1. Product Overview
The Jolux LED Stick Light Bulbs are designed to provide efficient and long-lasting illumination. These bulbs are a 60W incandescent equivalent, consuming only 8.5 watts, and emit 800 lumens of 3000K warm white light. Featuring a medium screw base (E26), they are suitable for a variety of fixtures, including enclosed and damp-rated environments. These bulbs are non-dimmable.
Image 1.1: Jolux LED Stick Light Bulb showing its compact dimensions (1.42" x 4.45").
Image 1.2: Product certifications (ETL, RoHS, FC) and the E26 screw base for easy installation.
2. Key Features
- Energy Saving: Replaces 60W incandescent bulbs with only 8.5W LED consumption, providing 800 lumens of light.
- Warm White Light: Emits a comfortable 3000K warm white light.
- Slim Design: Cylindrical shape (1.42 inches in diameter) is ideal for narrow or enclosed fixtures where standard A19 bulbs may not fit.
- Enclosed Fixture Rated: Approved for use in totally enclosed recessed fixtures and damp locations. Do not use where directly exposed to water.
- Non-Dimmable: These bulbs are designed for on/off operation only and are not compatible with dimmer switches.
- Long Lifespan: Rated for over 11,000 hours of operation, based on 3 hours of daily use.
- Eye Comfort: Designed to be flicker-free and glare-free for visual comfort.
Image 2.1: Illustration highlighting the flicker-free and glare-free design for eye comfort.
3. Setup and Installation
These LED stick light bulbs are designed for simple installation into standard E26 medium screw base sockets.
- Power Off: Before installation, ensure the power to the light fixture is turned off at the circuit breaker to prevent electrical shock.
- Remove Old Bulb: Carefully unscrew the existing light bulb from the fixture. Allow it to cool if it has been recently in use.
- Install New Bulb: Gently screw the Jolux LED Stick Light Bulb into the E26 socket until it is finger-tight. Do not overtighten.
- Power On: Restore power to the fixture at the circuit breaker.
- Test: Turn on the light switch to confirm the bulb is functioning correctly.
Safety Precaution:
- Always turn off power before installing or replacing bulbs.
- Do not use with dimmer switches as these bulbs are non-dimmable.
- Suitable for damp locations, but not for direct exposure to water.
Video 3.1: An instructional video demonstrating the unboxing and installation of the Jolux LED Stick Light Bulb into a table lamp. The video shows the bulb being screwed into a standard E26 socket and then illuminated.
4. Operating Instructions
The Jolux LED Stick Light Bulbs operate as standard light bulbs. Once installed, simply use the wall switch or fixture switch to turn the light on or off.
- These bulbs provide instant full brightness upon activation.
- As these bulbs are non-dimmable, they should not be connected to dimmer switches. Using them with a dimmer may cause flickering, damage to the bulb, or premature failure.
Image 4.1: Examples of wide application for the LED stick bulbs in various home and office environments.
5. Maintenance
Jolux LED Stick Light Bulbs require minimal maintenance due to their long lifespan and durable construction.
- Cleaning: Ensure the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: When the bulb reaches the end of its operational life, replace it following the installation steps in Section 3.
- Storage: If storing bulbs, keep them in their original packaging in a cool, dry place.
6. Troubleshooting
If you encounter issues with your Jolux LED Stick Light Bulb, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up | No power to the fixture Bulb not screwed in properly Faulty bulb | Check circuit breaker and wall switch Ensure bulb is securely tightened (power off first) Test bulb in another working fixture; if still not working, replace bulb |
| Bulb flickers | Used with a dimmer switch Loose connection | Remove from dimmer circuit; these bulbs are non-dimmable Ensure bulb is securely tightened (power off first) |
| Light is too dim | Incorrect bulb wattage for desired brightness Voltage fluctuation | Verify the bulb's lumen output meets your needs Consult an electrician if voltage issues are suspected |
7. Specifications
| Specification | Value |
|---|---|
| Brand | Jolux |
| Model Number | T60827N26U6P |
| Light Type | LED |
| Wattage | 8.5 Watts |
| Incandescent Equivalent Wattage | 60 Watts |
| Brightness | 800 Lumens |
| Light Color | Warm White |
| Color Temperature | 3000 Kelvin |
| Bulb Base | E26 Medium Screw Base |
| Voltage | 120 Volts |
| Beam Angle | 200 Degrees |
| Color Rendering Index (CRI) | 80.00 |
| Special Feature | Non-Dimmable, Energy Efficient |
| Indoor/Outdoor Usage | Indoor (Damp Location Approved) |
| Light Source Operating Life | 11,000 Hours |
| Material Type | Plastic |
| Certifications | ETL, FCC |
| Item Dimensions (W x H) | 1.42"W x 4.45"H |
8. Warranty and Support
Jolux provides a 2-year quality warranty for these LED stick bulbs. If you experience any quality issues or are not satisfied with your purchase, please contact Jolux customer support for assistance.
For more information or support, please visit the official Jolux store on Amazon: Jolux Store
