1. Introduction
This manual provides essential instructions for the installation, operation, and maintenance of your Fargroup JACANA 2 Rectangular Shower Tray. Please read this manual thoroughly before installation and retain it for future reference.
The JACANA 2 shower tray features soft, clean lines and a timeless style, designed to integrate easily into various bathroom designs. It is an extra-flat shower tray made from Bioplax material.
2. Safety Instructions
- Always ensure the installation area is clean, level, and structurally sound before beginning installation.
- Wear appropriate personal protective equipment (PPE) such as gloves and safety glasses during installation.
- Ensure all plumbing connections are watertight to prevent leaks.
- If you are unsure about any part of the installation process, consult a qualified professional.
- Do not use abrasive cleaners or harsh chemicals on the shower tray surface, as this may damage the material.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- Fargroup JACANA 2 Rectangular Shower Tray (100 x 80 x 5 cm)
- Drainage system (right-angle outlet)
- Note: Installation accessories such as sealant, leveling feet (if raising), and plumbing connections are typically sold separately.
4. Setup and Installation
The JACANA 2 shower tray offers flexible installation options: recessed, floor-mounted, or raised.
4.1 Preparation
- Inspect the Tray: Carefully unpackage the shower tray and inspect it for any damage.
- Prepare the Area: Ensure the floor where the tray will be installed is clean, dry, level, and capable of supporting the weight of the tray and a person.
- Plumbing: Verify that the drainage pipework is correctly positioned to align with the right-angle drain outlet of the shower tray.
4.2 Installation Steps
- Positioning: Carefully place the shower tray in its intended position. For recessed installation, ensure the recess is adequately prepared. For raised installation, attach appropriate leveling feet (not included) to the underside of the tray and adjust for level.
- Drain Connection: Connect the shower tray's right-angle drain outlet to your existing waste pipework. Use appropriate seals and plumbing compounds to ensure a watertight connection.
- Leveling: Use a spirit level to ensure the shower tray is perfectly level in all directions. Adjust as necessary.
- Sealing: Apply a high-quality silicone sealant around the perimeter of the shower tray where it meets the wall or floor, creating a waterproof barrier. Allow the sealant to cure completely as per manufacturer's instructions before use.
- Test: Once the sealant is cured, run water into the tray and check for any leaks around the drain and sealed edges.
Figure 1: Fargroup JACANA 2 Rectangular Shower Tray. This image shows the overall design and the position of the right-angle drain.
5. Operating Instructions
The Fargroup JACANA 2 shower tray is designed for efficient water drainage. Ensure the drain is clear of debris to maintain optimal performance.
- Water Flow: Direct shower water towards the drain area for effective removal.
- Drainage: The right-angle drain is designed to quickly remove water from the tray.
6. Maintenance
Regular cleaning and maintenance will prolong the life and appearance of your shower tray.
- Daily Cleaning: After each use, rinse the tray with clean water to remove soap residue and hair.
- Regular Cleaning: Clean the shower tray regularly with a soft cloth or sponge and a mild, non-abrasive bathroom cleaner.
- Avoid Harsh Chemicals: Do not use abrasive powders, scouring pads, or cleaners containing strong acids, alkalis, or solvents, as these can damage the Bioplax material and glossy finish.
- Drain Maintenance: Periodically remove the drain cover and clean any accumulated hair or debris to prevent blockages.
- Sealant Inspection: Regularly inspect the silicone sealant around the tray for any signs of wear, cracking, or mold. Re-seal if necessary to maintain waterproofing.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow drainage | Blocked drain or waste pipe. | Remove drain cover and clear any hair or debris. If blockage persists, check the waste pipe. |
| Water pooling in tray | Tray is not level. | Re-check the tray's level with a spirit level. If installed on leveling feet, adjust them. If floor-mounted, professional re-installation may be required. |
| Leaks around the tray perimeter | Damaged or insufficient sealant. | Remove old sealant, clean the area thoroughly, and re-apply a fresh bead of high-quality silicone sealant. |
8. Specifications
| Model | JACANA 2 (Model No. 225584) |
| Brand | Fargroup |
| Dimensions (L x W x H) | 100 x 80 x 5 cm |
| Weight | 13 Kilograms |
| Material | Bioplax (Acrylonitrile Butadiene Styrene - ABS reinforcement) |
| Color | White |
| Finish | Glossy |
| Drainage | Right-angle outlet |
| Installation Type | Recessed, Floor-mounted, or Raised (Autonome) |
| Assembly Required | Yes |
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact Fargroup customer service. Keep your proof of purchase for any warranty claims.
Note: Spare parts availability information is not provided in the product details.