SR169016 R169016 Filter Clip Kit User Manual

1. Product Overview

The SR169016 R169016 Filter Clip Kit is designed as a direct replacement for damaged or missing filter clips in compatible range hoods. These clips are crucial for securely holding the range hood filter in place, ensuring proper ventilation and filtration. Made from durable aluminum, this kit provides a reliable solution for maintaining your appliance's functionality.

Image: Three SR169016 R169016 filter clips, showcasing their design and material.

2. Compatibility

This filter clip kit is compatible with a wide range of Broan and Kenmore/Sears range hood models. It replaces part numbers AP3380265, R169001, and SR169001.

Compatible Brands:

• Broan (including ALLURE, ALLUREQS3, QS series, WS series)
• Kenmore / Sears (including various 233.xxxx and 233.5xxxx series models)

For a comprehensive list of compatible models, please refer to the product listing or contact customer support.

Image: Visual representation highlighting compatibility with Broan and Kenmore brands.

3. Installation Instructions

Before beginning any repair, always prioritize safety. Ensure the appliance is completely disconnected from its power source to prevent electrical shock or injury.

Image: A warning label emphasizing the importance of disconnecting power before replacing filter clips.

Required Tools:

• None typically required, as clips are designed for easy snap-in replacement.
• Gloves (optional, for protection)

Step-by-Step Replacement:

1. Disconnect Power: Locate the circuit breaker for your range hood and turn off the power. Alternatively, unplug the range hood if accessible.
2. Remove Old Filter (if present): Carefully unlatch or slide out the existing range hood filter. If the clips are broken, the filter may already be loose.
3. Remove Damaged Clips: If any parts of the old clips remain, gently remove them from their mounting points on the range hood.
4. Install New Clips: Align the new SR169016 filter clips with the designated slots or holes on the range hood frame. Press firmly until each clip snaps securely into place. Ensure they are oriented correctly to hold the filter.
5. Reinstall Filter: Insert the range hood filter, ensuring it sits properly within the frame and is held firmly by the newly installed clips. The clips should engage with the filter to prevent it from falling.
6. Restore Power: Once the filter is securely in place, restore power to the range hood by flipping the circuit breaker back on or plugging it in.
7. Test Functionality: Verify that the filter is held firmly and does not sag or fall.

4. Maintenance and Care

To ensure the longevity and proper function of your SR169016 filter clips, consider the following:

• Regular Inspection: Periodically check the clips for any signs of wear, bending, or damage, especially when cleaning or replacing your range hood filters.
• Cleaning: If the clips become greasy or dirty, gently wipe them with a damp cloth and mild detergent. Ensure they are dry before re-engaging with the filter.
• Avoid Force: When removing or installing filters, avoid excessive force on the clips, as this can cause them to bend or break.

5. Troubleshooting

6. Specifications

• Part Number: SR169016
• Replaces: AP3380265, R169001, SR169001
• Brand: PartsBroz
• Material: Aluminum
• Compatible Device: Range Hood
• Item Weight: 1.34 ounces
• Package Dimensions: 6.77 x 5.87 x 0.79 inches
• Global Trade Identification Number (GTIN): 00850035706558

7. Warranty and Support

PartsBroz stands behind the quality of its products. This filter clip kit comes with a 365-day return policy, ensuring your satisfaction.

For any questions regarding compatibility, installation, or troubleshooting, our dedicated support specialists are available to provide free technical support. We aim to make your repair process as smooth and affordable as possible.

Image: Our support specialists are ready to assist with any inquiries.

You can visit the PartsBroz Store for more information or to explore other appliance parts.