LEMBERI Charles Pink Gaming Chair Instruction Manual

1. Important Safety Information

Please read all safety instructions carefully before assembling and using your LEMBERI Charles Pink Gaming Chair. Retain this manual for future reference.

• Weight Capacity: Do not exceed the maximum weight capacity of 400 pounds (181 kg). Exceeding this limit may cause damage to the chair and potential injury.
• Assembly: Ensure all components are securely assembled according to the provided instructions. Improper assembly can lead to instability and hazards.
• Gas Lift: Handle the gas lift with care. Do not disassemble or heat the gas lift cylinder.
• Reclining: Follow proper instructions when adjusting the reclining positions to prevent tipping. Ensure the chair is stable before fully reclining.
• Footrest: Extend and retract the footrest smoothly. Avoid placing excessive weight on the extended footrest.
• Children: Keep children away from moving parts during adjustment. Adult supervision is recommended when children use the chair.

2. Package Contents

Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer service.

• Backrest
• Seat Cushion
• Armrests (2)
• Five-Star Base
• Casters (5)
• Gas Lift Cylinder
• Gas Lift Cover
• Mechanism Plate
• Headrest Pillow
• Lumbar Support Pillow (with massage function)
• Footrest Assembly
• Hardware Kit (screws, washers, Allen wrench)

3. Setup Instructions

Follow these steps to assemble your LEMBERI Charles Pink Gaming Chair. It is recommended to have a second person assist with certain steps.

1. Assemble the Base: Insert the five casters into the holes at the end of each leg of the five-star base. Ensure they are firmly seated.
2. Install Gas Lift: Place the gas lift cylinder into the center hole of the five-star base. Cover it with the gas lift cover.
3. Attach Mechanism Plate: Secure the mechanism plate to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
4. Attach Armrests: Fasten the armrests to the sides of the seat cushion using the designated screws.
5. Connect Seat to Base: Carefully place the assembled seat cushion onto the gas lift cylinder.
6. Attach Backrest: Align the backrest with the seat cushion and secure it using the remaining screws.
7. Install Footrest: Slide the footrest assembly into the designated slots under the seat.
8. Attach Pillows: Secure the headrest pillow to the top of the backrest and the lumbar support pillow to the lower back area using their elastic straps.

Image: Product dimensions for the LEMBERI Charles Pink Gaming Chair.

Image: Detailed view of the footrest, industrial-grade Class 4 gas lift, and high load-bearing five-star base.

4. Operating Instructions

Your LEMBERI Charles Pink Gaming Chair offers multiple adjustment options for personalized comfort.

• Seat Height Adjustment: Use the lever located under the seat on the right side to adjust the seat height. Pull the lever up while seated to lower, or pull up while standing to raise. The seat height can be adjusted between 13.4 to 17.3 inches.
• Backrest Recline: Use the lever on the left side of the seat to recline the backrest. The backrest can be adjusted from 90 degrees (upright) to 155 degrees (nearly flat). Lean back to your desired angle and release the lever to lock.
• Footrest Operation: To extend the footrest, pull it out from under the seat. To retract, push it back in until it is fully stored.
• Lumbar Massage Function: The lumbar support pillow features a massage function. Connect the USB cable from the pillow to a USB power source (e.g., computer, power bank) to activate the vibration.
• 360-Degree Swivel: The chair is equipped with omni-directional wheels and a 360-degree swivel function for easy movement and rotation.

Image: Adjustable backrest angles and seat height range.

Image: Ergonomic design of the chair, providing neck and lumbar support.

5. Maintenance

Proper care will extend the life and appearance of your gaming chair.

• Cleaning: Wipe clean with a damp cloth. For faux leather, use a mild soap solution if necessary, then wipe dry. Avoid harsh chemicals or abrasive cleaners.
• Inspection: Periodically check all screws and bolts to ensure they are tight. Retighten as needed.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack.
• Spills: Clean spills immediately to prevent staining.

6. Troubleshooting

If you encounter any issues with your LEMBERI Charles Pink Gaming Chair, refer to the following common solutions:

• Chair is Wobbly: Ensure all screws and bolts are securely tightened. Check that the casters are fully inserted into the base.
• Gas Lift Not Functioning: Verify that the gas lift lever is correctly engaged. If the issue persists, the gas lift cylinder may need replacement.
• Recline Mechanism Stuck: Check for any obstructions around the recline lever or mechanism. Ensure the lever is fully pulled or pushed to engage/disengage.
• Footrest Not Extending/Retracting Smoothly: Inspect the footrest rails for any debris or damage. Apply a silicone-based lubricant if necessary.
• Lumbar Massage Not Working: Ensure the USB cable is securely connected to a working USB power source. Try a different USB port or power adapter.

If you cannot resolve the issue, please contact LEMBERI customer service for further assistance.

7. Specifications

8. Warranty and Support

LEMBERI is committed to providing high-quality products and excellent customer service.

• Customer Service: Our dedicated customer support team is available to assist you with any questions, concerns, or issues you may have. We aim to respond to all inquiries within 24 hours.
• Contact Information: For support, please refer to the contact details provided on your purchase receipt or the LEMBERI official website.
• Warranty: Please retain your proof of purchase for any warranty claims. Specific warranty terms and conditions may apply and are detailed on the product packaging or LEMBERI's official channels.