Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your YITAHOME Coat Rack with Entryway Bench, Model FTLFCR-0010. Please read these instructions carefully before assembly and use to ensure safe and proper functionality. Keep this manual for future reference.
Image: The YITAHOME Coat Rack with Entryway Bench, featuring a rustic brown finish and black metal frame, positioned in a modern entryway. It includes coat hooks, a grid memo board, a seating bench, shoe storage, and side shelves.
Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly, as this may damage the material.
- Distribute weight evenly across shelves and hooks. Do not exceed the maximum weight capacity for any component.
- For safety, it is recommended to secure the unit to a wall using the provided anti-tipping strap.
- Keep small parts away from children during assembly.
Image: A close-up view demonstrating the installation of the anti-tipping strap, showing it secured to the metal frame and a wall anchor.
Parts List
Please verify that all components listed below are included in your package before beginning assembly. Refer to the assembly diagram for visual identification of parts.
- Metal Frame Components
- Wooden Boards (for bench, shelves, and hook panel)
- Coat Hooks
- Grid Memo Board
- Fabric Drawers (2 units)
- Adjustable Feet
- Anti-Tipping Strap and Hardware
- Assembly Hardware (screws, bolts, Allen wrench)
Setup and Assembly
Follow these steps carefully to assemble your coat rack with entryway bench.
- Unpack and Identify Parts: Lay out all components on a clean, soft surface. Compare them with the parts list to ensure everything is present.
- Assemble the Main Frame: Connect the metal frame components according to the provided diagram. Secure with the appropriate screws, but do not fully tighten until the entire frame is assembled.
- Attach Wooden Boards: Secure the wooden bench and shelf boards to the metal frame. Ensure they are aligned correctly before tightening screws.
- Install Coat Hooks and Grid Board: Attach the wooden panel with coat hooks to the upper section of the frame. Install the grid memo board below the hooks.
- Insert Fabric Drawers: Fold and insert the two fabric drawers into their designated compartments under the bench.
- Adjust Feet: Screw in the adjustable feet at the bottom of the frame. Adjust them to ensure the unit is stable and level on uneven floors.
- Secure with Anti-Tipping Strap: For added stability and safety, attach the anti-tipping strap to the top rear of the unit and secure it to a wall stud.
Image: A detailed diagram illustrating the six primary features of the hall tree: hanging rod, grid memo board, shoe bench, shoe shelf, fabric dressers, and side shelves.
Image: A close-up showing an adjustable foot being rotated to level the unit and prevent floor scratches.
Operating Instructions
Your YITAHOME Coat Rack with Entryway Bench is designed for versatile storage and organization.
- Coat Hooks: Use the sturdy hooks to hang coats, hats, scarves, and bags.
- Grid Memo Board: Utilize the grid board with S-hooks (not included) to hang keys, small accessories, or display notes.
- Entryway Bench: The wooden bench provides a convenient spot to sit while putting on or taking off shoes. Maximum weight capacity for the bench is 220 lbs.
- Shoe Shelf: The lower metal grid shelf is ideal for organizing shoes, keeping your entryway tidy.
- Fabric Drawers: The two detachable and foldable fabric drawers offer concealed storage for smaller items like gloves, socks, or other personal belongings.
- Side Shelves: The multi-tiered side shelves are suitable for displaying decorative items, storing books, or organizing everyday essentials.
Image: A person sitting comfortably on the entryway bench, tying their shoes, demonstrating the practical use of the bench and shoe storage area.
Image: A close-up view of the sturdy metal coat hooks mounted on a rustic wooden panel, ready for hanging garments.
Image: A close-up of the metal grid memo board, equipped with S-hooks for hanging small items or displaying notes.
Image: A split image showing the foldable fabric drawers with items inside, and the open space below the bench designed for taller items like boots.
Maintenance
Proper care will extend the life and appearance of your coat rack.
- Cleaning: Clean the coat rack surfaces with a wet rag. For stubborn marks, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Dusting: Regularly dust all surfaces with a soft, dry cloth.
- Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary.
- Fabric Drawers: The fabric drawers can be spot cleaned with a damp cloth and mild detergent. Allow to air dry completely.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit is wobbly or unstable. | Uneven floor; loose screws; adjustable feet not properly set. | Adjust the leveling feet until the unit is stable. Ensure all screws are tightened. Secure the unit to the wall using the anti-tipping strap. |
| Parts do not fit together. | Incorrect orientation of parts; wrong hardware used. | Review the assembly instructions and diagrams carefully. Ensure parts are oriented correctly. Use the specified hardware for each step. |
| Drawers do not slide smoothly. | Drawers are overloaded; fabric is creased. | Reduce the weight in the drawers. Reshape the fabric drawers if they are creased or misshapen. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | FTLFCR-0010 |
| Dimensions (L x W x H) | 47 x 17 x 70 inches |
| Item Weight | 53.2 pounds |
| Material | Alloy Steel, Engineered Wood |
| Color | Rustic Brown |
| Number of Shelves | 5 |
| Number of Drawers | 2 |
| Bench Weight Capacity | 220 lbs |
| Shelf Weight Capacity (each) | 11 lbs (side shelves), 3.3 lbs (top shelves) |
Image: A diagram detailing the overall dimensions of the hall tree and the individual weight capacities for the bench and various shelves.
Warranty Information
YITAHOME products are manufactured with quality and durability in mind. For specific warranty details regarding your FTLFCR-0010 Coat Rack with Entryway Bench, please refer to the warranty card included with your purchase or visit the official YITAHOME website. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing or damaged parts, please contact YITAHOME customer support. Contact information can typically be found on the packaging, the YITAHOME website, or through your retailer's customer service portal.
