Introduction
The CHACEEF Travel Electric Kettle, Model 0911A, is a compact and portable water heating device designed for convenience on the go. With a 350ml capacity and 304 stainless steel interior, it offers multiple temperature settings, a keep-warm function, and an intuitive LED indicator for water temperature visualization. Its double-wall design ensures safe handling and efficient insulation.
Safety Instructions
- Read all instructions before use.
- Do not immerse the kettle base or power cord in water or other liquids.
- Ensure the power outlet voltage matches the kettle's specifications (100-240V).
- Always turn off the power and unplug the kettle before cleaning or when not in use.
- Exercise caution when handling hot water. Do not open the lid immediately after boiling water due to steam pressure. Allow it to stand for 5 minutes before opening.
- Keep out of reach of children.
- Do not operate the kettle if the power cord or plug is damaged.
- Only fill water up to the MAX line indicated inside the kettle. If boiling with the lid on, fill only up to two-thirds of the capacity to prevent overflow.
Product Overview
The CHACEEF Travel Electric Kettle is designed for ease of use and portability. Key components and features include:
- 304 Stainless Steel Inner Liner: Ensures food-grade safety and prevents plastic contamination.
- Double-Wall Structure: Provides insulation to keep the exterior cool to the touch and reduce boiling noise.
- Leakage Proof Lid: Features a sealing ring to prevent spills, even when inverted.
- Vent Hole: Located on the lid to safely release steam pressure during operation.
- LED Indicator: A vertical light strip that changes color to indicate water temperature.
- Touch Button Control: For powering on/off and selecting temperature modes.
- Detachable Power Plug: For easy storage and portability.
- Silicone Pad: On the base for stability.

Setup
- Initial Cleaning: Before first use, wash the interior of the kettle with warm water and a mild detergent. Rinse thoroughly.
- Fill Water: Open the lid and fill the kettle with water. Observe the MAX fill line inside. If boiling with the lid on, do not exceed two-thirds of the capacity.
- Secure Lid: Ensure the lid is securely fastened to prevent leakage.
- Connect Power: Plug the detachable power cord into the kettle's port and then into a compatible electrical outlet.

Operating Instructions
The kettle offers multiple modes for heating water to your desired temperature.
- Power On: Once plugged in, the kettle will display the current water temperature.
- Select Temperature Mode: Press the power button (ON/OFF) to cycle through the available modes:
- Boil Water: Heats water to 212°F (Red LED).
- Coffee Mode: Heats water to 195°F (Red LED).
- Tea Mode: Heats water to 176°F (Orange LED).
- Keep Warm: Maintains water temperature at approximately 113°F (Blue LED).
- Start Heating: After selecting your desired mode, the kettle will automatically begin heating. The LED indicator will change color according to the temperature range.
- Automatic Shut-Off & Keep Warm: Once the water reaches the selected temperature, the kettle will automatically shut off the heating element and, in some modes, switch to the Keep Warm function.


Maintenance & Cleaning
Proper maintenance ensures the longevity and hygiene of your kettle.
- Hand Wash Only: The kettle is not dishwasher safe. Hand wash the interior with warm, soapy water.
- Exterior Cleaning: Wipe the exterior with a damp cloth. Do not use abrasive cleaners or immerse the base in water.
- Descaling: Over time, mineral deposits may accumulate. To descale, fill the kettle with a mixture of water and white vinegar (or a commercial descaling solution) and let it sit for a few hours or boil the mixture. Rinse thoroughly afterward.

Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not heat. | Not properly plugged in; power outage; incorrect mode selected. | Check power connection; ensure outlet is functional; re-select heating mode. |
| Water not boiling to 212°F. | Incorrect temperature mode selected; mineral buildup. | Ensure 'Boil Water' mode is selected; descale the kettle. |
| Water leaks from the lid. | Lid not securely fastened; overfilled. | Ensure lid is tightly screwed on; do not overfill, especially when boiling with lid. |
| Unpleasant taste/odor in water. | New product odor; mineral buildup. | Perform several boiling cycles with fresh water; descale if necessary. |

Specifications
| Feature | Detail |
|---|---|
| Brand | CHACEEF |
| Model Name | 0911A |
| Capacity | 350 Milliliters |
| Material | 304 Stainless Steel |
| Color | White |
| Special Features | 304 Stainless Steel Inner Liner, Automatic Shut-Off, Indicator Light, Programmable, Rapid Boil |
| Product Dimensions | 2.9"L x 2.9"W x 8.8"H |
| Item Weight | 1.5 Pounds |
| Cable Length | 83 Centimeters |
Warranty & Support
For warranty information or product support, please refer to the documentation included with your purchase or contact CHACEEF customer service. Keep your proof of purchase for any warranty claims.