UGREEN NVMe and SATA M.2 Enclosure Instruction Manual

1. Introduction

This manual provides detailed instructions for the UGREEN NVMe and SATA M.2 Enclosure (Model 90264). This versatile enclosure allows you to transform your M.2 NVMe or SATA SSD into a portable external storage device, offering high-speed data transfer and robust protection for your valuable data.

Figure 1: UGREEN NVMe and SATA M.2 Enclosure with USB-C to USB-C and USB-A to USB-C cables.

2. Key Features

• Ultra-fast Data Transfer: Equipped with USB 3.2 Gen 2 and PCIe 3.0, supporting data transmission rates up to 10Gbps. Transfer 1GB of files in approximately 1 second.


Figure 2: High-speed data transfer capabilities of the enclosure.

• UASP & TRIM Support: Enhances read and write speeds by up to 70% and 40% respectively, compared to conventional USB 3.1 interfaces, ensuring optimal performance and SSD longevity.
• Dual Protocol Compatibility: Supports both NVMe (M Key, B&M Key) and SATA (B&M Key) M.2 SSDs. Note: Does not support M-Key SATA or B-Key NGFF/SATA PCIe SSDs.

Figure 3: Compatibility with various M.2 SSD key types.
• Tool-Free Installation: Features a convenient push-to-open design with rubber fasteners for quick and easy SSD installation without the need for tools or drivers.
• Optimal Heat Dissipation: Constructed with an aluminum shell and includes a thermal pad for efficient heat dissipation, preventing performance throttling and ensuring stable operation.


Figure 4: Aluminum casing and thermal pad for effective heat management.

• Shock and Vibration Resistant: Comes with an extra silicone case for full-round protection against accidental drops and impacts.
• Wide System Compatibility: Supports Windows, Mac OS, Chrome OS, Linux, and Android operating systems. Compatible with various devices including MacBooks, iPad Pros, Dell XPS series, Samsung devices, Mac mini, PS5, and Xbox.

Figure 5: Broad compatibility across different platforms and devices.

3. Package Contents

The UGREEN NVMe and SATA M.2 Enclosure package includes:

• 1 x UGREEN NVMe and SATA M.2 Enclosure
• 1 x USB-C to USB-C Cable (50cm)
• 1 x USB-A to USB-C Cable (50cm)
• 1 x Silicone Protective Case
• Rubber Fasteners (pre-installed or included separately for SSD mounting)
• User Manual (this document)

Figure 6: All components included in the UGREEN M.2 Enclosure package.

4. Compatibility

4.1. SSD Compatibility

This enclosure is designed to be compatible with both NVMe and SATA M.2 SSDs. It supports M Key and B&M Key SSDs for NVMe, and B&M Key SSDs for SATA. It accommodates various M.2 SSD sizes including 2280, 2260, 2242, and 2230.

Important Note:

• Does NOT support M-Key SATA SSDs.
• Does NOT support B-Key NGFF/SATA PCIe SSDs.

Figure 7: Supported M.2 SSD form factors and key configurations.

4.2. System and Device Compatibility

The enclosure is plug-and-play and driver-free for most modern operating systems and devices:

• Operating Systems: Windows, macOS, Chrome OS, Linux, Android.
• Devices: Laptops (e.g., MacBook Air/Pro, Dell XPS Series), Tablets (e.g., iPad Pro, Samsung tablets), Desktops (e.g., Mac mini), Gaming Consoles (e.g., PS5, Xbox).

5. Setup Guide

Follow these steps to install your M.2 SSD into the UGREEN enclosure:

1. Open the Enclosure: Press the button on one end of the enclosure to release the internal tray. Slide the tray out completely.
2. Insert the SSD: Gently insert your M.2 SSD into the M.2 slot on the PCB at a 45-degree angle.
3. Secure the SSD: Use the included rubber fastener to secure the SSD in place. Slide the rubber stopper over the notch on the SSD to hold it down firmly.
4. Close the Enclosure: Slide the internal tray back into the aluminum shell until it clicks securely into place.
5. Apply Silicone Case (Optional): For added protection, slide the silicone protective case over the enclosure.

Figure 8: Visual instructions for tool-free SSD installation.

Video Guide: Spend Less Time on Installation

6. Operating Instructions

6.1. Connecting to Your Device

Once your SSD is securely installed in the enclosure, connect it to your computer or compatible device using one of the provided USB cables:

• For USB-C ports on your device, use the USB-C to USB-C cable.
• For USB-A ports on your device, use the USB-A to USB-C cable.

The enclosure is plug-and-play, so no additional drivers are typically required. Your operating system should automatically detect the new storage device.

6.2. LED Indicator

The white LED indicator on the enclosure provides visual feedback on its operational status:

• Solid White: The enclosure is powered on and connected.
• Flashing White: Data transmission is in progress.

Figure 9: The LED indicator shows the device's status.

Video Guide: UGREEN NVMe and SATA M.2 Enclosure Overview

7. Maintenance and Care

• Proper Handling: Always handle the enclosure with care. Avoid dropping it or subjecting it to strong impacts. The included silicone case provides additional shock and vibration resistance.
• Heat Management: While the aluminum shell and thermal pad are designed for efficient heat dissipation, prolonged heavy use may still cause the enclosure to warm up. Ensure adequate airflow around the device during operation.
• Cleaning: Use a soft, dry cloth to clean the exterior of the enclosure. Avoid using liquid cleaners or abrasive materials.
• Safe Removal: Always safely eject the enclosure from your computer before disconnecting the USB cable to prevent data corruption.
• Storage: When not in use, store the enclosure in a cool, dry place away from direct sunlight and extreme temperatures.

8. Troubleshooting

If you encounter issues with your UGREEN NVMe and SATA M.2 Enclosure, refer to the following common problems and solutions:

Video Guide: UGREEN M.2 NVMe and SATA SSD Enclosure

9. Specifications

10. Warranty and Support

UGREEN products typically come with a limited warranty. For specific warranty terms, technical support, or customer service inquiries, please refer to the warranty card included in your package or visit the official UGREEN website:

www.ugreen.com

You may also contact UGREEN customer support through the platform where you purchased the product.