BILLFARO Front Radiator Guard Installation Manual

1. Product Overview

The BILLFARO 4-piece black front outer and inner radiator guard set is designed to protect your Corvette C8's critical cooling components from road debris. Constructed from durable aluminum alloy with a honeycomb mesh pattern, these guards offer enhanced protection while maintaining optimal airflow.

1.1 Compatibility

This product is precisely engineered for:

• Corvette C8 Stingray Z51 Coupe (2020 and newer)
• Corvette C8 Convertible/HTC (2020 and newer)

Note: This product is NOT compatible with Corvette C8 Z06 and E-Ray models.

2. Safety Information

Please read and understand all safety instructions before installation to prevent injury or damage to your vehicle.

• Always wear appropriate personal protective equipment, such as gloves and eye protection, during installation.
• Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged.
• If lifting the vehicle, use appropriate jack stands and follow all safety procedures.
• Exercise caution when handling tools and components to avoid scratching vehicle paint or causing injury.
• Keep small parts and hardware away from children.

3. Package Contents

Verify that all components are present and undamaged before beginning installation.

• 4 x Black Front Radiator Guard Mesh Pieces (2 outer, 2 inner)
• Fixed Metal Brackets
• Bolts
• Nuts
• Spring Clips
• Auxiliary Adhesive Tape

4. Setup and Installation

4.1 Before You Begin

• Ensure the vehicle is clean and dry.
• Gather all necessary tools. A 7mm flex head ratchet wrench is highly recommended for tight areas.
• Locate the mounting points on the vehicle's bumper for the guards.
• Perform a test fit of the guards to ensure proper alignment and fitment before securing.

4.2 Step-by-Step Installation

The installation process involves removing the original inner grille trim, positioning the new guards, and securing them with the provided hardware. No cutting, drilling, or body modification is required.

1. Prepare the Vehicle: Safely lift the front end of your Corvette C8 using a jack and secure it with jack stands to provide adequate clearance for working underneath.
2. Remove Original Trim: Carefully remove the original inner grille trim from the front bumper. This typically involves removing several T15 bolts.
3. Position the Guards: Slide the BILLFARO radiator guards into place, aligning them with the factory front bumper lower side air intake openings. Ensure the contour matches perfectly.
4. Secure the Guards: Use the provided fixed metal brackets, bolts, nuts, spring clips, and auxiliary adhesive tape to firmly attach the guards. The stable mechanical fixing method prevents movement due to wind resistance or vibration. A 7mm flex head ratchet wrench will be particularly useful for tightening bolts in confined spaces.
5. Final Check: Once all guards are secured, double-check all connections to ensure they are tight and the guards are flush and gap-free. Lower the vehicle safely.

5. Product Functionality

The BILLFARO radiator guards serve as a robust barrier, preventing road debris, small stones, leaves, and other foreign objects from entering and damaging the vehicle's radiators, condensers, and brake cooling ducts. This protection helps maintain optimal heat dissipation efficiency, reduces the risk of costly cooling system repairs, and extends the lifespan of front-end mechanical components.

6. Care and Cleaning

The powder-coated aluminum surface of the radiator guards is designed for easy maintenance.

• Regularly inspect the guards for any accumulated debris and remove it.
• To clean, simply rinse with water or wipe with a damp cloth to remove dust and dirt.
• Avoid using harsh chemicals or abrasive cleaners that could damage the powder coating.

7. Troubleshooting

If you encounter issues during installation or use, refer to the following common solutions:

• Difficulty with Fitment: Ensure the guards are correctly oriented (left/right, outer/inner) and that all original trim pieces have been fully removed. Re-check the compatibility with your specific Corvette C8 model.
• Loose Guards: Verify that all bolts, nuts, and clips are securely tightened. The auxiliary adhesive tape should also be properly applied to help hold the guards in place during fastening.
• Scratches During Installation: The guards feature polished edges to minimize this risk. However, always handle with care and consider placing protective tape on adjacent painted surfaces if working in tight areas.
• Obstructed Airflow: The design is intended to not block original airflow. If you suspect airflow issues, ensure the guards are installed flush and not bent or deformed.

8. Product Specifications

9. Warranty and Support

9.1 Warranty Information

This BILLFARO product comes with a Lifetime Manufacturer Warranty. Please retain your proof of purchase for any warranty claims.

9.2 Customer Support

For technical assistance, installation questions, or warranty inquiries, please contact BILLFARO customer support through the retailer where the product was purchased or refer to the official BILLFARO website for contact details.