Tekky Toys TT59096G 7 ft. Ghost Witch Animated Prop Instruction Manual

1. Introduction

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Tekky Toys TT59096G 7 ft. Ghost Witch Animated Prop. Please read this manual thoroughly before use and retain it for future reference.

The TT59096G is designed as an animated Halloween decoration, featuring a 7-foot tall ghost witch figure holding a pumpkin, intended for indoor or covered outdoor use.

2. Safety Information

• Fire Hazard: Keep the animated prop away from open flames, heat sources, and flammable materials.
• Electrical Safety:
  • Use only the provided 6-volt power adapter.
  • Do not expose the prop or power adapter to water or extreme moisture.
  • Ensure all electrical connections are secure before operation.
  • Unplug the prop from the power source when not in use or during maintenance.
• Stability: Ensure the prop is placed on a stable, level surface to prevent tipping. Secure it if necessary, especially in outdoor environments.
• Children and Pets: This is a decorative item and not a toy. Keep out of reach of small children and pets to prevent entanglement or damage.
• Indoor/Covered Outdoor Use: This prop is designed for indoor use or covered outdoor areas where it is protected from direct rain and harsh weather conditions.

3. Package Contents

Verify that all components are present and undamaged before assembly.

• 1 x 7 ft. Ghost Witch Animated Prop (disassembled)
• 1 x Base Stand Components
• 1 x 6V DC Power Adapter
• 1 x Instruction Manual (this document)

4. Setup

Follow these steps to assemble your animated prop:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, flat surface.
2. Assemble Base Stand: Connect the base stand components according to the diagrams (if provided in physical manual). Ensure the base is stable and secure.
3. Attach Support Poles: Insert the main support poles into the assembled base. Ensure they are firmly locked into place. The poles may be segmented and require connection.
4. Mount Prop Body: Carefully slide the main body of the Ghost Witch prop onto the support poles. Align any internal connectors or slots.
5. Connect Limbs/Head: Attach any separate limbs or the head component if they are not pre-attached. Ensure all connections are secure.
6. Drape Fabric: Arrange the fabric costume of the prop to achieve the desired appearance.
7. Position Prop: Place the assembled prop in its desired location, ensuring it is on a stable surface and away from high traffic areas where it might be bumped.
8. Connect Power: Plug the 6V DC power adapter into the designated port on the prop (usually located at the base or back). Then, plug the adapter into a standard electrical outlet.

Image 1: The fully assembled Tekky Toys TT59096G 7 ft. Ghost Witch Animated Prop. The prop features a green-faced witch with glowing eyes, wearing a black pointed hat and tattered black robes, holding a carved pumpkin with a menacing expression.

5. Operating Instructions

Once assembled and powered, the TT59096G prop is ready for operation.

• Power On: Ensure the power adapter is securely plugged into both the prop and the wall outlet. The prop may have an on/off switch, typically located near the power input. Set it to the "ON" position.
• Activation: The prop is typically activated by a motion sensor or a push-button.
  • Motion Sensor: If equipped, the prop will activate when motion is detected within its sensor range. Ensure the sensor is not obstructed.
  • Push Button: Some models include a step-pad or push-button for manual activation.
• Animation Sequence: Upon activation, the prop will perform its programmed animation sequence, which may include movement, sound, and light effects (e.g., glowing eyes, pumpkin light).
• Power Off: To turn off the prop, set the on/off switch to the "OFF" position and unplug the power adapter from the wall outlet.

6. Maintenance

• Cleaning:
  • Dust the prop regularly with a soft, dry cloth.
  • For stubborn dirt, lightly dampen a cloth with water and mild soap, then wipe gently. Avoid getting moisture into electronic components.
  • Do not use abrasive cleaners or solvents.
• Storage:
  • Before storing, ensure the prop is clean and completely dry.
  • Disassemble the prop in reverse order of assembly, if desired, for compact storage.
  • Store in its original packaging or a protective container in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Avoid placing heavy objects on top of the prop during storage.
• Inspections: Periodically inspect the power cord, adapter, and all connections for any signs of damage or wear. Discontinue use if damage is found.

7. Troubleshooting

8. Specifications

• Model: TT59096G
• Brand: Tekky Toys
• Height: 7 ft. (approximately 213 cm)
• Material: Metal, Plastic, Fabric
• Power Input: 6 Volts DC (via included adapter)
• Item Weight: 1 pound (approximately 0.45 kg)
• Recommended Use: Halloween decoration (Indoor / Covered Outdoor)
• UPC: 669703590968

9. Warranty and Support

Tekky Toys products are manufactured with quality and care. For specific warranty information, please refer to the documentation included with your purchase or visit the official Tekky Toys website. If you encounter any issues or require technical assistance, please contact Tekky Toys customer support directly.

Please retain your proof of purchase for warranty claims.