1. Important Safety Instructions
Please read this manual carefully before using the Arlux PROJECTEUR Série W 10W portable LED work light. Keep these instructions for future reference.
- Do not expose the device to rain or moisture.
- Do not disassemble the unit. Refer all servicing to qualified personnel.
- Keep away from flammable materials.
- Ensure the charging cable is not damaged before use.
- Dispose of the battery and product according to local regulations.
- Avoid direct eye exposure to the LED light.
2. Product Overview
2.1 Components
The Arlux PROJECTEUR Série W 10W is a compact, portable LED work light designed for various applications. It features a robust housing and an adjustable stand.
Figure 1: Front view of the Arlux PROJECTEUR Série W 10W LED Work Light, showing the central LED panel and orange protective corners.
Figure 2: The Arlux PROJECTEUR Série W 10W LED Work Light positioned on a surface, demonstrating its compact size and stable stand.
2.2 Key Features
- Power: 10W LED
- Luminous Flux: 1100 lumens
- Color Temperature: 4000K
- Battery: 4400mAh Lithium-ion
- Runtime: Approximately 6 hours
- Protection Rating: IP65 (dust tight and protected against water jets)
- Lifespan: 30,000 hours
- Material: Aluminum
3. Setup
3.1 Initial Charging
Before first use, fully charge the work light's battery. Connect the provided charging cable to the charging port on the unit and to a suitable power source. The charging indicator will show the charging status. A full charge typically takes several hours.
3.2 Adjusting the Stand
The integrated stand allows for flexible positioning of the work light. Gently pull the stand outwards to adjust the angle of the light. Ensure the stand is stable on a flat surface before use.
4. Operating Instructions
4.1 Powering On/Off
Locate the power button on the unit. Press the power button once to turn the work light on. Press it again to turn the work light off.
4.2 Light Modes
This model features a single illumination mode, providing 1100 lumens of 4000K light when powered on.
5. Maintenance
5.1 Cleaning
To clean the work light, wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components. Ensure the charging port cover is securely closed before cleaning.
5.2 Battery Care
To maximize battery life:
- Charge the battery fully before long periods of storage.
- Recharge the battery at least once every three months if not in regular use.
- Avoid completely draining the battery frequently.
6. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Light does not turn on. | Ensure the battery is charged. Connect to a power source and try again. Check if the power button is functioning correctly. |
| Light is dim. | The battery may be low. Recharge the unit. |
| Short battery life. | Ensure the battery is fully charged before use. Battery performance can decrease over time with repeated charging cycles. Operate in moderate temperatures. |
7. Specifications
| Feature | Value |
|---|---|
| Brand | Arlux |
| Model | PROJECTEUR Série W 10W |
| Power | 10 Watts |
| Luminous Flux | 1100 lumens |
| Color Temperature | 4000 K |
| Battery Type | Lithium-ion (4400mAh) |
| Estimated Runtime | 6 hours |
| Ingress Protection (IP) Rating | IP65 |
| Lifespan | 30,000 hours |
| Material | Aluminum |
| Weight | 700 g |
8. Warranty and Support
8.1 Warranty Information
This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation or contact the retailer for specific warranty terms and conditions.
8.2 Customer Support
For technical assistance, troubleshooting, or inquiries regarding your Arlux PROJECTEUR Série W 10W, please contact your retailer or the manufacturer's customer service department. Contact information can typically be found on the product packaging or the brand's official website.
