GODOX X2T-S
Godox X2T-S TTL Wireless Flash Trigger User Manual
Model: X2T-S (EA702398)
1. Product Overview
The Godox X2T-S is a versatile TTL wireless flash trigger designed for Sony cameras. It offers comprehensive control over Godox flashes with built-in X wireless radio systems, as well as compatibility with other speedlights and camera shutters via a 3.5mm sync cord. Key features include high-speed sync, multi-flash, manual flash, and flash exposure compensation. The trigger also supports Bluetooth connectivity for app control via the "GodoxPhoto" application on iOS and Android devices.
Figure 1.1: Godox X2T-S TTL Wireless Flash Trigger
2. Key Features
- Wireless Control: Built-in 2.4GHz wireless transmission with a 100m range.
- TTL Autoflash Support: Includes 1/8000s High-Speed Sync (HSS), Multi Flash, Manual Flash, and Flash Exposure Compensation (FEC).
- Bluetooth Connectivity: Control flash modes, power output, modeling light, and beep functions via the "GodoxPhoto" app on iOS/Android devices.
- User-Friendly Interface: Large LCD panel with backlight, 5 dedicated group buttons, and 3 function buttons for quick adjustments.
- Enhanced Design: Features a relocated control-wheel, new hotshoe locking mechanism, and a visible light AF assist beam.
- Connectivity: Equipped with a USB-C port for firmware updates and a 3.5mm sync cord jack for wired connections.
3. Setup Guide
3.1. Battery Installation
The Godox X2T-S uses two AA batteries (not included). Open the battery compartment cover on the side of the unit and insert the batteries, ensuring correct polarity. Close the cover securely.
3.2. Mounting on Camera
Slide the X2T-S onto your camera's hotshoe. Ensure it is fully seated, then engage the new hotshoe locking mechanism by pushing the lever forward until it clicks into place. This secures the trigger to the camera.
Figure 3.2.1: X2T-S mounted on a Sony camera hotshoe.
Figure 3.2.2: Detail of the hotshoe locking mechanism.
3.3. Powering On/Off
Locate the power switch on the side of the unit. Slide it to the "ON" position to power on the trigger. The LCD screen will illuminate. To power off, slide the switch to the "OFF" position.
4. Operating Instructions
4.1. Basic Operation
The X2T-S features a large LCD screen displaying current settings for various flash groups. Use the control-wheel and function buttons to navigate and adjust parameters.
Figure 4.1.1: LCD display showing flash group settings.
4.2. Group and Channel Settings
The X2T-S supports 5 groups (A, B, C, D, E) and 32 channels. Use the dedicated group buttons (A-E) to select and adjust individual groups. Press the "CH" button to change the wireless channel. Ensure your flashes are set to the same channel and group as the trigger for proper communication.
Figure 4.2.1: Top view of the X2T-S with group selection buttons.
Figure 4.2.2: Screen displaying channel and wireless ID settings.
4.3. Bluetooth App Control
Download the "GodoxPhoto" app from your device's app store. Enable Bluetooth on your phone or tablet and on the X2T-S. Pair the devices through the app. Once connected, you can control flash modes, power output, modeling light, and the beep function directly from your mobile device. This is particularly useful for studio setups where the trigger might be hard to reach.
Figure 4.3.1: Bluetooth connectivity for app control.
4.4. Flash Modes and Functions
- TTL Autoflash: Automatically sets flash output for correct exposure.
- Manual Flash: Allows precise manual control over flash power.
- Multi Flash (Stroboscopic): Fires a series of rapid flashes for multiple exposures in one frame.
- High-Speed Sync (HSS): Enables flash synchronization at shutter speeds faster than the camera's native sync speed (up to 1/8000s).
- Flash Exposure Compensation (FEC): Adjusts flash output in 1/3 stop increments.
- TCM Function: Converts TTL flash value to manual power output.
Figure 4.4.1: Example of multi-flash photography.
4.5. AF Assist Light
The X2T-S features a new AF assist light that uses visible light to aid in focusing in low-light conditions. This light automatically activates when needed.
Figure 4.5.1: Side view highlighting the AF assist light.
4.6. Sync Port Usage
The 3.5mm sync cord jack allows the X2T-S to trigger flashes that do not have a built-in Godox X wireless system, or to function as a wired shutter release trigger for compatible cameras.
Figure 4.6.1: Various triggering applications including 3.5mm sync cord usage.
Figure 4.6.2: Side view showing the USB-C and 3.5mm sync ports.
5. Compatibility
The Godox X2T-S is primarily designed for Sony cameras with MI Shoes (Multi-Interface Shoes). Tested compatible camera models include:
- Sony Alpha a7, a7R, a7 Mark II, a7R Mark II, a7M3, a7M2, a7RIII
- Sony Alpha a58, a9, a99
- Sony ILCE-6000L, a6500
- Sony a350, DSC-RX10
- And other Sony series cameras (self-test recommended for untested models).
It can remote control Godox Flashes such as V1, SK300, SK400II, TT350, TT600, TT685, V860II, AD200, AD200pro, AD400pro, AD600BM, AD600B, AD600pro, etc.
6. Specifications
| Feature | Specification |
|---|---|
| Model | X2T-S (EA702398) |
| Compatible Cameras | Sony cameras with MI Shoes |
| Wireless Frequency | 2.4GHz |
| Transmission Range | Approx. 0-100m |
| Channels | 32 |
| Wireless ID | 01-99 |
| Groups | 5 (A, B, C, D, E) |
| Flash Modes | TTL Autoflash, Manual Flash, Multi Flash |
| High-Speed Sync (HSS) | Up to 1/8000s |
| Flash Exposure Compensation (FEC) | ±3 stops in 1/3 stop increments |
| Focus Assist | Yes (Visible Light AF Assist) |
| Modeling Lamp Control | Yes |
| Beeper | Yes |
| Firmware Upgrade | USB-C Port |
| Dimensions | 3.23 x 4.45 x 5.51 inches |
| Item Weight | 5.3 ounces |
| Power Source | 2x AA Batteries (DC3V) |
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the trigger. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive cleaners.
- Storage: When not in use for extended periods, remove the batteries to prevent leakage and corrosion. Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
- Hotshoe Contacts: Keep the hotshoe contacts clean and free of debris to ensure reliable connection with the camera.
- Firmware Updates: Periodically check the official Godox website for firmware updates. Updates can improve performance, add new features, or fix bugs. Use the USB-C port for firmware upgrades.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Trigger does not power on. | Batteries are dead or incorrectly installed. | Replace batteries or ensure correct polarity. |
| Flashes not firing. | Incorrect channel/group settings; flashes not powered on; trigger not securely mounted. | Verify channel and group settings on both trigger and flashes. Ensure flashes are powered on. Re-mount trigger securely on camera hotshoe. |
| Bluetooth connection issues. | Bluetooth not enabled on device/trigger; app not installed; interference. | Ensure Bluetooth is active on both devices. Reinstall "GodoxPhoto" app. Move away from other wireless devices. |
| Inconsistent flash output. | Low battery; interference; distance too far. | Replace batteries. Reduce distance between trigger and flashes. Minimize wireless interference. |
| LCD screen blank or unresponsive. | Software glitch; severe battery drain. | Remove and reinsert batteries. If problem persists, check for firmware updates or contact support. |
9. Warranty and Support
For warranty information and technical support, please refer to the official Godox website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.
Manufacturer: Godox
Country of Origin: China
Contact Information:
- GODOX Photo Equipment Co., Ltd.
- Add: 1st to 4th Floor, Building 2 / 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen, China
- Tel: +86-755-29609320(8062)
- Fax: +86-755-25723423
- E-mail: godox@godox.com
- Official Website: www.godox.com
- WeChat: http://weixin.qq.com/r/vEPI0F7ERgM5rRqz9xau
European Representative (EC REP):
- APEX CE SPECIALISTS LIMITED
- UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK T23 AT2P, IRELAND
- E-mail: whw@godox.com
- Tel: +86 (0755) 23210502
UK Representative (UK REP):
- APEX CE SPECIALISTS LIMITED
- 89 Princess Street, Manchester, M1 4HT, UK
- E-mail: whw@godox.com
- Tel: +86 (0755) 23210502