ULANZI Super Clamp Camera Mount R094 Instruction Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your ULANZI Super Clamp Camera Mount R094. Please read this manual thoroughly before operation and retain it for future reference.

Figure 1: ULANZI Super Clamp Camera Mount R094 with included GoPro adapter.

Product Overview

The ULANZI Super Clamp Camera Mount R094 is a versatile accessory designed for securely attaching cameras, monitors, LED lights, and other equipment to various surfaces. It features a robust aluminum alloy construction and a 360° adjustable ball head for flexible positioning.

Figure 2: ULANZI Super Clamp R094 in use with a DSLR camera.

Key Features:

• 360° Ball Head: Allows for flexible angle adjustments.
• Wide Clamp Opening: Maximum open distance of 60mm (2.36 inches), suitable for rods, plates, and various surfaces.
• Universal Mounting Threads: Equipped with 1/4"-20 and 3/8"-16 female threads for broad compatibility.
• Durable Construction: Made from sturdy aluminum alloy with non-slip rubber pads.
• Payload Capacity: Supports equipment up to 1.5 kg (3.3 lb).

Figure 3: Detailed components of the ULANZI Super Clamp R094.

Setup Instructions

1. Attaching the Clamp to a Surface:

1. Identify a stable surface for mounting, such as a rod, table edge, or handlebar. Ensure the surface is within the clamp's jaw opening range (13mm to 60mm).
2. Loosen the T-shape bar knob on the super clamp by turning it counter-clockwise to open the jaws.
3. Position the clamp jaws around the desired surface.
4. Tighten the T-shape bar knob clockwise until the clamp is securely fastened. Ensure the non-slip rubber pads are making full contact with the surface to prevent movement and scratches.

Figure 4: Clamp jaw opening range.

2. Mounting Equipment to the Ball Head:

1. The ball head features a 1/4"-20 screw for attaching most cameras, monitors, and accessories.
2. For GoPro cameras, attach the included Action Camera adapter to the 1/4"-20 screw on the ball head, then mount your GoPro to the adapter.
3. Ensure the equipment is securely tightened onto the 1/4"-20 screw.

Figure 5: 1/4"-20 screw for equipment attachment.

Figure 6: GoPro camera mounted using the adapter.

Operating Instructions

Adjusting the Ball Head:

1. To adjust the angle of your mounted equipment, loosen the 360° adjustable wingnut on the ball head by turning it counter-clockwise.
2. Position your equipment to the desired angle. The ball head allows for full 360° rotation and tilt.
3. Once the desired position is achieved, tighten the wingnut clockwise to lock the ball head securely in place.

Figure 7: Ball head adjustment mechanism.

Using the 3/8"-16 Thread:

The main clamp body also features a 3/8"-16 female thread, allowing for direct attachment of accessories that utilize this standard, or for mounting the clamp itself onto a 3/8" stud.

Figure 8: 3/8"-16 screw hole on the clamp body.

Maintenance

• Cleaning: Wipe the clamp with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the clamp in a dry, cool place away from direct sunlight and extreme temperatures.
• Inspection: Periodically check all screws and moving parts for tightness. Ensure the rubber pads are intact and provide adequate grip.

Troubleshooting

Specifications

Warranty and Support

ULANZI products are designed for reliability and performance. For warranty information or technical support, please refer to the official ULANZI website or contact their customer service directly. Please retain your proof of purchase for warranty claims.

If an Action Camera adapter is missing from your package, please contact ULANZI customer support for assistance.