full size crib mattress (51 5/8" L x 27 1/4" W and 4"-6" thick) onto the bed slats. Ensure the mattress fits snugly within the frame to prevent gaps.
- Ensure your child can safely enter and exit the bed independently.
- Always use a mattress that meets the recommended dimensions to ensure safety.
- Do not allow children to jump on the bed, as this can cause damage or injury.
- Keep the area around the bed clear of hazards.
Figure 6: Child using the Logan Wood Toddler Bed.
6. Maintenance and Care
Proper care will extend the life and appearance of your toddler bed.
- Cleaning: Wipe the bed frame with a damp cloth and dry immediately. Avoid using abrasive cleaners or strong chemicals, as these can damage the finish.
- Inspections: Regularly check all hardware (screws, bolts) to ensure they are tight. Loose hardware can compromise the bed's stability and safety.
- Storage: If disassembling for storage, keep all hardware in a sealed bag and store in a dry place.
Figure 7: Maintaining a clean environment for the toddler bed.
7. Troubleshooting
If you encounter any issues with your Delta Children Logan Wood Toddler Bed, please refer to the following general advice:
- Squeaking or Instability: Check all assembly hardware. Tighten any loose screws or bolts. Ensure the bed is on a flat, level surface.
- Parts Not Fitting: Double-check the assembly steps and ensure you are using the correct parts for each step. Do not force components together.
- Chemical Odor: While the bed is Greenguard Gold Certified and uses non-toxic finishes, a faint odor may be present initially. This should dissipate quickly in a well-ventilated room.
For persistent issues or concerns not addressed here, please contact Delta Children customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | W103240-1372 |
| Brand | Delta Children |
| Color | Midnight Grey/Natural |
| Material Type | Engineered Wood, Pine Wood, Wood |
| Item Dimensions (L x W x H) | 53.75" x 29" x 24" |
| Item Weight | 29.1 Pounds |
| Maximum Weight Recommendation | 50 Pounds |
| Compatible Mattress Size | Full size crib mattress (sold separately) |
| Certifications | GREENGUARD Gold Certified, JPMA Certified |
| Included Components | Guardrails (other bed components included for assembly) |
| Assembly Required | Yes |
Figure 8: Front view of the Logan Wood Toddler Bed.
9. Warranty and Support
Delta Children provides a manufacturer's warranty for this product. Please refer to the details below:
- Manufacturer Warranty: 90 days.
For warranty claims, missing parts, or any product-related inquiries, please contact Delta Children customer support directly. Contact information can typically be found on the product packaging or on the official Delta Children website.