Bugucat Wall-Mounted or Adhesive Paper Towel Holder

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Bugucat Wall-Mounted or Adhesive Paper Towel Holder. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product.

A sleek, matte black paper towel holder, designed for under-cabinet or wall mounting.

Product Features

• High-Quality Construction: Made from durable SUS304 stainless steel with a matte black finish, featuring smooth, scratch-resistant, and waterproof edges.
• Strong Load Capacity: Designed to hold up to 3 kg, accommodating standard paper towel rolls up to 30 cm in length.
• Dual Installation Options: Offers both adhesive (no-drilling) and screw-mounting methods to suit various wall types and preferences.
• Space-Saving Design: Can be installed vertically or horizontally under kitchen cabinets or next to sinks, optimizing space, especially in smaller kitchens.
• Modern Aesthetic: Features a sleek, semi-open, and round design for easy roll replacement and tearing, enhancing your home's decor.
• Versatile Use: Suitable for holding paper towel rolls, cleaning cloths, food bags, plastic wrap, and more in various settings like kitchens, bathrooms, and utility rooms.

Package Contents

Please ensure all items are present in the package:

• 1 x Bugucat Paper Towel Holder
• 1 x Set of Screw Accessories (screws, anchors, caps)
• 1 x Adhesive Pad

An image detailing the dimensions of the paper towel holder (33.5cm total length, 30.5cm rod length, 14.5cm base length, 7.5cm height) and showing the included screw accessories (screws, anchors, caps) and adhesive pad.

This image highlights the product's construction from SUS304 Stainless Steel with a matte black finish, emphasizing strong welding and options for drilling installation.

Installation

Before installation, ensure the chosen surface is clean, dry, and free from dust or grease.

Method 1: Adhesive Installation (No Drilling)

1. Clean the Wall: Thoroughly clean and dry the desired installation surface.
2. Apply Adhesive: Peel off the protective film from the back of the adhesive pad.
3. Press Firmly: Press the holder firmly onto the marked location on the wall for several seconds.
4. Wait 24 Hours: Allow 24 hours for the adhesive to fully cure before placing a paper towel roll on the holder.

Suitable surfaces for adhesive installation: Metal wall, smooth wood, ceramic tile, glass, smooth marble.

Method 2: Drilling Installation

1. Mark Points: Mark the desired installation points on the wall using a pencil.
2. Drill Holes: Drill holes at the marked points using a 6 mm drill bit.
3. Insert Anchors: Insert the provided expansion anchors into the drilled holes.
4. Secure Holder: Align the holder with the anchors and screw it into place using the provided screws.
5. Cover Screws: Attach the decorative caps over the screw heads for a finished look.

Suitable surfaces for drilling installation: Painted wall, wallpaper, rough surface wall, lime wall, cement wall.

A visual guide showing both adhesive installation (clean wall, peel adhesive, press, wait 24 hours) and drilling installation (drill with 6mm bit, insert expansion screw, screw in, complete).

This image illustrates wall types suitable for adhesive installation (ceramic tile, marble, smooth glass, wood, smooth metal) and wall types requiring drilling (painted wall, wallpaper, rough surface, lime wall, cement wall).

The paper towel holder is shown installed horizontally under a kitchen cabinet, holding a roll of paper towels, demonstrating its space-saving utility in a kitchen setting.

Operating Instructions

1. Loading a Roll: To load a paper towel roll, simply slide it onto the holder rod.
2. Dispensing: Pull down on the paper towel and tear against the holder. The semi-open design facilitates easy tearing.

This image illustrates the adhesive installation method and shows the holder being used in various locations like the kitchen, bathroom, and bedroom for different items.

Maintenance

• Clean the holder regularly with a soft, damp cloth.
• Avoid using abrasive cleaners or harsh chemicals, as these may damage the finish.
• Ensure the holder remains dry after cleaning to prevent water spots.

Troubleshooting

• Holder not adhering properly (Adhesive Installation):
  • Ensure the wall surface was thoroughly cleaned and dry before application.
  • Verify the surface is smooth and non-porous (e.g., not painted, wallpapered, or rough).
  • Allow the full 24-hour curing time before loading the holder.
  • If issues persist, consider using the drilling installation method.
• Paper towel roll does not spin freely:
  • Check if the roll is correctly centered on the rod.
  • Ensure the roll is not too wide for the holder (maximum 30 cm).
• Holder feels loose (Drilling Installation):
  • Check if screws are tightened securely.
  • Ensure appropriate anchors were used for your wall type.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Bugucat customer service directly. A 30-day money-back guarantee is typically offered for this product.