Sunbeam Electric Mattress Pad User Manual

Introduction and Product Overview

The Sunbeam Quilted Polyester Heated Mattress Pad is designed to provide warmth and relaxation, enhancing your sleep comfort. It features ThermoFine® technology for consistent heat control and offers 10 heat settings for personalized comfort. The pad also includes a convenient preheat setting and an auto-off feature for safety and energy efficiency. Made from 100% polyester, this mattress pad is machine washable for easy care.

• ThermoFine® Technology: Automatically adjusts for consistent heat.
• 10 Heat Settings: Customize your warmth level.
• Preheat Setting: Warms your bed before you get in.
• Auto-Off Feature: Enhances safety and conserves energy.
• Machine Washable: Easy to clean and maintain.
• Water Resistant Design: Provides protection and easy care.

Image showing the white quilted electric mattress pad laid flat, with the attached grey controller displaying a heat setting.

Important Safety Information

Please read all instructions carefully before using this electric mattress pad. Failure to follow these instructions may result in fire, electric shock, or injury.

• Potential Burn Hazard: Always follow instructions for proper use and handling.
• Keep away from children and flammable materials.
• Do not use with infants, persons insensitive to heat, or persons unable to remove the pad themselves.
• Do not use with a damaged cord or plug.
• Do not use with other heating devices.
• Do not dry clean. Dry cleaning solvents may damage the insulation.
• Do not use pins or other metallic objects with this product.

Setup Instructions

1. Unpack: Carefully remove the mattress pad and controller from the packaging.
2. Placement: Lay the mattress pad flat on your mattress with the connector end positioned at the foot of the bed. Ensure the pad is spread evenly and smoothly.
3. Secure: If your mattress pad has skirted edges, fit them around the mattress like a fitted sheet to secure the pad in place.
4. Connect Controller: Locate the connector on the mattress pad and firmly plug the controller cord into it. Ensure a secure connection.
5. Power Connection: Plug the power cord from the controller into a 120V AC electrical outlet. Do not use with extension cords or power strips.
6. Position Controller: Place the controller in a convenient location where it will not be covered or fall off the bed.

Operating Instructions

1. Turning On: Press the "On/Off" button on the controller. The display will illuminate, showing the current heat setting.
2. Adjusting Heat: Use the "+" and "-" buttons to cycle through the 10 available heat settings. Start with a lower setting and adjust as needed for your comfort.
3. Preheat Feature: To preheat your bed, press the "Preheat" button. The pad will warm up quickly to a comfortable temperature. After preheating, you can select your desired heat setting.
4. Auto-Off: For safety and energy conservation, the mattress pad is equipped with an automatic shut-off feature. The pad will turn off after a set number of hours (typically 10 hours, refer to specific model details if available).
5. Turning Off: Press the "On/Off" button again to turn off the mattress pad. The display will turn off. Unplug the unit from the wall outlet when not in use for extended periods.

Care and Maintenance

Proper care will ensure the longevity and performance of your Sunbeam Electric Mattress Pad.

Washing Instructions:

• Disconnect: Always disconnect the controller from the mattress pad and unplug the power cord from the wall outlet before washing.
• Pre-soak (Optional): For best results, pre-soak the mattress pad for 15 minutes in cold water with a mild detergent.
• Machine Wash: Wash on the "delicate" or "gentle" cycle in a washing machine with cold water and a small amount of mild detergent. Do not use bleach.
• Rinse: Rinse on the "normal" cycle with cold water.
• Machine Dry: Tumble dry on low heat or "delicate" cycle for 5-10 minutes. Remove while still damp and air dry completely over a clothesline or shower rod. Do not use commercial dryers.
• Do Not Iron: Do not iron the mattress pad.
• Do Not Dry Clean: Dry cleaning solvents may damage the wiring insulation.

Storage:

When not in use, store the mattress pad neatly folded in its original bag or a breathable storage container in a cool, dry place. Avoid placing heavy objects on top of the pad during storage.

Troubleshooting

Specifications

Warranty and Customer Support

Sunbeam products are manufactured to the highest quality standards. For information regarding your product's warranty, please refer to the warranty card included with your purchase or visit the official Sunbeam website.

If you have any questions, require assistance with setup, operation, or troubleshooting, please contact Sunbeam Customer Service. Contact details can typically be found on the product packaging or the official Sunbeam website.

Website: www.sunbeam.com