Westinghouse Humidifier and Air Purifier Combo Instruction Manual

1. Introduction and Overview

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Westinghouse Humidifier and Air Purifier combo. This appliance is designed to regulate humidity levels, improve indoor air quality through sterilization, and can be used with essential oils for added comfort.

Image: The Westinghouse Humidifier and Air Purifier Combo, showcasing its transparent water tank and digital display.

Key Features:

• Smart Humidity Control: Automatically regulates humidity levels for optimal comfort.
• Improved Indoor Air Quality: Alleviates skin and breathing problems caused by dry air and disinfects air using patented electrolytic sterilization.
• Essential Oil Diffuser: Integrated diffuser for use with essential oils.
• Digital Controls & Remote: LED display, digital soft-touch control panel, and included remote control for ease of use.
• Long Run Time: Up to 43 hours of continuous operation on low speed.

2. Setup Instructions

Follow these steps to set up your Westinghouse Humidifier and Air Purifier for first-time use.

1. Unpack the Unit: Carefully remove the humidifier from its packaging. Remove all plastic wrapping and protective materials.


Image: Step 1 - Lift off and remove the mist nozzle, water tank cover, and mist condenser stopper.

2. Install Ceramic Filter: Remove the foam package containing the ceramic filter and mist condenser. Insert the ceramic filter into its designated slot.


Image: Step 2 - Insert the mist condenser into the mist tube, ensuring the 'UP' mark is facing upwards.

3. Fill Water Tank: Remove the water tank cover. Fill the water tank with approximately 4L of tap water. Do not fill beyond the MAX mark. Only use tap water; do not use distilled water or sanitizer.

Image: Step 3 - Pour tap water into the water tank, ensuring not to exceed the maximum fill line.
4. Replace Cover: Reassemble the mist condenser stopper, water tank cover, and mist nozzle.


Image: Step 4 - Securely place the water tank cover back onto the unit.

5. Plug In: Plug the humidifier into a suitable power outlet. The display will flash and then enter standby mode.


Image: Step 5 - Connect the power cord to an electrical outlet.

3. Operating Instructions

Your Westinghouse Humidifier and Air Purifier offers various settings for personalized comfort and air quality control.

• Power On/Off: Press the power button on the control panel or remote to turn the unit on or off.
• Mist Volume Adjustment: Use the mist button on the control panel or remote to cycle through different mist output levels (e.g., low, medium, high).

Image: The humidifier functioning as an aroma and essential oil diffuser, with essential oil bottles nearby.
• Smart Humidity Control: Activate the smart humidity mode to allow the unit to automatically adjust mist output to maintain a healthy humidity level based on its built-in sensor.


Image: A hand holding the remote control for the humidifier, demonstrating hands-free digital controls.

• Timer Function: Set a timer for automatic shut-off using the timer button. Available settings typically range from 1 to 8 hours.
• Sleep Mode: Engage sleep mode to dim the LED display, ensuring no bright lights disturb your rest.
• Essential Oil Diffuser: Add a few drops of your preferred essential oil to the designated essential oil tray. The mist will carry the aroma throughout your space.

4. Maintenance

Regular cleaning and maintenance are crucial for the longevity and optimal performance of your humidifier.

Image: A visual guide showing four steps for easy cleaning: removing cover and mist condenser, lifting out mist tube and ceramic ball filter, cleaning the water tank surface, and rinsing with a vinegar solution.

1. Remove Cover: Lift off and remove the mist nozzle, water tank cover, and mist condenser stopper.


Image: Step 1 - Remove the mist nozzle and then take off the water tank cover.

2. Remove Mist Tube: Lift out the mist tube and slide the mist condenser out of the mist tube.

Image: Step 2 - Lift out the mist tube and slide the mist condenser out of the mist tube.
3. Scrub Tank: Clean the surface of the tank with a soft brush (included). Make sure to remove any scale or mineral deposits.


Image: Step 3 - Clean the surface of the tank with a soft brush to remove scale.

4. Rinse and Dry: Rinse all items thoroughly and wipe any deposits and excess water from the parts. Dry thoroughly before reassembly. For deeper cleaning, agitate a mixture of 1 part vinegar and 3 parts water in the tank, then rinse and dry.


Image: Step 4 - Rinse the items thoroughly and wipe any deposits and excess water from the parts and dry thoroughly.

5. Troubleshooting

If you encounter any issues with your Westinghouse Humidifier and Air Purifier, please refer to the following common troubleshooting tips:

• No Mist Output:
  • Ensure the water tank is filled to the appropriate level.
  • Check that all components (mist tube, ceramic filter, covers) are correctly assembled.
  • Verify the unit is properly plugged into a working power outlet.
• Unusual Odor:
  • Clean the water tank and all removable parts thoroughly as per the maintenance instructions.
  • Replace the water regularly to prevent stagnant water.
• Excessive Noise:
  • Ensure the unit is placed on a flat, stable surface.
  • Check for any obstructions in the mist outlet or water tank.
• Humidity Level Not Changing:
  • Ensure the smart humidity control is activated and set to your desired level.
  • Verify the room size is within the recommended coverage area for the humidifier.

If these steps do not resolve the issue, please contact customer support for further assistance.

6. Specifications

7. Warranty Information

Your Westinghouse Humidifier and Air Purifier is covered by a 1-Year Limited Warranty.

The warranty guarantees that the manufacturer will repair or replace any covered defects for a period of one year from the original date of purchase. Please retain your proof of purchase for warranty claims.

8. Customer Support

For further assistance, product inquiries, or warranty claims, please contact Westinghouse customer support:

• Website: Visit the official Westinghouse website for support resources and FAQs.
• Email: Refer to your product packaging or the Westinghouse website for specific contact email addresses.
• Phone: Refer to your product packaging or the Westinghouse website for customer service phone numbers.

Please have your model number (WSHUJLR2258GY) and proof of purchase ready when contacting support.