Introduction
Thank you for choosing the Fresh 'n Rebel Twins 1 True Wireless Earbuds. These earbuds are designed to provide a seamless and cable-free audio experience with intuitive controls and extended playtime. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new earbuds.
Image: Fresh 'n Rebel Twins 1 True Wireless Earbuds in Ice Grey, showcasing their sleek design.
What's in the Box
Ensure all the following items are present in your product package:
- Fresh 'n Rebel Twins 1 True Wireless Earbuds (Left and Right)
- Charging Case
- USB to USB-C Charging Cable
Image: The Fresh 'n Rebel Twins 1 True Wireless Earbuds, charging case, and USB-C charging cable, as included in the box.
Setup
1. Initial Charging
Before first use, fully charge your Twins 1 earbuds and charging case. Place the earbuds into the charging case and connect the USB-C cable to the case and a power source. The earbuds fully charge in the case in approximately 1.5 hours.
Image: The Twins 1 earbuds seated in their open charging case, with LED indicators visible, signifying charging status.
2. Pairing with Your Device
- Ensure the earbuds are charged.
- Open the charging case. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), go to Bluetooth settings.
- Select "Fresh 'n Rebel Twins 1" from the list of available devices.
- Once connected, you will hear an audible confirmation.
The earbuds will automatically connect to your device when removed from the charging case after the initial pairing.
Image: A person's hands interacting with the Twins 1 charging case, demonstrating the automatic connection feature when earbuds are taken out.
Operating Instructions
Power On/Off
- Power On: Remove the earbuds from the charging case. They will power on automatically.
- Power Off: Place the earbuds back into the charging case. They will power off automatically.
Touch Controls
The Twins 1 earbuds feature touch controls on the side of each earbud for convenient operation.
| Action | Left Earbud | Right Earbud |
|---|---|---|
| Play/Pause | Double tap | Double tap |
| Next Track | Triple tap | Triple tap |
| Previous Track | Hold for 2 seconds | Hold for 2 seconds |
| Answer/End Call | Double tap | Double tap |
| Reject Call | Hold for 2 seconds | Hold for 2 seconds |
| Activate Voice Assistant | Triple tap | Triple tap |
Image: A visual representation of the touch control functions on the earbud, including taps for playback and calls.
Voice Assistant
Activate your device's voice assistant (e.g., Siri, Google Assistant) by triple-tapping either earbud. This allows for hands-free commands and queries.
Image: A person wearing a Twins 1 earbud, with speech bubbles and voice assistant logos indicating the activation of a voice assistant.
Dual Master Functionality
Both earbuds are equipped with built-in microphones, allowing them to function independently. You can use either the left or right earbud on its own for calls or music, or use both as a pair.
Image: Two Twins 1 earbuds depicted with arrows indicating they can be used separately or together, illustrating the Dual Master feature.
Maintenance
Cleaning
- Wipe the earbuds and charging case with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, solvents, or aerosol sprays.
- Keep charging contacts clean and free of debris.
Storage
- Always store the earbuds in their charging case when not in use to protect them and keep them charged.
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
Battery Care
- Avoid fully discharging the battery frequently.
- Charge the earbuds regularly, even if not used for extended periods, to maintain battery health.
Troubleshooting
Earbuds not pairing or connecting
- Ensure both earbuds are charged.
- Make sure Bluetooth is enabled on your device.
- Place the earbuds back in the case, close it, wait a few seconds, then open it again to re-enter pairing mode.
- Forget the device from your phone's Bluetooth settings and try pairing again.
- Ensure the earbuds are within the Bluetooth range of your device.
No sound or low volume
- Check the volume level on both your device and the earbuds.
- Ensure the earbuds are properly seated in your ears.
- Clean any debris from the earbud speakers.
- Reconnect the earbuds to your device.
Charging issues
- Ensure the charging cable is securely connected to both the case and the power source.
- Check if the charging contacts on the earbuds and inside the case are clean.
- Try a different USB-C cable or power adapter.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 3TW1 |
| Brand | Fresh 'n Rebel |
| Playtime (Earbuds) | Up to 4 hours |
| Total Playtime (with Case) | Up to 24 hours |
| Charging Time | 1.5 hours |
| Connectivity | Bluetooth 5 |
| Microphone | Built-in |
| Control Type | Touch, Voice Control |
| Material | Plastic |
| Dimensions | 2.4 x 4.7 x 5.7 cm |
| Weight | 100 g |
| Battery Composition | Lithium-polymer |
| Water Resistance | Not water resistant |
Warranty and Support
Fresh 'n Rebel products come with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Fresh 'n Rebel website.
If you encounter any issues or have questions regarding your Twins 1 True Wireless Earbuds, please contact Fresh 'n Rebel customer support through their official website or the retailer where you purchased the product. Please have your model number (3TW1) and proof of purchase ready.