OEMIRY OM-WF01
OEMIRY OM-WF01 Stainless Steel Faucet Water Filter User Manual
Model: OM-WF01
Introduction
This manual provides instructions for the installation, operation, and maintenance of your OEMIRY OM-WF01 Stainless Steel Faucet Water Filter. This system is designed to provide filtered water directly from your tap, reducing common contaminants for improved water quality.
The OEMIRY faucet water filter utilizes advanced filtration technology to reduce up to 99% of chlorine, heavy metals (such as lead and mercury), chemical impurities, and sediment. It is constructed from food-grade 304 stainless steel, offering durability and a fingerprint-resistant finish.
Image: The OEMIRY OM-WF01 Faucet Water Filter illustrating the filtration process and the contaminants it reduces, including sediment, heavy metals (Hg, Cu, Pb), chlorine, taste & odor, and microorganisms. It is NSF/ANSI 42 certified.
Setup and Installation
The OEMIRY OM-WF01 faucet water filter is designed for easy installation without the need for drilling or electricity. It connects directly to your sink faucet. Please ensure your faucet is compatible before proceeding.
Compatibility Check:
- The system is compatible with standard faucets.
- It is not compatible with pull-type, hand-held, spray-type faucets, or faucets with sensors.
- Check your faucet connection type and size. Six universal adapters are included to fit most standard faucets.
Image: A diagram illustrating various faucet types (external spiral, internal spiral, threadless) and the corresponding adapters (A3, A4, A5, A6, B3, B4, C6) included with the OEMIRY OM-WF01 filter. It also shows examples of unsuitable faucet types such as spray-style, square/oval irregular, short downward length, and pull-out faucets.
Installation Steps:
- Prepare Faucet: Remove the existing aerator from your faucet.
- Select Adapter: Identify the correct adapter from the included kit that matches your faucet thread. If necessary, use the provided Teflon tape to ensure a tight seal.
- Attach Filter Unit: Screw the selected adapter onto your faucet. Then, attach the main filter unit to the adapter. Hand-tighten to prevent damage.
- Flush Filter: Before first use, turn on the cold water and let it run through the filter for approximately 5 minutes. This flushes out carbon dust and prepares the filter for use. Initial water may appear black due to carbon, which is normal and will clear.
Important Note:
The water filter does not reduce Total Dissolved Solids (TDS) values. It removes harmful substances while retaining beneficial minerals like calcium and magnesium, which contribute to TDS. If TDS reduction is your primary goal, a Reverse Osmosis (RO) system is recommended.
Operating Instructions
The OEMIRY OM-WF01 faucet water filter features a simple lever to switch between filtered and unfiltered water.
Using the Filter:
- Filtered Water: To dispense filtered water, push the lever on the side of the filter unit to the position indicated for filtered flow.
- Unfiltered Water: To dispense unfiltered water (e.g., for washing dishes), push the lever to the position indicated for unfiltered flow.
The filter provides a fast and stable flow rate of 0.5 GPM (gallons per minute), capable of filling an 8 oz cup in approximately 6 seconds.
Image: A person drinking clean, filtered water directly from a faucet equipped with the OEMIRY OM-WF01 filter, highlighting its use for drinking.
Image: A collage demonstrating the multi-usage of the OEMIRY OM-WF01 faucet water filter for various household needs, including providing water for pets, washing fruits and vegetables, skincare, and drinking water.
Official Product Video:
Video: An official product video from Beheal (Seller) demonstrating the features and benefits of the OEMIRY NSF/ANSI 42 Certified Stainless Steel Water Filter.
Maintenance
Regular maintenance ensures optimal performance and longevity of your OEMIRY OM-WF01 water filter.
Filter Replacement:
- The filter cartridge should be replaced every 3 months or after filtering approximately 350 gallons of water, whichever comes first.
- Filter life may vary based on local water quality and usage.
- To replace the filter, unscrew the bottom housing of the filter unit, remove the old cartridge, insert a new one, and reassemble. Ensure the waterproof sealing rubber ring is properly seated.
- Replacement cartridges can be found by searching for "B09SYKG2L5" on Amazon.
Image: An exploded view of the OEMIRY OM-WF01 faucet water filter, showing its components including the 304 food-grade stainless steel housing, the NSF/ANSI 42 certified filter cartridge, and the waterproof sealing rubber ring, illustrating how to access the filter for replacement.
Cleaning:
- Wipe the exterior of the stainless steel housing with a soft, damp cloth to keep it clean.
- Avoid using abrasive cleaners or solvents that could damage the finish.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage | Improperly installed adapter or O-ring, loose connections, damaged O-ring. | Ensure all connections are hand-tight. Check that the correct adapter is used and the O-ring is properly seated. Apply Teflon tape if necessary. Replace O-ring if damaged. |
| Slow Flow Rate | Clogged filter cartridge. | Replace the filter cartridge. Ensure the filter is not past its recommended lifespan. |
| Unpleasant Taste/Odor | Expired or saturated filter cartridge. | Replace the filter cartridge. |
| Water appears black initially | Carbon dust from new filter cartridge. | This is normal. Flush the filter with cold water for 5 minutes until the water runs clear. |
Specifications
| Feature | Detail |
|---|---|
| Brand | OEMIRY |
| Model Name | OM-WF01 |
| Product Dimensions (L x W x H) | 3.9" x 2.2" x 4.3" |
| Material | Food-Grade 304 Stainless Steel |
| Purification Method | Carbon Block |
| Filter Life Cycle | 3 months or 350 gallons |
| Maximum Flow Rate | 0.5 GPM (gallons per minute) |
| Operating Pressure Range | 15-100 psi |
| Temperature Range | 41 °F - 100 °F |
| Included Components | Faucet filter unit, 2 filter cartridges, installation kit, adapters, user manual |
Warranty Information
The OEMIRY OM-WF01 Faucet Water Filter comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, please refer to the documentation included with your product or contact OEMIRY customer support.
Customer Support
If you have any questions, require assistance with installation, or encounter any issues not covered in this manual, please contact OEMIRY customer support.
For compatibility concerns, it is recommended to take a photo of your faucet and send it to customer support for guidance.
Contact information can typically be found on the product packaging or the official OEMIRY website.
Related documentsOM-WF01
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.