Introduction
This manual provides essential information for the safe operation, installation, and maintenance of your HOMCOM 17" Freestanding Electric Fireplace Stove, Model 820-282V80WT. Please read all instructions carefully before use and retain this manual for future reference.
Image: The HOMCOM 17" Freestanding Electric Fireplace Stove, showcasing its compact design and realistic flame effect.
Important Safety Information
To reduce the risk of fire, electric shock, or injury, observe the following safety precautions:
- Read all instructions before using this appliance.
- This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Always use a properly grounded electrical outlet.
- Do not operate any heater with a damaged cord or plug, or if the heater malfunctions or has been dropped or damaged in any manner.
- Do not run power cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This electric fireplace is equipped with an overheat protection feature that automatically shuts off the unit if it reaches an unsafe temperature. If this occurs, unplug the unit, allow it to cool, and check for any obstructions before restarting.
- The exterior surface of the unit remains cool to the touch during operation, enhancing safety.
- Ensure the unit is placed on a stable, level surface to prevent accidental tipping. The unit includes tip-over protection.
- When using an extension cord, ensure it is rated for 14 AWG or 12 AWG to handle the heater's wattage safely.
Image: Visual representation of the overheat protection feature, indicating automatic shut-off for safety.
Setup Instructions
The HOMCOM Electric Fireplace Stove is designed for freestanding installation and requires minimal assembly.
- Unpacking: Carefully remove all components from the packaging. Retain packaging materials for future storage or transport.
- Leg Attachment: Attach the four legs to the base of the fireplace unit. Align the screw holes on the legs with those on the unit and secure them using a Philips head screwdriver. Ensure all screws are tightened firmly for stability.
- Placement: Place the assembled fireplace on a firm, level surface. Ensure there is adequate clearance from combustible materials (curtains, furniture, bedding) as specified by local safety codes. Do not block the air intake or exhaust vents located at the bottom of the unit.
- Power Connection: Plug the power cord directly into a 120V, 60Hz grounded electrical outlet. Avoid using power strips or extension cords unless they are heavy-duty (14 AWG or 12 AWG) and rated for the appliance's wattage.
Image: Detail of the fireplace leg, illustrating the attachment point to the main unit.
Operating Instructions
Your HOMCOM electric fireplace offers both heating and flame effects, which can be operated independently.
Control Panel Overview
The control panel is typically located on the side or back of the unit. It includes switches for power, heat settings, and flame effect.
Image: Detailed view of the control panel, showing the ON/OFF switch and two heat setting switches (I and II).
Image: Diagram illustrating the functions of the control panel components: Main Power switch, Heat Setting switches, and Temperature Control dial.
Powering On/Off
- Locate the main ON/OFF switch on the control panel.
- Flip the switch to "ON" to power the unit.
- Flip the switch to "OFF" to turn off the unit.
Adjusting Heat Settings
The fireplace offers two heat settings: 750W and 1500W.
- With the main power ON, engage switch "I" for the 750W heat setting.
- Engage switch "II" (in addition to "I") for the 1500W heat setting.
- To turn off heating, disengage both switches "I" and "II".
- The unit is capable of heating an area of approximately 161-215 sq. ft.
Image: Illustration of the adjustable heating feature, demonstrating how to select between 750W and 1500W settings.
Flame Effect Operation
The realistic flame effect can be operated independently of the heating function.
- To activate the flame effect, ensure the main power switch is ON. The flame effect will typically start automatically.
- Some models may include a separate switch or dial for flame brightness adjustment. Refer to your unit's specific controls.
Image: The electric fireplace showcasing its realistic dancing flame effect, which can be used without heat.
Image: Visual demonstration of adjustable flame brightness, allowing customization of the ambiance.
Maintenance
Regular maintenance ensures optimal performance and longevity of your electric fireplace.
- Cleaning: Always unplug the appliance before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or sprays.
- Vents: Periodically check and clean the air intake and exhaust vents to ensure they are free from dust and debris. Blocked vents can lead to overheating.
- Storage: If storing the fireplace for an extended period, unplug it and store it in a cool, dry place, preferably in its original packaging.
Troubleshooting
If you encounter issues with your electric fireplace, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power, main switch off, or tripped circuit breaker. | Ensure the power cord is securely plugged in. Check the main ON/OFF switch. Reset the circuit breaker if necessary. |
| No heat output. | Heat settings not engaged, or overheat protection activated. | Verify that heat switches "I" and/or "II" are engaged. If the unit recently shut off, unplug it, allow it to cool for 10-15 minutes, and check for blocked vents before restarting. |
| Flame effect is dim or not working. | Main power off, or flame effect component issue. | Ensure the main power switch is ON. If the issue persists, contact customer support. |
| Unusual noise during operation. | Minor fan noise is normal; excessive noise may indicate an issue. | Ensure the unit is on a stable surface. If the noise is loud or unusual, discontinue use and contact customer support. |
Specifications
| Brand | HOMCOM |
| Model Number | 820-282V80WT |
| Product Dimensions (D x W x H) | 9" x 14.75" x 17.25" |
| Item Weight | 6 lbs |
| Power Source | Corded Electric |
| Power Output | 750 W / 1500 W |
| Heat Output | 5118 BTU |
| Heating Coverage | Up to 215 sq. ft. |
| Material | Plastic |
| Color | White |
| Installation Type | Freestanding |
| Special Features | Realistic Flame Effect, Overheat Protection, Tip-over Protection |
| UPC | 196393002186 |
Image: Dimensional diagram of the electric fireplace, indicating its height, width, and depth.
Warranty and Customer Support
This HOMCOM electric fireplace comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official HOMCOM website.
If you require assistance with setup, operation, troubleshooting, or warranty claims, please contact HOMCOM customer support. You can typically find contact information on the product packaging, the HOMCOM website, or through your retailer (e.g., Aosom Direct).
When contacting support, please have your model number (820-282V80WT) and purchase information readily available.