ORIDECOR Wireless Wearable Bluetooth Speaker Watch User Manual

Introduction

This manual provides essential information for the safe and effective operation of your ORIDECOR Wireless Wearable Waterproof Wrist Portable Bluetooth Speaker Watch. Please read this manual thoroughly before using the product and retain it for future reference.

The ORIDECOR Wireless Wearable Bluetooth Speaker Watch in blue, showcasing its compact and portable design.

Product Features

• Bluetooth V5.0 + EDR: Ensures stable and efficient wireless connectivity.
• Multi-Function Design: Operates as a Bluetooth speaker, MP3 player, FM radio, and supports hands-free calls and selfie function.
• Waterproof Design: Resistant to gentle water spray and splash, suitable for outdoor activities. Note: Not designed for partial or full submersion.
• TWS (True Wireless Stereo) Support: Connect two speaker watches for a stereo audio experience.
• Colorful LED Lights: Features 8 distinct light patterns for enhanced visual appeal. Note: Two holes on the right side are not illuminated as they house the charging port.
• Anti-lost Alarm: Alerts the user if the speaker disconnects beyond the effective Bluetooth range.

Visual representation of the speaker watch's key functionalities, including Bluetooth connectivity, hands-free calling, FM radio, MP3 playback via Micro SD card, high-capacity battery, selfie function, 8-pattern colorful lights, and anti-lost alarm.

Setup Guide

Charging the Device

1. Locate the charging port on the side of the speaker watch.
2. Connect the provided USB charging cable to the speaker watch and a compatible DC5V/500mA power source.
3. The charging indicator light will illuminate.
4. Charge the device for approximately 2 hours for a full charge. It is recommended to charge for over 2 hours before the first use.
5. The indicator light will change or turn off once charging is complete.

Powering On/Off

• To power on, press and hold the Power button until the indicator lights illuminate and an audible prompt is heard.
• To power off, press and hold the Power button until the indicator lights turn off and an audible prompt is heard.

Operating Instructions

Bluetooth Pairing

1. Ensure the speaker watch is powered on and in Bluetooth pairing mode (indicated by a flashing blue light or audible prompt).
2. On your smartphone or tablet, enable Bluetooth and search for available devices.
3. Select "ORIDECOR Speaker" (or similar name) from the list of devices.
4. Once connected, the speaker will provide an audible confirmation, and the indicator light will become solid.

Music Playback (Bluetooth/MP3)

• Bluetooth Mode: After successful pairing, play music from your connected device. Use the speaker's buttons for volume control (+ / -) and track navigation (long press + for next, long press - for previous).
• MP3 Player Mode: Insert a Micro SD card with MP3 files into the designated slot. The speaker will automatically switch to MP3 mode and begin playback. Use the same buttons for volume and track control.

FM Radio Function

1. Switch to FM Radio mode (usually by pressing the Mode button).
2. Press the Play/Pause button to automatically search and save available radio stations.
3. Use the + / - buttons to navigate between saved stations.

Hands-Free Calling

• When a call comes in while connected via Bluetooth, press the Play/Pause button to answer.
• Press the Play/Pause button again to end the call.
• To reject a call, press and hold the Play/Pause button.

Selfie Function

• Ensure the speaker watch is connected to your smartphone via Bluetooth.
• Open your phone's camera application.
• Press the Selfie button on the speaker watch to remotely trigger your phone's camera shutter.

TWS (True Wireless Stereo) Pairing

1. Ensure both ORIDECOR speaker watches are powered off.
2. Power on both speaker watches simultaneously. They will automatically attempt to pair with each other.
3. Once paired, one speaker will act as the master and the other as the slave, providing stereo sound.
4. Connect your device to the master speaker via Bluetooth as described in the "Bluetooth Pairing" section.

The ORIDECOR Wireless Speaker Watch is designed to withstand splashes, making it suitable for various environments.

The speaker watch is designed for comfortable wear during outdoor activities, providing portable audio.

The integrated colorful LED lights enhance visibility and style, especially during evening activities.

The ORIDECOR Speaker Watch is versatile for use in diverse settings, from outdoor adventures to social gatherings, and makes an ideal gift.

Maintenance and Care

• Clean the speaker watch with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Do not expose the device to extreme temperatures (hot or cold) or direct sunlight for prolonged periods.
• Store the device in a cool, dry place when not in use.
• Ensure the charging port cover is securely closed to maintain water resistance.
• Avoid dropping or subjecting the device to strong impacts.

Troubleshooting

Specifications

Warranty and Support

ORIDECOR guarantees all products with a 1 YEAR LIMITED WARRANTY from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use.

For warranty claims, technical support, or any concerns regarding your product, please contact ORIDECOR customer service through the retailer where the product was purchased or visit the official ORIDECOR website for contact information.

Please retain your proof of purchase for warranty validation.