Ashley Harbour ASH32581A1 Lianna 5-Light Chandelier Instruction Manual

Important Safety Information

Please read and understand all instructions before beginning assembly and installation. Failure to do so could lead to fire, electric shock, or other injuries. Keep these instructions for future reference.

• WARNING: Risk of electric shock. Disconnect power at the main circuit breaker or fuse box before installation or servicing.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
• This fixture is intended for indoor use only.
• Ensure the mounting surface can support the weight of the fixture.
• Do not exceed the recommended wattage for bulbs.

Package Contents

Carefully unpack the fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the product.

• Chandelier Fixture (ASH32581A1)
• Mounting Hardware Kit
• Instruction Manual

Image: The Ashley Harbour Lianna 5-Light Chandelier in matte black, showcasing its full design with five candelabra-style light sockets.

Tools Required

The following tools are typically required for installation:

• Phillips Head Screwdriver
• Flat Head Screwdriver
• Wire Strippers
• Electrical Tape
• Ladder
• Safety Glasses

Setup and Installation

Follow these steps to safely install your chandelier. It is recommended to have two people for installation.

1. Turn off Power: Before starting, ensure the power to the junction box is turned off at the circuit breaker or fuse box.
2. Prepare Mounting Plate: Attach the mounting plate (part of the hardware kit) to the junction box in the ceiling using the provided screws. Ensure it is securely fastened.
3. Adjust Hanging Height: Determine the desired hanging height for your chandelier. The fixture is adjustable from 28 inches to 64 inches. Adjust the downrods accordingly.
4. Wire Connections: Carefully connect the electrical wires. Connect the fixture's black wire to the house's black (live) wire, the fixture's white wire to the house's white (neutral) wire, and the fixture's ground wire to the house's ground wire (or green ground screw on the mounting plate). Secure connections with wire nuts and electrical tape.
5. Mount Fixture: Carefully lift the chandelier and attach it to the mounting plate, securing it with the canopy screws. Ensure all wires are tucked neatly into the junction box.
6. Install Bulbs: Insert five (5) candelabra base B10 bulbs (not included) into the sockets. Do not exceed 60 watts per bulb.

Image: A technical diagram showing the dimensions of the ASH32581A1 chandelier, including a 5-inch diameter canopy, 27.5-inch fixture diameter, 25.25-inch fixture height, and an adjustable hanging height range of 28 to 64 inches.

Image: A close-up view of the chandelier's candelabra-style light sockets, ready for bulb installation.

Operating Instructions

Once installed and bulbs are in place, restore power at the circuit breaker. The chandelier is now ready for use. This fixture is designed to be dimmable when used with compatible dimmable bulbs and a dimmer switch (both sold separately).

• Bulb Type: Uses five (5) 60-watt maximum candelabra base (B10) bulbs. LED equivalent bulbs can also be used.
• Dimmable Functionality: For dimming capabilities, ensure you use dimmable bulbs and connect the fixture to a compatible dimmer switch.

Maintenance

Proper maintenance will ensure the longevity and appearance of your chandelier.

• Cleaning: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish.
• Bulb Replacement: Always turn off the power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching. Replace with the same type and wattage of bulb as specified.

Troubleshooting

If you experience issues with your chandelier, refer to the following common problems and solutions:

• Problem: Light does not turn on.
  Solution:
  1. Check that the power is turned on at the circuit breaker.
  2. Ensure the wall switch is in the 'ON' position.
  3. Verify that bulbs are correctly installed and not burnt out.
  4. Check wire connections for proper contact.
• Problem: Light flickers.
  Solution:
  1. Ensure bulbs are fully screwed into the sockets.
  2. If using a dimmer, ensure bulbs are dimmable and compatible with the dimmer switch.
  3. Check for loose wire connections.

If problems persist, consult a qualified electrician or contact customer support.

Specifications

Note: All dimensions are rounded up to the nearest 1/4 inch.

Warranty Information

This Ashley Harbour chandelier comes with a Limited 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or normal wear and tear. Please retain your proof of purchase for warranty claims.

Customer Support

If you have any questions regarding the installation, operation, or maintenance of your Ashley Harbour ASH32581A1 Lianna 5-Light Chandelier, or if you require assistance with troubleshooting, please contact the manufacturer's customer support. Refer to the product packaging or the Ashley Harbour website for specific contact information.