Introduction
This manual provides instructions for the general replacement remote control designed for various Samsung AC Air Conditioners. This remote offers essential functions to operate your air conditioning unit effectively. Please read this manual carefully before use.
Compatibility
This replacement remote control is compatible with the following Samsung AC Air Conditioner models:
- RG57B1/BGE
- RG57A6/BGEF
- AR24TXHQASINEU
- AR24TXHQBWKNEU
- RG57A7/BGEF
- AR09TXHQBWKNEU
- AR12TXHQASINEU
- AR12TXHQBWKNEU
This remote is designed to function without complex pairing for the listed models.
Getting Started
Battery Installation
The remote control requires two AAA batteries (not included). Follow these steps to install them:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards to open the compartment.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) ends align with the markings inside the compartment.
- Slide the cover back into place until it clicks securely.
Note: Remove batteries if the remote will not be used for an extended period to prevent leakage.
Remote Control Overview
Image: Front view of the replacement remote control. The remote is white with a grey LCD screen at the top. Below the screen are various circular and oval-shaped buttons. Key buttons visible include ON/OFF (orange), MODE, FAN, TEMP (up/down arrows), ECO, TIMER ON, TIMER OFF, SLEEP, SWING DIRECT, TURBO, SELF CLEAN, LED, and MY TEMP. The LCD screen displays "AUTO", "SET TEMP", "24°C", "FAN", and "AUTO".
Button Functions
| Button | Function |
|---|---|
| ON/OFF | Turns the air conditioner unit on or off. |
| MODE | Cycles through operating modes: Auto, Cool, Dry, Fan, Heat (if supported by AC). |
| FAN | Adjusts the fan speed (Auto, Low, Medium, High). |
| TEMP (▲/▼) | Increases or decreases the set temperature. Displays in Celsius only. |
| ECO | Activates energy-saving mode for reduced power consumption. |
| TIMER ON | Sets a timer for the air conditioner to automatically turn on. |
| TIMER OFF | Sets a timer for the air conditioner to automatically turn off. |
| SLEEP | Activates sleep mode, which adjusts temperature and fan speed for comfortable sleep. |
| SWING DIRECT | Controls the vertical swing of the air conditioner's louvers or adjusts the louver direction. |
| TURBO | Initiates rapid cooling or heating to reach the desired temperature quickly. |
| SELF CLEAN | Activates the self-cleaning function of the indoor unit (if supported by your AC model). |
| LED | Turns the display light on or off on the air conditioner unit. |
| MY TEMP | Allows you to save and recall your preferred temperature and mode settings. |
Operating Instructions
Basic Operation
- Turning On/Off: Press the ON/OFF button to power the AC unit on or off.
- Adjusting Temperature: Use the TEMP ▲ button to increase the temperature and TEMP ▼ button to decrease it. The display shows temperature in Celsius only.
- Changing Mode: Press the MODE button repeatedly to cycle through available operating modes (e.g., Auto, Cool, Dry, Fan, Heat).
- Adjusting Fan Speed: Press the FAN button repeatedly to select desired fan speed (e.g., Auto, Low, Medium, High).
Advanced Functions
- ECO Mode: Press ECO to activate an energy-efficient operation mode.
- Setting Timers: Use TIMER ON and TIMER OFF buttons to program automatic power-on or power-off times. Refer to your AC unit's original manual for specific timer setting procedures if needed.
- Sleep Mode: Press SLEEP to engage a quiet and comfortable sleep operation.
- Airflow Control: Press SWING DIRECT to adjust the direction of the airflow or activate the automatic swing function.
- Turbo Function: Press TURBO for a quick boost in cooling or heating performance.
- Self Clean: If your AC unit supports it, press SELF CLEAN to initiate the internal cleaning cycle.
- LED Display: Press LED to toggle the display light on your AC unit.
- My Temp: Use MY TEMP to store and recall your preferred settings for quick access.
Important Notes
- This remote control displays temperature in Celsius only. It does not support Fahrenheit.
- Batteries are not included with this remote control.
- Due to manufacturing and handling processes, the remote control may exhibit minor cosmetic scratches. This does not affect its functionality.
- This remote is a replacement and may not include a separate instruction manual in its packaging. This document serves as the user guide.
Troubleshooting
- Remote not responding:
- Ensure batteries are inserted correctly with correct polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote and the AC unit's receiver.
- Confirm the remote is pointed directly at the AC unit.
- Display on remote is dim or blank:
- Replace batteries. Low battery power can cause a dim display.
- AC unit not performing a specific function (e.g., Self Clean, My Temp):
- Verify that your specific Samsung AC model supports that function. Not all features are universal across all compatible models.
- Consult your original AC unit's user manual for details on its specific features.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 6a79e61f-14da-409a-b637-ecbcad0713de |
| Brand | SymWell |
| Compatible Devices | Samsung AC Air Conditioners (specific models listed in Compatibility section) |
| Connectivity Technology | Infrared |
| Power Source | 2 x AAA Batteries (not included) |
| Temperature Display | Celsius only |
| Item Weight | 0.16 ounces (approx. 4.5 grams) |
| Package Dimensions | 2.36 x 1.18 x 0.39 inches |
Warranty and Support
For any issues or inquiries regarding this replacement remote control, please contact the seller or retailer from whom you purchased the product. Please retain your proof of purchase for warranty claims, if applicable.