Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Outdoor Lifestyles Courtyard 36-inch Traditional Outdoor Fireplace with IntelliFire Ignition. This single-sided unit features a clean-face design, recessed hearth, and comes equipped with stainless steel mesh curtain screens, an electrical wiring harness, and a flexible gas connector with shut-off. It delivers 55,000 BTUs of heat and offers a 36" x 30-3/4" viewing area. Please read all instructions carefully before installation and use.
Product Overview
Safety Information
Always prioritize safety when operating any fuel-powered appliance. Failure to follow these guidelines can result in property damage, injury, or death.
- Read and understand the entire manual before installation or operation.
- Ensure proper ventilation as this is a vent-free unit.
- Keep combustible materials at a safe distance from the fireplace opening.
- Do not store gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
- Never leave a burning fireplace unattended.
- Children and pets should be kept away from the hot surfaces of the fireplace.
- Only use the type of fuel specified for this appliance (Gas).
- Regularly inspect the gas connections and electrical wiring for any signs of wear or damage.
Setup
The Outdoor Lifestyles Courtyard fireplace is designed for wall-mount installation. Professional installation by a qualified technician is highly recommended to ensure safety and compliance with local codes.
Pre-Installation Checks:
- Verify that the installation location meets all clearance requirements for combustible materials.
- Ensure the gas supply line is properly sized and routed to the fireplace location.
- Confirm electrical access for the IntelliFire Ignition system and outdoor control box.
- Unpack all components and inspect for any shipping damage.
Installation Steps:
- Prepare the Opening: Construct a framed opening according to the dimensions provided in the detailed installation manual (not included here). Ensure the opening is level and plumb.
- Position the Fireplace: Carefully slide the fireplace into the prepared opening. Secure it in place using the provided mounting brackets or screws.
- Connect Gas Line: Attach the flexible gas connector to the fireplace's gas inlet and the main gas supply line. Ensure all connections are tight and leak-free. Perform a leak test using a non-corrosive leak detection solution.
- Electrical Wiring: Connect the 6-foot electrical wiring harness to the IntelliFire Ignition system and route it to the outdoor control box. Connect the control box to a suitable power source as per local electrical codes.
- Install Wall Switch: Mount the wall switch in a convenient outdoor location, connecting it to the outdoor control box.
- Install Interior Components: If purchased separately, install the grate and log set according to their specific instructions to achieve the traditional look.
- Final Checks: Before first use, double-check all connections, ensure no obstructions are present, and confirm the mesh curtain screens operate smoothly.
Operating Instructions
Your Outdoor Lifestyles Courtyard fireplace is equipped with an IntelliFire Ignition system for convenient and reliable starting.
To Turn On:
- Ensure the gas supply valve is open.
- Locate the wall switch connected to the outdoor control box.
- Flip the wall switch to the 'ON' position. The IntelliFire system will initiate the ignition sequence, and the burner will light.
- Allow a few moments for the flames to stabilize.
To Turn Off:
- Flip the wall switch to the 'OFF' position. The flames will extinguish.
- For extended periods of non-use, it is recommended to close the main gas supply valve to the fireplace.
Maintenance
Regular maintenance ensures the longevity and safe operation of your fireplace.
- Annual Inspection: Have a qualified service technician inspect the fireplace annually, including gas connections, burner, ignition system, and electrical components.
- Cleaning: Ensure the fireplace is completely cool before cleaning. Use a soft, damp cloth to wipe down exterior surfaces. For the interior, gently brush off any dust or debris from the logs and burner area. Do not use abrasive cleaners.
- Mesh Curtain Screens: Periodically clean the stainless steel mesh curtain screens with a mild soap and water solution. Ensure they are dry before operating the fireplace.
- Log Set: Handle the ceramic log set with care as it can be fragile. If logs become discolored or damaged, consult your dealer for replacement.
Troubleshooting
Refer to the table below for common issues and their potential solutions. If the problem persists, contact a qualified service technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fireplace does not ignite. | No gas supply. | Ensure main gas valve is open. |
| Electrical issue with IntelliFire system. | Check electrical connections and outdoor control box power. | |
| Flames are weak or irregular. | Low gas pressure. | Contact gas provider or qualified technician. |
| Obstructed burner ports. | Clean burner ports when fireplace is cool. | |
| Pilot light goes out. | Drafts or insufficient oxygen. | Ensure adequate ventilation; check for strong drafts. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Hearth and Home Technologies |
| Model Name | Courtyard 36 |
| Item Model Number | ODCOUG-36 |
| UPC | 652174898664 |
| Power Source | Fuel Powered (Gas) |
| Heat Output | 55,000 British Thermal Units |
| Viewing Area | 36" x 30-3/4" |
| Installation Type | Wall Mount |
| Ventilation Type | Vent Free |
| Material | Glass, Stainless Steel |
| Included Components | Electrical Wiring Harness (6'), Flexible Gas Connector with Shut-Off, Wall Switch with Outdoor Control Box (15'), Stainless Steel Mesh Curtain Screens. (Note: Grate and Log Set sold separately for traditional look) |
| Chamber Depth | 14.88 Inches |
| Heating Coverage | 281 sq ft |
Warranty and Support
This product comes with a Limited Warranty. Please refer to the specific warranty documentation provided with your purchase for full terms and conditions, including coverage details and duration. Typically, warranty claims require proof of purchase and may necessitate professional inspection.
For technical support, parts, or warranty inquiries, please contact Hearth and Home Technologies customer service or your authorized dealer. Ensure you have your model number (ODCOUG-36) and proof of purchase readily available when contacting support.
Customer Support:
- Website: Visit the official Hearth and Home Technologies website for support resources and contact information.
- Phone: Refer to your product packaging or the manufacturer's website for the most current customer service phone number.