Orient Symphony IV Automatic Watch RA-AC0F08G10B Instruction Manual

1. Introduction

Thank you for choosing the Orient Symphony IV Automatic Watch. This timepiece combines classic design with reliable Japanese automatic movement, offering both elegance and precision. This manual provides essential information for the proper setup, operation, and maintenance of your watch.

Figure 1: Front view of the Orient Symphony IV Automatic Watch with champagne dial.

2. Key Features

• Movement: Powered by the Orient F6722 In-House Japanese Automatic / Hand Winding Movement.
• Water Resistance: 50 meters (164 feet), suitable for everyday life such as washing hands and showering.
• Case Diameter: 41.6 mm (without crown).
• Crystal: Scratch Resistant Sapphire Crystal.
• Case Material: Stainless Steel.
• Bracelet: Stainless Steel with a double locking foldover clasp.

3. Setup

3.1 Unboxing

Your Orient Symphony IV watch comes securely packaged in a protective box. Carefully remove the watch and any accompanying documentation.

Figure 2: The watch is presented in a black Orient branded box.

3.2 Setting Time and Date

1. Unscrew the Crown (if applicable): Some models feature a screw-down crown for enhanced water resistance. If your crown is screw-down, gently unscrew it counter-clockwise until it pops out to position 1.
2. Pull the Crown to Position 2 (Date Setting): Gently pull the crown out one more click to position 2. Turn the crown clockwise or counter-clockwise to set the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
3. Pull the Crown to Position 3 (Time Setting): Pull the crown out to its outermost position (position 3). The second hand will stop. Turn the crown to set the hour and minute hands. To ensure accurate time, set the time a few minutes ahead and then push the crown back to position 1 when a time signal (e.g., from a radio or phone) reaches the desired time.
4. Push and Screw Down the Crown: Once the time and date are set, push the crown back into position 1. If it's a screw-down crown, gently push it in and screw it clockwise until it is tight against the case to maintain water resistance.

3.3 Winding the Watch

Your Orient Symphony IV watch features an automatic movement with hand-winding capability.

• Automatic Winding: The watch is automatically wound by the motion of your wrist while wearing it. For optimal performance, wear the watch daily for at least 8-10 hours.
• Hand Winding: If the watch has stopped or has not been worn for a period, you can hand-wind it. With the crown in position 1 (pushed in), turn the crown clockwise approximately 30-40 times. This will provide sufficient power reserve to start the watch and allow the automatic winding mechanism to take over.

4. Operating Instructions

4.1 Wearing the Watch

Ensure the watch is worn comfortably on your wrist, not too tight or too loose. The automatic movement relies on your arm's motion to keep it wound.

Figure 3: The watch displayed on a wrist, demonstrating how it looks when worn.

4.2 Water Resistance

Your watch is water resistant to 50 meters (5 ATM). This rating means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water, such as showering. It is not suitable for swimming, diving, or prolonged water activities. Always ensure the crown is fully pushed in and, if applicable, screwed down, before any contact with water.

Figure 4: Rear view of the watch, showcasing the automatic movement and engraved water resistance rating.

5. Maintenance

5.1 Cleaning

Wipe the watch case and bracelet regularly with a soft, dry cloth to remove dust and fingerprints. For stubborn dirt, a slightly damp cloth can be used, ensuring the crown is fully closed. Avoid using harsh chemicals or abrasive materials.

5.2 Avoiding Magnetic Fields

Automatic watches can be affected by strong magnetic fields, which may cause them to run inaccurately. Keep your watch away from strong magnets, such as those found in speakers, refrigerators, and certain electronic devices.

5.3 Regular Servicing

Like any precision mechanical instrument, your watch benefits from periodic servicing. It is recommended to have your watch inspected and serviced by an authorized watchmaker every 3-5 years to ensure its longevity and accuracy.

6. Troubleshooting

• Watch Not Running: If the watch has stopped, try hand-winding it approximately 30-40 times (crown in position 1, turn clockwise). If it still does not start, ensure the crown is fully pushed in. If the issue persists, it may require professional inspection.
• Inaccurate Time: Minor variations in accuracy are normal for mechanical watches. If your watch is consistently running significantly fast or slow, it might be magnetized or require regulation by a professional watchmaker.
• Condensation Inside Crystal: If you notice condensation under the sapphire crystal, this indicates moisture has entered the watch. Immediately take the watch to an authorized service center to prevent further damage to the movement.

7. Specifications

8. Warranty and Support

8.1 Warranty Information

Your Orient Symphony IV watch comes with a limited warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration of coverage. The warranty typically covers manufacturing defects but does not cover damage resulting from improper use, accidents, or unauthorized repairs.

8.2 Customer Support

For any questions, service requests, or technical assistance, please contact Orient customer support or an authorized service center. Contact information can usually be found on the official Orient website or in your warranty documentation.

You can also visit the official Orient Store on Amazon for more information: Orient Store