Artraise Filter Replacement Instruction Manual

1. Introduction

This manual provides essential instructions for the installation, maintenance, and replacement of Artraise filters designed for compatible Tineco cordless vacuum cleaners. Adhering to these guidelines will help ensure optimal performance and longevity of your vacuum cleaner.

Image: Three Artraise replacement filters, ready for use.

2. Compatibility

These Artraise replacement filters are compatible with the following Tineco cordless vacuum cleaner models:

• Tineco A10 Hero
• Tineco A11 Hero
• Tineco A10/A11 Master
• Tineco A10 Dash
• Tineco PURE ONE S11 Series
• Tineco PURE ONE S12 Series
• Tineco PURE ONE X Series

Please verify your vacuum cleaner's model number to ensure proper fit.

Image: Artraise filters displayed alongside compatible Tineco vacuum cleaner models.

3. Package Contents

Each package contains:

• 3 x Artraise Pre-Filters

4. Installation Guide

Follow these steps to replace the filter in your Tineco cordless vacuum cleaner:

1. Power Off: Ensure your vacuum cleaner is turned off and unplugged from any charging source.
2. Locate Filter Compartment: Identify the filter compartment on your Tineco vacuum. This is typically located near the dustbin.
3. Remove Old Filter: Gently twist or pull the old filter to remove it from its housing. Dispose of the old filter responsibly.
4. Insert New Filter: Take a new Artraise filter and align it with the filter compartment. Push or twist it firmly until it clicks into place, ensuring a secure fit.
5. Close Compartment: Close the filter compartment cover securely.

For a visual demonstration, please refer to the installation videos below.

5. Maintenance and Care

To maintain the effectiveness of your Artraise filters:

• Washing: The filters are washable and reusable. Simply rinse them under clean, running water.
• Drying: Allow the filters to air dry completely for at least 24 hours before reinserting them into the vacuum cleaner. Ensure they are thoroughly dry to prevent mold or damage to the vacuum.
• Frequency: It is recommended to wash the filter every 2-3 weeks, depending on usage.

Image: An Artraise filter being washed under running water, highlighting its reusable design.

6. Replacement Schedule

For optimal vacuum performance and suction power, it is recommended to replace the filters every 3-6 months. Regular replacement ensures the H13 efficiency of the filters in trapping particles as small as 0.3 microns.

7. Product Features

Artraise filters are designed with advanced features to enhance your cleaning experience:

• High Efficiency Filtration: Equipped with H13 efficiency material, these filters trap 99.97% of particles as small as 0.3 microns, including dust, pet dander, and allergens.
• Motor Protection: Effective filtration extends the life of your vacuum's motor by preventing fine dust and debris from entering and damaging internal components.
• Durable Construction: Made from high-quality plastic and fabric materials for long-lasting performance.

Image: An Artraise filter demonstrating high-efficiency filtration, protecting the vacuum motor.

8. Specifications

9. Support

For any questions or assistance regarding your Artraise filter replacements, please refer to the seller's contact information on the platform where the purchase was made. For general information about Tineco vacuums, please visit the official Tineco website.