Introduction
Thank you for choosing the STIGMA Professional Rotary Tattoo Machine Kit. This manual provides essential information for the safe and effective use of your new tattoo equipment. Please read these instructions thoroughly before operation to ensure proper setup, usage, and maintenance. This kit is designed for professional tattoo artists and serious enthusiasts.
Package Contents
Upon opening your STIGMA Tattoo Machine Kit, please verify that all the following components are present:
- STIGMA Rotary Tattoo Pen
- Digital Power Supply
- Foot Pedal
- 20 Sterile Tattoo Cartridge Needles (10 x 1003RL, 10 x 1201RL)
- 30 Ink Cups
- Tattoo Grip Tape
- Pair of Protective Gloves
- Aluminum Alloy Storage Box
Figure 1: An overview of all components included in the STIGMA Professional Rotary Tattoo Machine Kit, featuring the tattoo pen, digital power supply, foot pedal, cartridge needles, ink cups, gloves, and tattoo tape.
Product Features
- High-Quality Rotary Tattoo Pen: Lightweight, ergonomic, and designed for professional use, suitable for various tattooing styles.
- Professional Japanese Motor: Equipped with a high-speed coreless motor that ensures stable performance and prevents overheating during extended use.
- Versatile Performance: Optimized for precise line work and smooth gray shading, providing a high-quality tattooing experience with reduced skin trauma.
- Advanced Gear System: Features an advanced gear system for quiet and consistent operation.
- Digital Power Supply: Stable digital power supply with a clear display for easy voltage monitoring and adjustment (recommended operating voltage 9V-11V).
- Sterile Cartridge Needles: Includes 20 premium, CE certified, and EO Gas pre-sterilized cartridge needles for absolute safety and hygiene.
- Optimized Design: Unique internal design addresses common issues such as tired cutting lines, ink leakage, and incorrect line work.
- Compatibility: The tattoo pen is compatible with universal wireless power supplies.
Figure 2: This image displays the internal structure of the STIGMA rotary tattoo pen, highlighting the 8V motor, driver parts, and the aluminum alloy casing. This illustrates how the pen is assembled.
Setup Instructions
Follow these steps to set up your STIGMA Rotary Tattoo Machine Kit:
- Unpack Components: Carefully remove all items from the aluminum alloy storage box.
- Connect Power Supply: Plug the power cord into the digital power supply unit, then connect it to a suitable power outlet.
- Connect Foot Pedal: Insert the foot pedal cable into the designated port on the digital power supply.
- Connect Tattoo Pen: Connect the DC5.5 interface cable from the tattoo pen to the corresponding port on the digital power supply.
- Insert Cartridge Needle: Twist and push a sterile cartridge needle into the front end of the tattoo pen until it clicks securely into place. Ensure the needle is firmly seated.
- Adjust Needle Depth: Rotate the grip of the tattoo pen to adjust the needle protrusion (stroke) to your desired depth, typically between 0mm and 4.5mm.
- Apply Grip Tape (Optional): If desired, wrap the tattoo grip tape around the pen for enhanced comfort and grip.
Figure 3: A clear arrangement of the STIGMA tattoo kit's main components: the rotary tattoo pen, digital power supply, foot pedal, tattoo grip tape, and a blister pack of cartridge needles, illustrating a typical setup.
Operating Instructions
Once the kit is set up, follow these steps for operation:
- Power On: Turn on the digital power supply. The display will show the current voltage.
- Adjust Voltage: Use the voltage adjustment knobs on the power supply to set the desired operating voltage. The recommended range for the STIGMA rotary pen is 9V to 11V. Warning: Do not exceed 12V to protect the power supply and machine.
- Prepare Ink: Pour your chosen tattoo ink into the sterile ink cups.
- Activate Machine: Press the foot pedal to activate the tattoo machine. The needle will begin to move. Release the pedal to stop.
- Dip Needle: Gently dip the tip of the cartridge needle into the ink cup to load ink.
- Begin Tattooing: Carefully apply the needle to the prepared skin surface. Always practice on synthetic skin before working on human skin.
- Monitor Performance: Observe the machine's performance and adjust voltage or needle depth as needed for optimal results.
Figure 4: A gloved hand holds the STIGMA rotary tattoo pen, demonstrating its ergonomic design and readiness for operation. Sterile cartridge needles are visible, emphasizing the importance of hygiene.
Maintenance
Proper maintenance ensures the longevity and hygiene of your tattoo equipment:
- Cleaning: After each use, thoroughly clean the exterior of the tattoo pen and power supply with a suitable disinfectant wipe. Ensure no ink or bodily fluids remain.
- Needle Disposal: Always dispose of used cartridge needles in a designated sharps container immediately after use. Never reuse needles.
- Sterilization: While cartridge needles are pre-sterilized and disposable, ensure any reusable components that come into contact with skin or ink are properly sterilized according to industry standards.
- Storage: Store the tattoo machine and all components in the provided aluminum alloy box in a clean, dry, and dust-free environment when not in use.
- Lubrication: Periodically check the moving parts of the rotary pen for smooth operation. Consult a professional if lubrication is required, or refer to specific instructions for your pen model if available.
Troubleshooting
If you encounter issues with your STIGMA Tattoo Machine Kit, consider the following:
- Machine Not Turning On:
- Check all cable connections (power supply to outlet, foot pedal to power supply, pen to power supply).
- Ensure the power supply is switched on.
- Verify the power outlet is functional.
- Needle Not Moving/Weak Operation:
- Check the voltage setting on the digital power supply; increase if too low.
- Ensure the cartridge needle is correctly and securely inserted into the pen.
- Inspect the needle for any damage or bending. Replace if necessary.
- Confirm the foot pedal is fully depressed and functioning.
- Excessive Vibration or Noise:
- Verify the cartridge needle is properly seated.
- Check for any loose components on the tattoo pen.
- Ensure the operating voltage is within the recommended range (9V-11V).
- Ink Leakage:
- Ensure the cartridge needle is not damaged and is properly sealed.
- Avoid overfilling ink cups.
If these steps do not resolve the issue, please contact STIGMA customer support for further assistance.
Specifications
| Feature | Specification |
|---|---|
| Brand | STIGMA |
| Model Number | EM122KIT02BP142-1 |
| Model Color | Black |
| Tattoo Pen Type | Rotary Pen Machine |
| Motor Type | High-speed Coreless Motor |
| Operating Voltage | 9V - 11V (Max 12V) |
| Max Torque | 189.3 g.cm |
| Needle Stroke | 0mm - 4.5mm |
| Needle Length | 3mm |
| Interface | DC5.5 |
| Water Resistance | Not Waterproof |
| Package Dimensions | 26.2 x 26.1 x 14.3 cm |
| Package Weight | 1.68 kg |
Warranty and Support
The STIGMA Professional Rotary Tattoo Machine Kit comes with a one-year warranty. To ensure warranty validity and product longevity, please operate the machine under 12V. The product is CE certified, ensuring it meets European safety, health, and environmental protection requirements.
For any questions, technical support, or warranty claims, please contact STIGMA customer support. Our team is available to assist you with proper usage and any concerns you may have.
