1. Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Status Core ANC Active Noise Cancelling Headphones. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Image 1.1: Status Core ANC Headphones (Cloud color). These over-ear headphones are designed for comfort and immersive audio.
2. What's in the Box
Verify that all components are present:
- Status Core ANC Headphones
- USB-C Charging Cable
- 3.5mm Audio Cable (Detachable)
- Documentation (User Manual, Warranty Card)
3. Setup
3.1 Charging the Headphones
Before first use, fully charge your headphones. Connect the supplied USB-C charging cable to the USB-C port on the headphones and the other end to a compatible USB power source (e.g., computer USB port, wall adapter). The LED indicator will show charging status.
- Charging Time: Approximately 2-3 hours for a full charge.
- Battery Life: Up to 30 hours of continuous playback with ANC off, and 20 hours with ANC on.
Image 3.1: Visual representation of battery life: 30 hours without ANC, 20 hours with ANC enabled.
3.2 Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the Power button until the LED indicator flashes blue and red, indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for new devices.
- Select "Status Core ANC" from the list of available devices.
- Once connected, the LED indicator will turn solid blue.
Image 3.2: The headphones feature Bluetooth 5.0 for seamless wireless connection and 40mm dynamic drivers for immersive sound.
3.3 Wired Connection
For a wired connection, plug the 3.5mm audio cable into the headphone's audio jack and the other end into your audio source. The headphones will automatically switch to wired mode, and Bluetooth will be disabled.
4. Operating the Headphones
4.1 Controls Overview
The Status Core ANC headphones feature physical buttons for easy control of music playback, calls, and voice assistant activation.
Image 4.1: Location of physical buttons for volume, track control, play/pause, and voice assist activation.
| Button/Action | Function |
|---|---|
| Power Button (Press & Hold) | Power On/Off, Enter Pairing Mode |
| Volume Up (+) | Increase Volume |
| Volume Down (-) | Decrease Volume |
| Multi-function Button (Center) | Play/Pause, Answer/End Call |
| Multi-function Button (Double Press) | Next Track |
| Multi-function Button (Triple Press) | Previous Track |
| Voice Assist Button | Activate Voice Assistant (Siri, Google Assistant, etc.) |
| ANC Button | Toggle Active Noise Cancellation On/Off |
4.2 Active Noise Cancellation (ANC)
The Status Core ANC headphones feature hybrid active noise cancellation, reducing ambient noise by up to 30 decibels. To activate or deactivate ANC, press the dedicated ANC button. When ANC is active, you will notice a significant reduction in surrounding sounds.
Image 4.2: The headphones provide hybrid active noise cancellation for an immersive listening experience.
4.3 Making and Receiving Calls
The built-in microphones allow for hands-free calling. Use the Multi-function button to manage calls:
- Answer Call: Press the Multi-function button once.
- End Call: Press the Multi-function button once during a call.
- Reject Call: Press and hold the Multi-function button for 2 seconds.
5. Maintenance
5.1 Cleaning
Regular cleaning helps maintain the headphones' condition and hygiene:
- Use a soft, dry, lint-free cloth to wipe the surfaces of the headphones.
- For earpads, gently wipe with a slightly damp cloth and mild soap solution if necessary, then dry thoroughly.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
5.2 Storage
When not in use, store your headphones in a cool, dry place, away from direct sunlight and extreme temperatures. Using a protective case (if available) is recommended to prevent damage.
5.3 Battery Care
To prolong battery life:
- Avoid fully discharging the battery frequently.
- Charge the headphones regularly, even if not used for extended periods.
- Do not expose the headphones to temperatures above 45°C (113°F) or below 0°C (32°F).
6. Troubleshooting
If you encounter issues with your Status Core ANC headphones, refer to the following common solutions:
| Problem | Possible Solution |
|---|---|
| Headphones do not power on | Ensure the battery is charged. Connect to a power source and try again. |
| Cannot pair via Bluetooth | Ensure headphones are in pairing mode (flashing blue/red LED). Turn off and on Bluetooth on your device. Forget the device in your Bluetooth settings and try pairing again. Ensure no other devices are connected. |
| No sound or low volume | Check volume levels on both headphones and the connected device. Ensure headphones are properly paired or the 3.5mm cable is securely connected. Try playing different audio sources. |
| ANC not working effectively | Ensure ANC is activated. Check that the earpads form a good seal around your ears. |
| Poor call quality | Ensure the microphone is not obstructed. Move closer to your connected device. Check network signal strength on your phone. |
6.1 Factory Reset
If issues persist, a factory reset may resolve them. Consult the official Status support website or contact customer service for specific factory reset instructions for your model, as this procedure can vary.
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | SAANC-CE-CLOUD |
| Connectivity Technology | Bluetooth 5.0, Wired (3.5mm Jack) |
| Noise Control | Active Noise Cancellation (up to 30dB) |
| Battery Life | 30 Hours (ANC off), 20 Hours (ANC on) |
| Charging Time | Approx. 2-3 Hours |
| Frequency Response | 20 Hz - 20,000 Hz |
| Audio Driver Type | Dynamic Driver (40mm) |
| Item Weight | 220 Grams (7.8 ounces) |
| Control Type | Physical Buttons, Voice Control |
| Material | Composite, Vegan Leather Earpads |
| Included Components | CD (as per product data), USB-C Charging Cable, 3.5mm Audio Cable |
8. Warranty and Support
8.1 Warranty Information
Status products are covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of your warranty may vary by region and purchase date. Please refer to the warranty card included with your product or visit the official Status website for detailed warranty information.
8.2 Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Status customer support through their official website. Have your product model number (SAANC-CE-CLOUD) and proof of purchase ready when contacting support.
For more information, visit the Status Store on Amazon.
