1. Product Overview
The SQlab 6OX Ergowave Active saddle is engineered for E-MTB and gravity riding, combining features from the successful ERGOWAVE and ERGOLUX saddle models. Its design focuses on ergonomic support and pressure relief for enhanced comfort during demanding rides.
Key Features:
- Ergowave Design: The wavy rise from back to front is shaped to fit the sit bones, significantly reducing pressure in the perineum area.
- Active Saddle Technology: Allows the saddle to follow the natural pedal movement, which can increase comfort, mobilize spinal discs, and minimize pressure on the sit bones.
- Optimized Saddle Nose: A low-level, flat, and wide saddle nose provides better pressure relief, especially during prolonged climbs.
- Grip Material: Integrated grip material on the raised step enhances rearward support.
- Unisex Design: The SQlab step saddle concept and saddle width system eliminate the need for separate men's and women's saddles.
- Perineum Relief: Offers up to 72% relief in the perineal area.
- Robust Construction: Features a durable saddle cover and stable edges suitable for rigorous use.
2. Installation Guide
Proper installation is crucial for comfort and performance. Ensure your bike is stable before beginning.
Required Tools:
- Appropriate Allen key (usually 5mm or 6mm) for seatpost clamp bolts.
- Torque wrench (recommended for precise tightening).
Installation Steps:
- Remove Old Saddle: Loosen the bolts on your seatpost clamp and carefully remove the existing saddle. Note the previous saddle's height and angle for reference.
- Measure Sit Bone Width: For optimal comfort, ensure you have selected the correct saddle width based on your sit bone measurement. SQlab offers tools for this measurement.
- Attach New Saddle: Place the rails of the SQlab 6OX Ergowave Active saddle into the seatpost clamp. Do not tighten the bolts fully yet.
- Adjust Position:
- Height: Set the saddle height to your preferred riding position.
- Fore/Aft: Adjust the saddle forward or backward to achieve a balanced riding position over the pedals.
- Angle: Start with the saddle level. The Ergowave design is intended to be ridden with a relatively flat angle. Fine-tune the tilt slightly forward or backward based on comfort, ensuring no excessive pressure on the perineum or sit bones.
- Tighten Bolts: Once the position is set, tighten the seatpost clamp bolts securely. If using a torque wrench, refer to your seatpost manufacturer's specifications for the correct torque values. Over-tightening can damage components.
- Test Ride and Fine-Tune: Take a short test ride to assess comfort. Make small adjustments to height, fore/aft, and angle as needed. It may take a few rides to find the optimal position.
Image 1: Top-down view of the SQlab 6OX Ergowave Active saddle, showcasing its ergonomic shape and textured grip areas. This view highlights the Ergowave contour designed for pressure distribution.
Image 2: Underside view of the SQlab 6OX Ergowave Active saddle, displaying the S-tube rails and the mechanism for the active saddle technology. This perspective is useful for understanding how the saddle attaches to a seatpost.
3. Usage and Ergonomics
The SQlab 6OX Ergowave Active saddle is designed to provide comfort and support during various cycling activities, particularly E-MTB and gravity riding. The unique Ergowave shape supports the sit bones effectively, while the lowered saddle nose reduces pressure on sensitive soft tissues. The active saddle technology allows for slight lateral movement, which can enhance comfort on longer rides by engaging the pelvis naturally.
Ensure your saddle width is correctly chosen for your sit bone measurement to fully benefit from the ergonomic design. The saddle is available in 13 cm, 14 cm, 15 cm, and 16 cm widths to accommodate different anatomies.
4. Care and Maintenance
Regular care helps maintain the saddle's condition and extends its lifespan.
- Cleaning: Clean the saddle regularly with a soft cloth, mild soap, and water. Avoid harsh chemicals or abrasive cleaners, as these can damage the saddle cover.
- Inspection: Periodically inspect the saddle for any signs of wear, tears, or damage to the cover, rails, or active mechanism.
- Bolt Tightness: Check the seatpost clamp bolts periodically to ensure they remain securely tightened to the manufacturer's specifications.
- Storage: Store your bicycle in a dry environment, away from direct sunlight and extreme temperatures, to prevent material degradation.
5. Troubleshooting
If you encounter issues with your SQlab 6OX Ergowave Active saddle, consider the following common solutions:
| Issue | Possible Cause | Solution |
|---|---|---|
| Discomfort or pain in sit bones | Incorrect saddle width, improper angle, or adaptation period needed. | Verify correct saddle width. Adjust saddle angle slightly. Allow time for your body to adapt to the new saddle shape. |
| Numbness or pressure in the perineal area | Saddle tilted too far back, or incorrect fore/aft position. | Ensure the saddle is level or slightly tilted forward. Adjust fore/aft position to ensure sit bones are properly supported on the wider rear section. |
| Saddle creaking noise | Loose seatpost clamp bolts, dry rails, or dirt in the clamp mechanism. | Check and re-tighten seatpost clamp bolts to specified torque. Clean saddle rails and seatpost clamp area. Apply a thin layer of grease to the rails where they contact the clamp. |
6. Technical Specifications
| Brand | SQlab |
| Model Name | 6OX Ergowave Active |
| Material | Plastic (Outer Material: plastic) |
| Pad Type | Gel Pad |
| Available Widths | 13 cm, 14 cm, 15 cm, 16 cm |
| Length | 280 mm |
| Item Weight | Approximately 0.29 Kilograms (270g - 295g depending on width) |
| Weight Limit | 110 Kilograms |
| Perineum Area Relief | 72% |
| Struts Material | S-tube |
| Suggested Users | Unisex |
| Model Year | 2018 |
| GTIN | 04260086855017 |
7. Warranty and Support
For specific warranty information regarding your SQlab 6OX Ergowave Active saddle, please refer to the documentation included with your purchase or visit the official SQlab website. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
For technical support, product inquiries, or assistance with warranty claims, please contact SQlab customer service directly through their official website or authorized distributors. Always provide your product model and purchase details when seeking support.