DAVIKERY 3D Butterfly Wall Stickers Instruction Manual

Introduction

Thank you for choosing DAVIKERY 3D Butterfly Wall Stickers. These decorative decals are designed to enhance the aesthetic of your living space, offering a vibrant and dynamic touch to walls in bedrooms, living rooms, nurseries, or any area requiring a creative accent. This manual provides essential information for the proper setup, application, and maintenance of your wall stickers.

Package Contents

• One (1) set of DAVIKERY 3D Butterfly Wall Stickers (multiple pieces)

Setup and Surface Preparation

Proper surface preparation is crucial for optimal adhesion and longevity of the wall stickers.

1. Clean the Surface: Ensure the wall surface is clean, dry, and smooth. Remove any dust, dirt, grease, or moisture. For freshly painted walls, allow at least 2-3 weeks for the paint to fully cure before applying the stickers.
2. Inspect Stickers: Carefully unpackage the butterfly stickers and inspect them for any damage.
3. Plan Placement: Before removing the adhesive backing, arrange the butterflies on the floor or hold them against the wall to visualize your desired layout. This helps prevent repositioning, which can reduce adhesion.

Image: A collection of DAVIKERY 3D butterfly wall stickers in various colors and sizes, ready for application.

Application Instructions

Follow these steps for applying the 3D butterfly wall stickers:

1. Peel Backing: Gently peel the protective paper backing from the adhesive side of each butterfly sticker. Avoid touching the adhesive surface with your fingers.
2. Position and Press: Carefully position the butterfly on the prepared wall surface according to your planned layout. Once in place, press firmly from the center outwards to smooth out any air bubbles and ensure full contact with the wall.
3. Create 3D Effect: The wings of the butterflies are designed to be gently folded upwards along the pre-creased line to create a realistic 3D effect. Adjust the angle of the wings to your preference.
4. Repeat: Continue this process for all desired butterfly stickers.

Note: These stickers are designed for single use. While they are removable, reusability is not guaranteed, and repositioning may reduce adhesive effectiveness.

Maintenance and Care

To maintain the appearance of your DAVIKERY 3D Butterfly Wall Stickers:

• Cleaning: If necessary, gently wipe the surface of the butterflies with a soft, dry cloth to remove dust. Avoid using harsh chemicals or abrasive cleaners, as these can damage the material or adhesive.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause colors to fade over time.
• Removal: To remove the stickers, gently peel them off the wall. If any adhesive residue remains, it can typically be removed with a mild adhesive remover or warm soapy water, depending on the wall surface. Test in an inconspicuous area first.

Troubleshooting

• Stickers Not Sticking:
  • Ensure the surface is completely clean, dry, and smooth. Dust, grease, or textured surfaces can prevent proper adhesion.
  • Verify that freshly painted walls have fully cured (2-3 weeks).
  • Avoid touching the adhesive side during application.
• Stickers Peeling at Edges:
  • Press firmly on the edges during application to ensure full contact.
  • High humidity or extreme temperature changes can sometimes affect adhesion.

Specifications

Warranty and Support

DAVIKERY products are manufactured to high-quality standards. For specific warranty information or support inquiries, please refer to the product packaging or contact your retailer. Please note that this manual does not provide specific warranty details.