URSA Fur Circles Mini Windshields for Lavalier Microphones

Introduction

URSA Fur Circles are designed to minimize wind noise and clothing rustle when using lavalier or lapel microphones. These mini windshields provide effective sound protection, ensuring clearer audio recordings in various environments. They are reusable and compatible with a wide range of microphone brands.

Package Contents

• 9x URSA Fur Circles (White)
• 30x URSA Sticky Circles

Image: Contents of the URSA Fur Circles package, including the fur circles and adhesive stickies.

Installation and Usage

1. Attaching Fur Circles

1. Peel one URSA Sticky Circle from its backing.
2. Attach the sticky circle to the base of an URSA Fur Circle, ensuring the adhesive side faces outwards.
3. Carefully place your lavalier microphone onto the center of the sticky circle, ensuring it is securely held.
4. Press the fur circle with the attached microphone onto the desired surface (skin or clothing).

Image: A close-up view of the URSA Fur Circles and the adhesive sticky circles, highlighting their design.

2. Placement for Optimal Performance

For best results in reducing wind noise and clothing rustle, position the fur circle and microphone under clothing. The fur circles are designed to be compressed under tight costumes, minimizing bulk compared to other wind protection solutions.

Image: An example of a lavalier microphone with an URSA Fur Circle attached, positioned on clothing.

Image: Illustration of a lavalier microphone with an URSA Fur Circle placed discreetly under clothing for optimal sound isolation.

3. Reusability

URSA Fur Circles are reusable up to 4 or 5 times, depending on usage and care. The included sticky circles are designed for strong adhesion and can be replaced as needed.

Compatibility

URSA Fur Circles are compatible with a wide range of lavalier and lapel microphones from major brands, including but not limited to:

• Sennheiser
• RODE
• Sanken
• Tascam
• DPA
• GoPro (for external microphone setups)

Specifications

Care and Maintenance

• After use, gently remove the fur circle from the surface.
• If the sticky circle loses its adhesion, replace it with a new one.
• Store fur circles in a clean, dry place to maintain their quality and reusability.

Troubleshooting

Issue: Wind noise or clothing rustle is still present.

• Solution 1: Ensure the fur circle is securely attached and fully covering the microphone capsule.
• Solution 2: Adjust the placement of the microphone and fur circle. Experiment with different positions under clothing to find the most effective spot for noise reduction.
• Solution 3: If using in extremely windy conditions, consider additional layers of clothing over the microphone for further protection.

Issue: Fur circle does not stick properly.

• Solution 1: Ensure the surface where the fur circle is being applied is clean and dry.
• Solution 2: Replace the used sticky circle with a new one. The adhesive may weaken after multiple uses or exposure to oils/dirt.

Support and Contact

For further assistance or inquiries, please visit the URSA Straps official website or contact their customer support.

Website: www.ursa-straps.com