Digipartspower 6ft UL AC Adapter Cable for Excelvan EHD11 Projector User Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your Digipartspower 6ft UL AC Adapter Cable. This power cord is designed to provide reliable power to various electronic devices, including the Excelvan EHD11 Projector, home theater systems, laptop computers, notebooks, game consoles, and printers.

The cable features a standard 3-prong U.S. design and is UL certified, ensuring safety and quality. It is equipped with multiple protection features including Over Current Protection (OCP), Over Voltage Protection (OVP), Over Temperature Protection (OTP), and Short Circuit Protection (SCP).

Digipartspower 6ft UL AC Adapter Cable showing both ends

Image 1.1: The Digipartspower 6ft UL AC Adapter Cable, displaying its 3-prong male plug and female IEC C13 connector.

2. Setup

Follow these steps to properly set up your AC adapter cable:

Inspect the Cable: Before use, visually inspect the entire length of the power cord for any signs of damage, cuts, or fraying. Do not use a damaged cable.
Identify Connections:
- The 3-prong male plug connects to a standard US wall outlet.
- The female IEC C13 connector plugs into your electronic device (e.g., projector, computer, monitor).
Connect to Device: Firmly insert the female IEC C13 connector into the corresponding power input port on your electronic device. Ensure a snug fit.
Connect to Power Outlet: Plug the 3-prong male plug into a standard, grounded 120V AC wall outlet. Ensure the outlet is easily accessible.
Power On Device: Once the cable is securely connected, you may power on your electronic device.

Close-up of UL certified 3-prong plug and IEC C13 connector

Image 2.1: Close-up view of the UL certified 3-prong plug and the IEC C13 connector, highlighting the robust construction.

3. Operating Instructions

The Digipartspower AC Adapter Cable functions as a direct power conduit for compatible electronic devices. No specific operational steps are required for the cable itself beyond proper connection.

Compatibility: This cable is compatible with devices requiring a 3-prong power cord, such as the Excelvan EHD11 Projector, various monitors, desktop computers, and other appliances.
Usage Environment: Use the cable in dry, indoor environments. Avoid exposure to moisture, extreme temperatures, or direct sunlight.
Unplugging: Always grasp the plug firmly when unplugging from the wall outlet or device. Do not pull the cable itself.

Power cable connected to various devices like a monitor, PC, kettle, and projector

Image 3.1: The power cable demonstrating its versatility by connecting to a monitor, desktop computer, electric kettle, and projector.

4. Maintenance

Proper maintenance ensures the longevity and safe operation of your power cable.

Cleaning: Disconnect the cable from all power sources before cleaning. Wipe the cable and plugs with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
Storage: When not in use, coil the cable loosely. Avoid tight coiling or kinking, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and heat sources.
Damage Inspection: Periodically inspect the cable for any signs of wear, cuts, or damage to the insulation or plugs. Replace the cable immediately if any damage is observed.

Coiled power cable with a diagram of the 3-prong plug

Image 4.1: The power cable neatly coiled, illustrating proper storage to prevent damage.

5. Troubleshooting

If you encounter issues with your power cable, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Device not receiving power.	Cable not fully plugged in. Wall outlet is not functioning. Cable is damaged. Device power switch is off.	Ensure both ends of the cable are securely connected. Test the wall outlet with another device. Inspect the cable for damage; replace if necessary. Verify the device's power switch is in the "on" position.
Cable feels warm during use.	Normal operation (slight warmth). Overload or faulty connection.	Slight warmth is normal. If excessively hot, unplug immediately. Check device power requirements and cable rating. Ensure connections are secure.

If troubleshooting steps do not resolve the issue, discontinue use and contact the manufacturer for further assistance.

6. Specifications

Brand: Digipartspower
Model: B09GLYM5RT
Cable Length: 6 feet (1.8 meters)
Plug Type: 3-prong U.S. standard plug
Connector Type: IEC C13 female connector
Certification: UL Certified, CE, FCC, ROHS
Safety Features: Over Current Protection (OCP), Over Voltage Protection (OVP), Over Temperature Protection (OTP), Short Circuit Protection (SCP)
Color: Black
Item Weight: Approximately 8 ounces

Diagram showing the internal structure of the power cable with copper wires and insulation

Image 6.1: Diagram illustrating the internal construction of the cable, highlighting its specific quality and wear-resistant properties for stable charging.

7. Warranty and Support

This Digipartspower product is manufactured to high-quality standards. For specific warranty information and support, please refer to the documentation provided with your purchase or contact Digipartspower directly.

Manufacturer: Digipartspower

For further assistance, please visit the official Digipartspower website or contact their customer service department.

Collage of people using devices with power cables in various settings: studying, traveling, gaming, and working

Image 7.1: The power cable is suitable for diverse applications, supporting devices used in study, travel, gaming, and work environments.

Digipartspower B09GLYM5RT