Important Safety Information
- Maximum Weight Capacity: This bed frame is designed to support a maximum weight of 880 pounds. Do not exceed this limit.
- Adult Assembly Required: Assembly should be performed by adults. Keep small parts away from children during assembly.
- Regular Checks: Periodically inspect all bolts and connections to ensure they remain tight and secure.
- Stable Surface: Ensure the bed frame is placed on a flat, stable surface.
- No Jumping: Do not jump on the bed frame.
Package Contents
Please verify that all components listed below are present before beginning assembly. Refer to the included parts list for detailed identification of each piece and hardware.
- Headboard (Velvet Upholstered)
- Footboard (Velvet Upholstered)
- Side Rails (Velvet Upholstered)
- Center Support Bar
- Wooden Support Legs (4 pieces)
- Metal Support Legs (5 pieces)
- Wooden Slats (with Velcro attachment)
- Hardware Pack (bolts, washers, Allen key)
Assembly Instructions
Assembly is designed to be straightforward and typically takes about 30 minutes for one adult. No additional tools are required as all necessary hardware and tools are provided. For easier assembly, two adults are recommended.
Step 1: Unpack and Identify Components
Carefully unpack all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided parts list and ensure all pieces are present.
Image: Overview of the LIKIMIO Full Bed Frame components before assembly.
Step 2: Assemble the Headboard
Attach the headboard components together using the designated bolts and the provided Allen key. Ensure all connections are snug but do not overtighten.
Image: Detailed view of the upholstered headboard.
Step 3: Attach Side Rails and Footboard
Connect the side rails to the assembled headboard and then to the footboard. Use the appropriate bolts and tighten them securely. Ensure the frame is aligned correctly.
Image: Detail of the solid wood legs, indicating where they attach to the frame.
Step 4: Install Center Support Bar and Metal Legs
Position the center support bar along the middle of the frame and secure it. Attach the five metal support legs to the center bar and the four wooden legs to the corners of the frame. These provide crucial stability.
Image: View of the metal support structure and legs for enhanced stability.
Step 5: Place Wooden Slats
Lay the wooden slats across the bed frame. The slats are connected by Velcro for easy placement and even spacing. Press down firmly to ensure the Velcro adheres properly to the frame.
Image: The wooden slat system with dimensions, showing how they fit into the frame.
Step 6: Final Check
Once all components are assembled, double-check all bolts and screws to ensure they are securely tightened. Confirm that the bed frame is stable and level before placing a mattress on it.
Operating Instructions
- Mattress Placement: Place your full-size mattress directly onto the wooden slats. A box spring is not required for this platform bed frame.
- Weight Distribution: Distribute weight evenly across the bed frame to maintain structural integrity.
- Under-bed Storage: The bed frame offers approximately 7 inches of clearance underneath, suitable for storing small items or low-profile storage containers.
Image: Illustration of the under-bed storage space.
Maintenance
- Cleaning Velvet Fabric: For general cleaning, gently wipe the velvet upholstered surfaces with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid rubbing.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, strong detergents, or chemical solvents on any part of the bed frame, as these can damage the fabric and finish.
- Tighten Connections: Periodically (e.g., every 3-6 months) re-tighten all screws and bolts to ensure the frame remains sturdy and noise-free.
- Dusting: Regularly dust the frame with a soft, dry cloth.
Image: Detail of the soft velvet fabric used on the bed frame.
Troubleshooting
- Bed Frame is Noisy:
a. Ensure all bolts and screws are securely tightened. Loose connections are a common cause of noise.
b. Verify that the wooden slats are properly seated and not shifting. - Bed Frame Feels Unstable:
a. Re-check all assembly steps to ensure components are correctly installed.
b. Confirm that all support legs (wooden and metal) are firmly touching the floor and are not bent or damaged. - Missing Parts or Damaged Components:
a. If you discover any missing parts or damaged components upon unboxing, do not proceed with assembly.
b. Contact customer support immediately for assistance.
Specifications
| Model Number | HK-FBF-17 |
| Size | Full |
| Material | Metal, Engineered Wood, Velvet Fabric |
| Product Dimensions (L x W x H) | 75" x 54" x 43.3" |
| Item Weight | 67 Pounds |
| Maximum Weight Recommendation | 880 Pounds |
| Color | Beige |
| Assembly Required | Yes |
Customer Support and Warranty
LIKIMIO is committed to providing excellent service. If you encounter any problems with your product, please do not hesitate to contact us. We aim to resolve your issue within 24 hours.
We offer a 60-day free replacement policy for any manufacturing defects or issues. For further assistance or to explore more products, please visit the LIKIMIO Store.
