ONKYO OCP-01(B) Bluetooth Record Player Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your ONKYO OCP-01(B) Bluetooth Record Player. Please read this manual thoroughly before using the product and retain it for future reference.

2. Safety Information

To ensure safe operation, always follow these basic precautions:

• Read all instructions before use.
• Keep the product away from water or moisture.
• Do not place the product near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Use only attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Place the unit on a flat, stable surface to prevent vibrations and ensure proper playback.

3. Package Contents

Verify that all items listed below are included in your package:

• ONKYO OCP-01(B) Bluetooth Record Player Unit
• AC Adapter
• 45 RPM Adapter
• Dust Cover (removable with hinges)

4. Product Overview

The ONKYO OCP-01(B) is a compact, portable record player with built-in stereo speakers and Bluetooth connectivity. Its retro design makes it a stylish accent for any interior.

Figure 4.1: ONKYO OCP-01(B) Bluetooth Record Player with lid open.

Figure 4.2: Top view of the ONKYO OCP-01(B) record player with the lid open, showing the turntable and tonearm.

Figure 4.3: Close-up of the tonearm and stylus on the record player.

Figure 4.4: Side view of the ONKYO OCP-01(B) record player, highlighting the built-in speakers.

Figure 4.5: Rear view of the ONKYO OCP-01(B) record player, showing the RCA analog output and power input.

5. Setup

5.1 Unpacking and Initial Placement

Carefully remove all components from the packaging. Place the record player on a stable, level surface to ensure optimal performance and prevent skipping during playback.

5.2 Power Connection

Connect the provided AC adapter to the DC input port on the back of the record player, then plug the adapter into a wall outlet.

5.3 Dust Cover Installation

Insert the hinges of the dust cover into the hinge holders on the main unit. The dust cover protects the turntable from dust when not in use.

5.4 Stylus Protection

Gently remove the clear plastic stylus protector from the needle before playing a record. Be careful not to damage the stylus.

Figure 5.1: Gently placing the stylus onto a record.

6. Operating Instructions

6.1 Playing a Record

1. Place a record on the turntable platter.
2. Select the appropriate speed (33 1/3, 45, or 78 RPM) using the speed selector switch. Use the 45 RPM adapter for 7-inch records.
3. Release the tonearm lock.
4. Lift the tonearm using the tonearm lift lever.
5. Manually position the tonearm over the desired track of the record.
6. Gently lower the tonearm using the tonearm lift lever. The stylus will slowly descend onto the record, and playback will begin.
7. At the end of the record, the auto-stop function (if enabled) will stop the platter rotation. Manually return the tonearm to its rest and secure the tonearm lock.

Figure 6.1: Record sizes and corresponding playback speeds.

6.2 Bluetooth Connectivity

The OCP-01(B) features Bluetooth for wireless audio streaming. To connect to a Bluetooth device:

1. Turn on the record player.
2. Activate Bluetooth pairing mode on your external Bluetooth speaker or headphones.
3. The record player will automatically search for nearby Bluetooth devices. Once paired, the Bluetooth indicator light will become solid.

6.3 Pitch Control

Use the pitch control knob to fine-tune the playback speed of your records. Rotate the knob clockwise to increase speed or counter-clockwise to decrease it.

6.4 Headphone Output

Connect headphones to the 3.5mm headphone jack for private listening.

6.5 RCA Analog Output

Use the RCA analog output jacks to connect the record player to an external amplifier or powered speakers for enhanced audio experience.

7. Maintenance

7.1 Cleaning the Stylus

Regularly clean the stylus using a soft brush designed for record player needles. Brush gently from back to front to remove dust and debris.

7.2 Cleaning Records

Use a dedicated record cleaning brush or cloth to remove dust from your records before each play. This helps maintain sound quality and prolong stylus life.

8. Troubleshooting

8.1 Sound Skipping or Distortion

• Ensure the record player is on a stable, level surface.
• Check the record for dust, scratches, or warping. Clean the record if necessary.
• Inspect the stylus for damage or wear. A worn stylus can cause skipping and should be replaced.

8.2 Incorrect Playback Speed

• Verify that the speed selector switch is set to the correct RPM for your record (33 1/3, 45, or 78 RPM).
• Adjust the pitch control knob to fine-tune the speed if slight variations are observed.

8.3 No Sound

• Ensure the power is on and the volume knob is turned up.
• If using external speakers via RCA output, check all cable connections and ensure the external amplifier/speakers are powered on and set to the correct input.
• If using Bluetooth, ensure the record player is successfully paired with your Bluetooth device (blue LED solid) and the external device's volume is up.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official ONKYO website. Keep your proof of purchase for any warranty claims.