1. Introduction
Thank you for choosing the Sunbeam Electric Heated King Blanket. This manual provides essential information for the safe and efficient use of your new heated blanket. Please read all instructions carefully before use and retain this manual for future reference.
This King-sized electric blanket features soft fleece material, 10 heat settings, and a 10-hour auto-off timer for your comfort and safety. It includes two controllers for individual temperature control on each side of the bed.
2. Important Safety Information
WARNING: To reduce the risk of burns, electric shock, fire, or injury, this product must be used in accordance with the following instructions:
- Do not use with infants, children, incapacitated persons, or anyone insensitive to heat.
- Do not use on an animal.
- Never use the blanket if the cord or plug is damaged.
- Do not use with pointed objects.
- Do not use if wet.
- Ensure the blanket is spread flat and not bunched or folded when in use.
- Do not tuck in the control unit or power cord.
- Always unplug the blanket when not in use.
- Do not dry clean this product. Dry cleaning solvents may damage the insulation of the heating element.
- Do not use pins or other metallic objects with this blanket. They may damage electrical wiring.
- Keep all controls away from drafts or open windows to prevent damage.
3. Package Contents
Your Sunbeam Electric Heated King Blanket package should contain the following items:
- 1 x Sunbeam Electric Heated King Blanket (Navy Blue, 100"L x 90"W)
- 2 x Detachable Controllers with Power Cords
- 1 x Instruction Manual
4. Setup Instructions
- Unpack the Blanket: Carefully remove the blanket and controllers from the packaging.
- Position the Blanket: Lay the heated blanket flat on your mattress. Ensure the connector for the controller is positioned at the foot of the bed. The blanket should not hang over the sides of the mattress.
- Connect the Controllers: For King-sized blankets, two controllers are provided. Connect each controller's cord securely into the blanket's connector. Ensure a firm connection.
- Plug into Power: Plug the power cords from the controllers into a 120V AC electrical outlet. Avoid using extension cords.
- Initial Warm-up: For best results, turn the blanket on to the highest setting for 15-30 minutes before bedtime to pre-warm your bed.
5. Operating Instructions
Your Sunbeam Electric Heated Blanket is designed for ease of use with its intuitive controller.
- Turning On/Off: Press the "On/Off" button located on the controller to activate or deactivate the blanket.
- Adjusting Heat Settings: Rotate the dial on the controller to select your desired heat level from 1 to 10. Setting 1 is the lowest heat, and 10 is the highest.
- Auto-Off Feature: The blanket is equipped with a 10-hour auto-off timer for safety and energy conservation. After 10 hours of continuous operation, the blanket will automatically turn off. To restart, simply turn the controller off and then back on.
- ThermoFine Technology: This blanket features ThermoFine technology, which automatically adjusts to maintain consistent heat throughout the night, adapting to room and body temperature changes.
6. Care and Maintenance
Proper care will ensure the longevity and performance of your Sunbeam Electric Heated Blanket.
Washing Instructions:
- Disconnect Power: Always ensure the blanket is unplugged from the wall outlet and the controllers are detached from the blanket before washing.
- Pre-soak (Optional): For best results, pre-soak the blanket for 15 minutes in mild soap and cold water.
- Machine Wash: Wash on the "delicate" or "gentle" cycle in a washing machine with cold water and a small amount of mild, non-sudsing detergent. Do not use bleach.
- Rinse: Rinse on the "normal" cycle with cold water.
- Tumble Dry: Tumble dry on low heat for 5-10 minutes. Remove while still damp and air dry over a clothesline or shower rod. Do not use commercial dryers or iron the blanket.
- Do Not Dry Clean: Dry cleaning solvents can damage the blanket's insulation.
Storage:
When not in use, store the blanket loosely folded in a cool, dry place. Avoid tightly folding or placing heavy objects on the blanket, as this can damage the internal wiring.
7. Troubleshooting Guide
If you experience issues with your heated blanket, please consult the following guide before contacting customer service.
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket does not heat. |
|
|
| Blanket heats unevenly or has cold spots. |
|
|
| Controller light flashes or displays an error code. |
|
|
8. Product Specifications
| Brand | Sunbeam (Newell Brands) |
| Model Name | Fleece (King Size) |
| Dimensions | 100"L x 90"W (King) |
| Material | 100% Fleece |
| Color | Navy Blue |
| Heat Settings | 10 |
| Auto-Off Timer | 10 Hours |
| Controllers | 2 (Dual Control for King Size) |
| Care Instructions | Machine Washable |
| UPC | 053891159470 |
9. Warranty and Customer Support
For warranty information or if you require assistance with your Sunbeam Electric Heated King Blanket, please contact Sunbeam Customer Service. Details regarding your product's warranty period and terms can typically be found on the product packaging or the official Sunbeam website.
Please have your model number (Fleece) and UPC (053891159470) available when contacting support.
Online Support: Visit the official Sunbeam website for FAQs and support resources.
Telephone Support: Refer to your product packaging or the Sunbeam website for current contact numbers.
