Vaxson Film Protector for UQ mobile ZTE BLADE V770 Back Camera Lens

1. Product Overview

The Vaxson Film Protector is designed to safeguard the back camera lens of your UQ mobile ZTE BLADE V770 device. Made from a unique, military-grade flexible plastic, this film offers robust protection against scratches, scuffs, and daily wear while maintaining optical clarity.

Key features include:

• Ultra-Definition Material: Ensures the picture quality remains clear, as if taken by the original camera.
• 4H Hardness: Provides firm protection against scratches and scuffs.
• Self-Healing Technology: Minor scratches on the film can recover within 48 hours.
• Anti-Fingerprint Coating: Reduces smudges and fingerprints for a cleaner lens.
• Bubble-Free Installation: Designed for easy, smooth application without air bubbles.
• Dust-Resistant: Helps prevent dust accumulation under the film.
• No Sticky Residue: Leaves no residue upon removal.

2. Package Contents

Please verify that all items are present in your package:

• Vaxson Camera Lens Film Protector (2-Pack)
• Micro Fiber Cloth
• Dry Wipe

3. Installation Guide

Follow these steps carefully for optimal installation of your Vaxson Film Protector:

1. Prepare Your Workspace: Choose a clean, dust-free environment. Wash your hands thoroughly to avoid transferring oils or dirt to the film or lens.
2. Clean the Camera Lens: Use the provided dry wipe to remove any dust or debris from the camera lens surface. Follow with the micro fiber cloth to polish the lens, ensuring it is completely clean and dry.
3. Align the Protector: Carefully peel off the protective layer (usually marked '1' or 'back') from the film protector. Hold the protector by its edges and align it precisely over your phone's back camera lens. Ensure all cutouts match the lens and flash openings.
4. Apply the Protector: Once aligned, gently lower the protector onto the lens. Start from one edge and slowly press down, allowing the film to adhere.
5. Remove Bubbles: If any small bubbles appear, use the micro fiber cloth to gently push them towards the edges of the film. Most small bubbles will disappear naturally within 24-48 hours due to the self-healing properties.
6. Final Polish: Once the protector is fully adhered, gently wipe the surface with the micro fiber cloth to remove any remaining smudges.

4. Operating and Usage

Once installed, the Vaxson Film Protector operates passively, providing continuous protection to your camera lens without affecting its functionality. The ultra-definition material ensures that photo and video quality remains uncompromised. The anti-fingerprint coating helps keep your lens clear for optimal performance.

5. Maintenance

To maintain the clarity and effectiveness of your Vaxson Film Protector:

• Cleaning: Use the provided micro fiber cloth to gently wipe the lens protector. For stubborn smudges, slightly dampen the cloth with water or a screen cleaner designed for electronics. Avoid harsh chemicals or abrasive materials.
• Self-Healing: The film's self-healing technology will address minor scratches over time. Avoid intentionally scratching the film.
• Replacement: If the film becomes heavily damaged or its clarity is significantly reduced, replace it with a new one from the 2-pack.

6. Troubleshooting

Here are solutions to common issues you might encounter:

• Bubbles After Installation: Small bubbles often disappear within 24-48 hours due to the film's self-healing properties. For larger bubbles, gently lift the nearest edge of the protector and reapply, pushing the bubble out with the micro fiber cloth. Ensure the lens is free of dust before reapplication.
• Dust Under the Protector: If dust particles are trapped, carefully lift the protector from the nearest edge using a piece of tape to dab the dust off both the lens and the adhesive side of the protector. Reapply as per installation steps.
• Film Not Sticking Properly: Ensure the lens surface was thoroughly cleaned and dry before application. Extreme temperatures can affect adhesion; apply in a room-temperature environment.
• Reduced Camera Clarity: Verify that the film is clean and free of smudges. If clarity issues persist, ensure the film is correctly aligned and not obstructing any part of the lens or flash.

7. Specifications

8. Warranty and Support

For any questions, concerns, or support regarding your Vaxson Film Protector, please refer to the retailer's return policy or contact Vaxson customer service through the platform where the product was purchased. Specific warranty details may vary by region and retailer.