Kesnos PDGT701BC

Kesnos 180 Pints Commercial Dehumidifier with Pump and Drain Hose

User Manual

Brand: Kesnos | Model: PDGT701BC

Product Overview

The Kesnos 180 Pints Commercial Dehumidifier is designed for efficient moisture removal in large spaces. It can extract up to 180 pints of moisture per day under specific conditions (95°F, 90%RH), making it suitable for areas up to 7,000 Sq. Ft. This unit is ideal for basements, laundry rooms, cellars, warehouses, garages, workshops, and other commercial and industrial environments. It features intelligent humidity control, a built-in pump for continuous drainage, and a durable, portable design.

Kesnos 180 Pints Commercial Dehumidifier

Figure 1: Front view of the Kesnos 180 Pints Commercial Dehumidifier, showcasing its compact and robust design.

Setup and Installation

Before operating your Kesnos dehumidifier, please follow these setup instructions carefully to ensure optimal performance and safety.

1. Unpacking and Placement

  • Carefully remove the dehumidifier from its packaging.
  • Place the unit on a stable, level surface in the desired location. Ensure there is at least 8 inches of space around all sides of the unit for proper airflow.
  • Consider the dimensions of the unit for placement: 21.26 inches (Depth) x 19.69 inches (Width) x 32.68 inches (Height).
Kesnos Dehumidifier with dimensions

Figure 2: The dehumidifier with its key dimensions highlighted, aiding in proper placement.

2. Drainage Setup

The Kesnos dehumidifier features a built-in pump and includes a 10 ft drainage hose for continuous water removal.

  • Locate the drainage port on the unit.
  • Connect one end of the provided 10 ft drain hose to the drainage port. Ensure a secure connection to prevent leaks.
  • Direct the other end of the hose to a suitable drain location. The built-in pump can discharge water up to 15 feet in height, allowing for flexible drainage options into a sink, floor drain, or other receptacle.
  • Alternatively, the unit has a removable water tank (0.26 Gallons capacity) for manual emptying if continuous drainage is not desired.
Dehumidifier showing built-in pump and drain hose connection

Figure 3: Close-up view illustrating the built-in pump and the connection point for the drainage hose, enabling continuous operation.

3. Power Connection

  • Plug the power cord into a grounded electrical outlet. Ensure the voltage matches the unit's requirements.

Operating Instructions

The Kesnos dehumidifier features an intelligent control panel for easy operation.

Dehumidifier control panel

Figure 4: The intelligent control panel of the dehumidifier, showing various indicators and control buttons.

1. Power On/Off

  • Press the POWER button to turn the unit on or off.

2. Setting Desired Humidity Level

  • The built-in humidity sensor allows the unit to smartly sense and maintain room humidity.
  • Use the UP and DOWN arrow buttons to adjust the desired humidity level, which can be set from 10%RH to 98%RH. The unit will operate until the set humidity level is reached.

3. Timer Function

  • Press the TIMER button to set a 24-hour timer for automatic on/off operation.

4. Automatic Defrosting

  • The unit is equipped with an automatic defrosting function to prevent ice buildup on the coils, ensuring efficient operation in cooler environments. The DEFROST indicator will illuminate when this function is active.

5. Pump Operation

  • If the drain hose is connected and continuous drainage is enabled, the PUMP indicator will show when the pump is actively draining water.

Video 1: An official product video demonstrating the features and operation of the Kesnos Commercial Dehumidifier, including its internal components, humidity control, and drainage system.

Maintenance

Regular maintenance ensures the longevity and efficiency of your dehumidifier.

1. Cleaning the Air Filter

The air filter should be cleaned regularly to maintain optimal performance. A dirty filter can reduce dehumidification efficiency and increase energy consumption.

  • Turn off the dehumidifier and unplug it from the power outlet.
  • Locate and remove the air filter from the unit. The filter is detachable and washable for reuse.
  • Clean the filter using a vacuum cleaner to remove loose dust, or wash it with warm, soapy water. Rinse thoroughly.
  • Allow the filter to air dry completely before reinserting it into the dehumidifier. Do not use a dryer or direct heat.
Dehumidifier with filter removed for cleaning

Figure 5: The dehumidifier with its high-density air filter removed, illustrating the ease of access for cleaning and maintenance.

2. General Cleaning

  • Wipe the exterior of the unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Ensure the air intake and exhaust grilles are free from obstructions.

Troubleshooting

If your Kesnos dehumidifier is not operating as expected, please review the following common issues before contacting support.

Unit Does Not Turn On

  • Check if the power cord is securely plugged into a working electrical outlet.
  • Ensure the power button on the control panel has been pressed.
  • Verify that the circuit breaker has not tripped.

Dehumidifier Not Removing Moisture

  • Check if the air filter is clean and not obstructed. A dirty filter can restrict airflow.
  • Ensure the humidity setting is lower than the current room humidity.
  • Verify that the room temperature is within the operating range for the dehumidifier.
  • Confirm that windows and doors in the area are closed to prevent outside humidity from entering.

Water Tank Full or Pump Not Draining

  • If using the water tank, ensure it is correctly seated and not full. Empty the tank if necessary.
  • If using continuous drainage, check that the drain hose is not kinked, blocked, or elevated too high beyond the pump's capacity (15 ft).

Specifications

Detailed technical specifications for the Kesnos 180 Pints Commercial Dehumidifier.

SpecificationValue
BrandKesnos
Model NumberPDGT701BC
Product Dimensions (D x W x H)21.26" x 19.69" x 32.68"
Item Weight90.39 Pounds
Capacity (Pints/Day)180 Pints (under 95°F, 90%RH)
Floor Area CoverageUp to 7000 Square Feet
Tank Volume0.26 Gallons
Special FeatureBuilt-In Pump
Number of Speeds3
Recommended UsesCommercial
ColorGray
First Available DateNovember 16, 2021

Warranty and Support

Kesnos is committed to providing excellent customer service and product support.

Warranty Information

  • 30-Day Money-Back Guarantee: If you are not satisfied with your purchase, you may be eligible for a full refund within 30 days.
  • 1-Year Warranty: The dehumidifier is covered by a 1-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.
  • 2nd-Year Extended Warranty: An additional 1-year extended warranty is available, providing coverage for a total of two years.

Customer Support

For any questions, concerns, or technical assistance, please do not hesitate to contact the Kesnos customer support team. They are available to provide professional and high-quality services and aim to reply within 24 hours.

For more detailed information, you can also refer to the official User Manual PDF: Download User Manual (PDF)

© 2023 Kesnos. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.