Patented Focus Adjustable LED Beam Floor Lamp Instruction Manual

Product Overview

The daylight24 Patented Focus Adjustable LED Beam Floor Lamp is designed to provide bright, natural daylight-quality illumination for various tasks such as reading, crafting, and hobbies. Its unique adjustable beam and flexible gooseneck allow for precise light positioning and intensity control, enhancing clarity and contrast without the yellow tint of incandescent lighting.

Safety Information

• Ensure the lamp is placed on a stable, level surface to prevent tipping.
• Do not expose the lamp to water or excessive moisture.
• Always unplug the lamp from the power outlet before cleaning or performing any maintenance.
• The LED bulb is integrated and not user-replaceable. Do not attempt to disassemble the lamp head.
• Keep the power cord away from heat sources, sharp edges, and heavy objects.
• This lamp is for indoor use only.

Package Contents

Please verify that all components are present before beginning assembly:

• Unassembled lamp parts (base, pole sections, gooseneck with lamp head)
• Integrated LED Bulb (pre-installed)
• AC Power Cord
• Instruction Manual (this document)

Setup and Assembly

Assembly of the Patented Focus Adjustable LED Beam Floor Lamp is straightforward. Follow these steps:

1. Carefully unpack all components from the packaging.
2. Place the heavy lamp base on a flat, stable surface.
3. Thread the lowest pole section into the lamp base, turning clockwise until secure. Ensure the power cord passes freely through the pole.
4. Continue to thread each subsequent pole section into the previous one, ensuring a tight connection.
5. Attach the gooseneck section with the lamp head to the top pole section, twisting until firmly connected.
6. Plug the AC power cord into a standard wall outlet.

Figure 1: Fully assembled Patented Focus Adjustable LED Beam Floor Lamp.

Operating Instructions

The Patented Focus Adjustable LED Beam Floor Lamp offers versatile lighting control:

• Power On/Off: Locate the toggle switch on the lamp pole, near the base of the gooseneck. Flip the switch to turn the lamp on or off.
• Adjusting the Gooseneck: The flexible 15.5-inch gooseneck allows you to direct the light beam precisely where needed. Gently bend the gooseneck to position the lamp head.
• Adjusting the Beam: The lamp features a unique pull shade mechanism to adjust the light beam.
  • To narrow the beam (e.g., for focused reading), gently pull the shade downwards. The beam can narrow from 33-inches down to 3-inches at a distance of 12-inches. As the beam narrows, the light intensity increases.
  • To broaden the beam (e.g., for general illumination), gently push the shade upwards.

Figure 2: Close-up view of the lamp head, showing the adjustable shade for beam control.

Figure 3: The lamp in use, demonstrating its utility for focused tasks like reading.

Maintenance

• Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe down the lamp's surfaces. Do not use abrasive cleaners or solvents, as they may damage the finish.
• LED Bulb: The 5-Watt high output LED bulb is integrated into the lamp head and is designed for long-term use (estimated 20 years life). It is not user-replaceable.

Troubleshooting

Specifications

Warranty and Support

The daylight24 Patented Focus Adjustable LED Beam Floor Lamp comes with a 3-year limited manufacturer warranty.

For warranty claims, technical support, or additional product information, please visit the official daylight24 store or contact their customer service directly.

Official Brand Store: daylight24 Amazon Store