Introduction
Thank you for choosing the Mia&Coco Electric Heated Blanket, model OB-008. This blanket is designed to provide warmth and comfort with its soft flannel and sherpa material, 10 adjustable heat settings, and a convenient 9-hour auto-off timer. Please read this manual carefully before use to ensure safe and optimal operation of your heated blanket.
The Mia&Coco Electric Heated Blanket features soft, skin-friendly flannel and sherpa material for maximum comfort.
Setup Instructions
- Unpack: Carefully remove the heated blanket from its packaging. Retain the packaging for future storage or transport.
- Inspect: Before first use, visually inspect the blanket and the control unit for any signs of damage. Do not use if any damage is observed.
- Connect Controller: Ensure the blanket is laid flat. Locate the connector on the blanket and firmly plug the control unit cable into it. Ensure a secure connection.
- Placement: Place the heated blanket on your bed, sofa, or desired surface. Ensure the control unit is easily accessible and not covered by the blanket or other items.
- Power Connection: Plug the power cord of the control unit into a standard electrical outlet.
The blanket can be used in various settings, such as a bed blanket, sofa blanket, shoulder blanket, or knee blanket.
Operating Instructions
Powering On/Off
- To Turn On: Press the power button on the control unit. The LED display will illuminate, showing the current heat setting.
- To Turn Off: Press the power button again. The LED display will turn off, indicating the blanket is no longer heating.
Adjusting Temperature
- The blanket offers 10 heat levels, ranging from 1 (lowest) to 9, and 'H' (highest).
- Press the temperature adjustment button (usually marked with a '+' or '-' or a single button to cycle) to select your desired heat level.
- The temperature range is approximately 25°C to 53°C.
The control unit features a clear LED display for easy temperature selection, offering 10 levels from 25°C to 53°C.
Setting the Auto-Off Timer
- The blanket includes an auto-off timer for safety and energy saving, adjustable up to 9 hours.
- Press the timer button on the control unit to cycle through the available timer settings (e.g., 1 hour, 2 hours, up to 9 hours).
- Once the set time expires, the blanket will automatically turn off.
Utilize the 9-hour auto-off timer for energy efficiency and peace of mind.
Maintenance and Care
Washing Instructions
The Mia&Coco Electric Heated Blanket is machine washable. Follow these steps for proper cleaning:
- Detach Cord: Always detach the control unit and power cord from the blanket before washing. Ensure the connector on the blanket is dry before reattaching the control unit.
- Machine Wash: Wash the blanket on a gentle cycle with cold water. Use a mild detergent.
- Do Not Bleach: Do not use bleach or harsh cleaning agents.
Drying Instructions
- Tumble Dry Low: Tumble dry on a low heat setting. Ensure the blanket is completely dry before reattaching the control unit and using it.
- Do Not Iron: Do not iron the heated blanket.
- Air Dry: Alternatively, you can air dry the blanket by laying it flat or hanging it over a line, ensuring it is not stretched or damaged.
The blanket is machine washable; always detach the cord before washing. Follow care symbols: No Bleach, Tumble Dry Low, Do Not Iron.
Storage
When not in use, store the blanket in a cool, dry place. Ensure it is clean and completely dry before folding and storing. Avoid placing heavy objects on top of the folded blanket to prevent damage to the internal heating elements.
Troubleshooting
If you experience issues with your Mia&Coco Electric Heated Blanket, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket not heating. | Power cord not securely plugged in. Control unit not connected properly. Power outlet not working. | Ensure all connections are firm. Test the outlet with another device. Press the power button on the control unit. |
| Control unit display is off. | Blanket is off. Auto-off timer has expired. | Press the power button to turn on. If the timer expired, reset it or turn the blanket back on. |
| Blanket feels too hot or not hot enough. | Incorrect heat setting selected. | Adjust the heat setting using the temperature adjustment button on the control unit. |
If the problem persists after trying these solutions, please contact customer support for further assistance. Do not attempt to repair the blanket or control unit yourself.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Mia&Coco |
| Model Number | OB-008 |
| Color | Blue |
| Dimensions | 200 x 180 cm (2L x 1.8l meters) |
| Material | Flannel |
| Item Weight | 2.81 Kilograms |
| Heat Settings | 10 levels (approx. 25°C to 53°C) |
| Auto-off Timer | Up to 9 hours |
| Safety Certification | ETL Certified |
| Special Features | Skin-friendly, Machine washable |
Warranty Information
Mia&Coco products are manufactured to high-quality standards. For specific warranty details regarding your OB-008 Electric Heated Blanket, please refer to the warranty card included with your product packaging or contact Mia&Coco customer support. Keep your proof of purchase for warranty claims.
Customer Support
If you have any questions, concerns, or require assistance with your Mia&Coco Electric Heated Blanket, please do not hesitate to contact our customer support team. Refer to the contact information provided on your product packaging or the official Mia&Coco website for the most up-to-date support channels.
We are committed to ensuring your satisfaction with our products.