Famidoc TENS/EMS/Massage Unit Instruction Manual

1. Introduction

The Famidoc TENS/EMS/Massage Unit is an advanced electronic pulse massager designed to provide drug-free pain relief, muscle conditioning, and relaxation. This 3-in-1 device combines Transcutaneous Electrical Nerve Stimulation (TENS), Electrical Muscle Stimulation (EMS), and Massage functions to address a wide range of physical discomforts and promote overall well-being.

Figure 1: The Famidoc unit highlighting its TENS, EMS, and Massage functions for pain relief, muscle conditioning, and body relaxation.

Understanding the Modes:

• TENS (Transcutaneous Electrical Nerve Stimulation): Delivers low-voltage pulses to stimulate nerve fibers, effectively blocking pain signals to the brain. Ideal for relieving acute and chronic pain in various body parts.
• EMS (Electrical Muscle Stimulation): Sends electrical impulses to muscles, causing them to contract and relax. Beneficial for strengthening muscles, preventing muscle atrophy, and promoting muscle regeneration after exercise or injury.
• Massage: Provides gentle electrical pulses that mimic traditional massage techniques. Helps to increase blood flow and circulation, alleviate fatigue, release pressure, and improve sleep quality.

2. Important Safety Information

Please read all instructions and safety warnings carefully before using this device. Failure to do so may result in injury or device malfunction.

General Precautions:

• Consult your physician before using this device, especially if you have pre-existing medical conditions.
• Do not use this device while driving, operating machinery, or during any activity where involuntary muscle contractions could put you at risk.
• Keep out of reach of children.
• Do not apply electrode pads over broken skin, open wounds, or areas with rashes.
• Avoid placing electrode pads on the head, face, neck (especially the carotid sinus), or across the chest, as this may interfere with heart rhythm.
• Do not use in wet environments, such as bathrooms or showers.

Contraindications:

• Do not use if you have a pacemaker, implanted defibrillator, or any other implanted metallic or electronic device.
• Do not use if you are pregnant or suspect you might be pregnant.
• Do not use if you have epilepsy, heart disease, or severe circulatory problems.
• Do not use on areas with cancerous lesions.

3. Package Contents

Your Famidoc TENS/EMS/Massage Unit package should include the following items:

• 1 x Famidoc Stimulator Unit
• 4 x 2" Square Electrode Pads
• 2 x Electrode Cables (dual lead)
• 1 x USB Charging Cable
• 1 x User Manual

4. Device Overview

Familiarize yourself with the main components and display of your Famidoc unit.

Figure 2: Front view of the Famidoc TENS/EMS/Massage Unit with electrode pads.

Figure 3: Labeled diagram of the Famidoc unit's display and controls, including treatment modes, programs, intensity, and timer.

5. Setup Guide

5.1 Charging the Device

The Famidoc unit has a built-in rechargeable battery. Before first use, fully charge the device. A full charge takes approximately 3 hours and provides up to 24 hours of continuous use.

• Connect the provided USB cable to the charging port on the device.
• Plug the other end of the USB cable into a wall charger, power bank, or laptop USB port.
• The battery level indicator on the screen will show charging status.

5.2 Connecting Electrodes

Proper connection of the electrode pads is essential for effective therapy.

Figure 4: Step-by-step guide for connecting pads, turning on, selecting modes, and adjusting intensity.

1. Connect the electrode pads to the lead wires. Ensure a secure connection.
2. Plug the lead wires into the A and/or B ports at the top of the Famidoc unit.
3. Ensure your skin is clean and dry before applying the pads.
4. Carefully peel the protective film from the electrode pads and firmly place them on the desired treatment area.

6. Operating Instructions

6.1 Turning On/Off

• To turn ON: Press the power button (usually on the side or top) for a short duration.
• To turn OFF: Press and hold the power button for 2-3 seconds, or the device will automatically turn off after 3 minutes of inactivity in standby mode.

6.2 Selecting a Mode (TENS, EMS, Massage)

The device offers three main therapy modes: TENS, EMS, and Massage. You can switch between these modes using the dedicated mode button (often labeled 'M' or indicated by an icon on the display).

• Press the mode selection button to cycle through TENS, EMS, and Massage modes.
• Once a main mode is selected, press the central button (often with a list icon) to enter the program selection for that mode.
• Use the arrow buttons to navigate and select one of the 36 preset programs (12 for TENS, 12 for EMS, 12 for Massage).

6.3 Adjusting Intensity

The Famidoc unit features 40 adjustable intensity levels. It is recommended to start with a low intensity and gradually increase it until you feel a comfortable, yet effective, sensation.

• Use the up/down arrow buttons associated with Channel 1 (CH1) to adjust the intensity for pads connected to Channel A.
• Use the up/down arrow buttons associated with Channel 2 (CH2) to adjust the intensity for pads connected to Channel B.

6.4 Setting the Timer

The device allows you to set a treatment duration between 15-30 minutes.

• While in standby mode, press and hold the central button (list icon) for 3 seconds until the timer display flashes.
• Use the up/down arrow buttons to adjust the time in 5-minute increments.
• Press the central button again to confirm the timer setting.

6.5 Using Dual Channels

The Famidoc unit has independent A/B dual channels, allowing you to apply different modes and intensities to two separate body areas simultaneously.

Figure 5: Illustration of independent A/B dual channel usage for different modes and intensities on separate body parts.

• Connect electrode cables to both Channel A and Channel B ports.
• You can select a mode and intensity for Channel A independently of Channel B.
• This allows for customized therapy, such as TENS on your back (Channel A) and Massage on your knee (Channel B) with different intensity levels.

6.6 Electrode Pad Placement

Proper placement of electrode pads is crucial for effective and safe therapy. Refer to the diagram below for common application areas. Always ensure pads are placed on clean, dry, and unbroken skin.

Figure 6: Visual guide for common electrode pad placement on various body parts for pain relief and muscle stimulation.

7. Maintenance and Care

7.1 Cleaning

• Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
• Clean electrode pads with a small amount of water and allow them to air dry. Do not use soap or harsh chemicals.

7.2 Storage

• Store the device and pads in a cool, dry place, away from direct sunlight and extreme temperatures.
• Place the electrode pads back on their protective film after each use to maintain their adhesive quality.

7.3 Replacing Electrode Pads

Electrode pads are consumable items and will lose their adhesiveness over time. Replace pads when they no longer stick firmly to the skin or when the sensation becomes uneven.

Figure 7: Comparison of original and upgraded pin-style electrodes, highlighting softer fabric for improved comfort and stability.

• Ensure the device is turned off before replacing pads.
• Gently peel off the old pads and dispose of them.
• Attach new, compatible electrode pads to the lead wires.

8. Troubleshooting

If you experience issues with your Famidoc unit, please refer to the common problems and solutions below:

9. Technical Specifications

10. Warranty and Customer Support

Famidoc products are manufactured with high standards of quality. For any questions regarding your device, troubleshooting assistance, or warranty information, please contact the seller or Famidoc customer support directly. Keep your purchase receipt as proof of purchase for warranty claims.