HOOBRO End Table with Charging Station BG541BZ01 Instruction Manual

1. Important Safety Information

Please read and understand all instructions before assembly and use. Keep this manual for future reference.

• Position the product away from direct heat sources, direct sunlight, and excessive moisture.
• Avoid contact with sharp, pointed objects and corrosive chemicals to prevent damage.
• Do not allow children to climb on the product to prevent injury.
• Ensure all connections for the charging station are secure before use.

Image 1.1: Overview of the HOOBRO End Table with Charging Station.

2. Package Contents

Verify that all components and hardware are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

2.1 Components

• Tabletop Panel
• Side Panels (with drawer slides)
• Back Panel
• Drawer Fronts
• Drawer Side/Back Panels
• Bottom Panels for Drawers
• Metal Frame Legs
• Charging Station Unit (pre-assembled)

2.2 Hardware

• Screws (various sizes)
• Drawer Knobs
• Adjustable Feet
• Allen Wrench (if applicable)
• Screwdriver (recommended, not always included)

3. Assembly Instructions

Assembly typically requires one person and a screwdriver. Follow the numbered steps carefully. Do not overtighten screws to avoid damaging the material.

Step 1: Attach Metal Frames to Side Panels

Secure the metal frame legs to the designated side panels using the provided screws. Ensure the holes align correctly.

Image 3.1: Illustration of attaching the metal frame to a side panel.

Step 2: Assemble Drawer Boxes

Connect the drawer side and back panels to the drawer front panels. Slide the drawer bottom panel into the grooves. Repeat for both drawers.

Image 3.2: Diagram showing the assembly of a drawer box.

Step 3: Install Drawers into Frame

Carefully slide the assembled drawers into the designated slots within the table frame. Ensure they move smoothly.

Image 3.3: Visual guide for installing the drawers.

Step 4: Attach Tabletop and Back Panel

Place the tabletop onto the assembled frame and secure it with screws. Attach the back panel to complete the main structure.

Image 3.4: Securing the tabletop and back panel.

Step 5: Install Drawer Knobs and Adjustable Feet

Attach the drawer knobs to the drawer fronts. Screw the adjustable feet into the bottom of the metal legs. Adjust the feet to ensure the table is stable and level on uneven surfaces.

Image 3.5: Final touches: knobs and adjustable feet installation.

4. Operating Instructions

4.1 Using the Charging Station

The integrated charging station features two 3-prong AC outlets, one USB-A port, and one USB-C port. The power cord is 4.9 feet long.

1. Plug the table's power cord into a standard wall outlet.
2. Connect your devices to the available AC outlets, USB-A, or USB-C ports.
3. Ensure devices are properly seated in the ports for charging.

Image 4.1: Detail of the integrated charging station.

4.2 Utilizing Storage Drawers

The two sliding drawers provide enclosed storage for small items, helping to keep your space organized and clutter-free.

• Gently pull the drawer knobs to open the drawers.
• Push the drawers back in until they are fully closed.

Image 4.2: Demonstrating the use of the sliding drawers.

4.3 Cable Management

The design of the table helps manage cables, reducing clutter around the charging area.

• Route charging cables through the designated openings or along the back of the table to maintain a tidy appearance.

Image 4.3: Example of cable management with the end table.

5. Care and Maintenance

Proper care will extend the life and appearance of your HOOBRO End Table.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Spills: Immediately wipe up any spills to prevent moisture damage to the engineered wood.
• Environmental Conditions: Keep the table in a stable indoor environment. Extreme temperature changes or humidity can affect the material.
• Weight Capacity: Do not exceed the maximum weight recommendation of 44 pounds (20 kg) for the tabletop.

6. Troubleshooting

6.1 Wobbly Table

• Check Adjustable Feet: Ensure all four adjustable feet are in contact with the floor and adjusted to compensate for uneven surfaces.
• Tighten Screws: Re-check all assembly screws and tighten them securely, but do not overtighten.

6.2 Drawers Do Not Slide Smoothly

• Re-align: Ensure the drawers are correctly seated on their slides.
• Obstructions: Check for any objects obstructing the drawer's path.

6.3 Charging Station Not Working

• Power Connection: Verify that the table's power cord is securely plugged into a functional wall outlet.
• Device Connection: Ensure your device's charging cable is properly connected to both the device and the charging port on the table.
• Overload: Avoid plugging in too many high-power devices simultaneously, which could trip a circuit.

6.4 Missing or Damaged Parts

• If you discover any missing or damaged parts upon opening the package, please contact HOOBRO customer support immediately for assistance.

7. Product Specifications

Image 7.1: Product dimensions overview.

8. Warranty Information

For specific warranty details regarding your HOOBRO End Table with Charging Station, please refer to the documentation included with your purchase or visit the official HOOBRO website. Warranty terms typically cover manufacturing defects and material flaws for a specified period from the date of purchase.

9. Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact HOOBRO customer support.

• Online Support: Visit the official HOOBRO store for FAQs and contact options: HOOBRO Store
• Email: Refer to your product packaging for direct email support.