ALLOSWELL 63" Console Table User Manual

1. Product Overview

The ALLOSWELL 63" Console Table (Model CTHR16001) is a versatile and sturdy furniture piece designed for entryways, hallways, living rooms, and bedrooms. Its industrial design, featuring a rustic brown engineered wood top and an alloy steel frame, offers both aesthetic appeal and practical functionality. This narrow sofa table is ideal for displaying decor, holding essentials, or serving as a convenient surface in various settings.

Figure 1: ALLOSWELL 63" Console Table. This image shows the assembled console table, featuring a long, narrow rustic brown tabletop supported by a black metal frame with four legs and a central support bar.

2. Important Safety Information

Please read and understand all instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Warning: This table requires assembly using a screwdriver. Ensure all screws are tightened securely before use.
• Do not exceed the maximum weight recommendation of 44 pounds (20 kg) on the tabletop to maintain stability and prevent damage.
• Always follow the assembly instructions precisely for safe and proper use.
• Keep small parts and packaging materials away from children and pets to prevent choking hazards.
• Place the table on a flat, stable surface to prevent tipping.
• Avoid placing hot items directly on the tabletop without protective coasters.

3. Components List

Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

Note: A screwdriver (not included) is required for assembly.

4. Setup and Assembly

Follow these steps carefully to assemble your ALLOSWELL Console Table. It is recommended to assemble the table with two people for ease and safety.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface (e.g., a blanket or cardboard) to prevent scratches. Verify all components listed in Section 3 are present.
2. Assemble Side Frames: Attach the two Long Side Frames (B) to the Crossbar (C) using the provided screws (E) and Hex Key (F). Ensure the holes align correctly and tighten screws firmly but do not overtighten.
3. Attach Central Support: Connect the Central Support Leg (D) to the assembled frame using the appropriate screws (E). This leg provides additional stability for the long tabletop.
4. Secure Tabletop: Carefully place the Tabletop (A) upside down on your soft surface. Align the assembled metal frame onto the pre-drilled holes on the underside of the tabletop.
5. Fasten Tabletop: Using a screwdriver (not included) and the remaining screws (E), securely attach the tabletop to the metal frame. Ensure all screws are fully tightened to prevent wobbling.
6. Final Check: Carefully turn the assembled table upright. Gently shake the table to ensure it is stable. If any wobbling occurs, re-check all screw connections and tighten as necessary.

5. Operating and Usage

Your ALLOSWELL Console Table is designed for various uses:

• Entryway Table: Ideal for keys, mail, decorative items, or a small lamp.
• Sofa Table: Place behind a sofa to hold drinks, books, or remote controls.
• Hallway Accent: Enhance narrow hallways with plants, photos, or art.
• Bedroom Console: Can serve as a narrow desk or display surface in a bedroom.

Always distribute weight evenly on the tabletop and adhere to the maximum weight capacity of 44 pounds (20 kg).

6. Maintenance and Care

To ensure the longevity and appearance of your console table, follow these maintenance guidelines:

• Cleaning: Wipe the tabletop and metal frame with a soft, damp cloth. Avoid harsh chemicals, abrasive cleaners, or excessive moisture, which can damage the finish.
• Spills: Clean up spills immediately to prevent staining, especially on the engineered wood surface.
• Heat Protection: Use coasters or placemats under hot items to protect the tabletop from heat damage.
• Sunlight Exposure: Avoid prolonged direct sunlight exposure, which can cause fading or discoloration of the wood finish.
• Regular Checks: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.

7. Troubleshooting

If you encounter any issues with your console table, refer to the following common problems and solutions:

Problem: The table is wobbly after assembly.

Solution: Ensure all screws connecting the frame components and the tabletop are fully tightened. Check that the table is placed on a level surface. If your floor is uneven, consider using furniture pads or shims under the legs to stabilize it.

Problem: Parts are missing or damaged upon arrival.

Solution: Do not proceed with assembly. Contact ALLOSWELL customer support immediately with your purchase details and a description of the missing/damaged parts. Refer to the contact information in Section 9.

Problem: The tabletop appears scratched or damaged.

Solution: For minor scratches, furniture repair markers or waxes designed for engineered wood can be used. For significant damage, contact customer support for advice or potential replacement options.

8. Specifications

9. Warranty and Support

ALLOSWELL stands behind the quality of its products. For specific warranty information regarding your ALLOSWELL 63" Console Table (Model CTHR16001), please refer to the warranty card included in your packaging or visit the official ALLOSWELL website.

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact ALLOSWELL customer support:

• Website: Visit ALLOSWELL on Amazon (for general inquiries and product information)
• Email: Refer to your purchase documentation or the ALLOSWELL website for direct customer service email.
• Phone: Refer to your purchase documentation or the ALLOSWELL website for customer service phone numbers.

When contacting support, please have your model number (CTHR16001 or CTHRHG) and purchase date readily available.