Salomon S/PRO Series Men's Ski Boots 130 GW Instruction Manual

1. Product Overview

The Salomon S/PRO Series Men's Ski Boots 130 GW are engineered for expert skiers seeking a precise fit and high-level performance. Featuring an easy-to-slip-on shell construction and a customizable My CustomFit 4D liner, these boots are designed to provide an outstanding fit and efficient power transmission.

Key Features:

• Flex Rating: 130 for advanced performance.
• Last: 100/106 mm, offering a balance of comfort and precision.
• Custom Shell HD: Shell and cuff can be customized for a personalized fit.
• My CustomFit 4D Race Liner: Pre-shaped, seamless, and anatomically designed for exceptional foothold and precise steering.
• 45mm Strap: Provides secure foot hold and optimal power transfer.
• GripWalk Soles: Enhanced grip and walking comfort.

Image 1.1: Front-side view of the Salomon S/PRO 130 GW Ski Boot, highlighting its overall design and buckle system.

2. Setup and Initial Adjustment

2.1. Putting on the Boots

1. Ensure all buckles are unfastened and the power strap is loosened.
2. Pull the tongue of the liner forward and outward to create space for your foot.
3. Slide your foot into the boot, ensuring your heel is seated firmly against the back of the liner.
4. Tap your heel on the ground a few times to fully seat your foot.

2.2. Buckle and Strap Adjustment

1. Start by fastening the two buckles over the instep (middle buckles) to secure your foot. Adjust them until snug, but not overly tight.
2. Next, fasten the two cuff buckles (upper buckles) around your shin. These should be firm to provide support and power transmission.
3. Finally, tighten the 45mm power strap at the top of the cuff. This strap enhances shin contact and improves responsiveness.
4. Stand up and flex forward in the boots. Re-adjust buckles if necessary to achieve a comfortable yet secure fit.

Image 2.1: Front view of the ski boot, showing the buckle system and power strap for adjustment.

2.3. Custom Shell HD and My CustomFit 4D Liner

The Custom Shell HD technology allows for personalized molding of the boot shell, while the My CustomFit 4D liner offers a pre-shaped, seamless, and heat-moldable fit. For optimal customization, it is recommended to have these procedures performed by a certified Salomon bootfitter. This process typically takes about 10 minutes for the shell and ensures the best possible fit and performance.

Image 2.2: The My CustomFit 4D Race Liner, designed for anatomical fit and customization.

3. Usage Guidelines

These boots are designed for downhill skiing. Proper technique and understanding of your equipment are crucial for safety and performance.

3.1. Skiing Stance and Flex

• Maintain an athletic stance with knees and ankles slightly bent.
• The 130 flex rating indicates a stiff boot, providing excellent power transmission and responsiveness for aggressive skiing. Ensure you can comfortably flex forward in the boots to engage your skis.
• The uniform density shell and cuff construction are designed to transmit power efficiently from your body to your skis.

3.2. GripWalk Soles

The integrated GripWalk soles provide improved traction and comfort when walking in your ski boots. Ensure your ski bindings are compatible with GripWalk soles for safe and proper release functionality. Consult your ski technician if unsure.

Image 3.1: Bottom view of the ski boot, illustrating the GripWalk soles for enhanced traction.

4. Care and Maintenance

Proper care extends the life and performance of your ski boots.

4.1. After Each Use

• Unbuckle all buckles and loosen the power strap.
• Remove the liners from the shells if they are damp, and allow both shells and liners to air dry completely at room temperature. Avoid direct heat sources.
• Wipe down the exterior of the boots with a damp cloth to remove dirt, snow, or salt.

4.2. Storage

• Once completely dry, reinsert the liners into the shells.
• Lightly buckle all buckles (first or second click) and fasten the power strap. This helps the boots maintain their shape during storage.
• Store boots in a cool, dry place away from direct sunlight or extreme temperatures.

4.3. Inspection

• Regularly inspect buckles, straps, and soles for wear or damage.
• Check the integrity of the shell and liner. If any significant damage is observed, consult a professional ski shop.

5. Troubleshooting Common Issues

5.1. Discomfort or Pressure Points

• Issue: Pain or pressure in specific areas of the foot or shin.
• Solution: Re-adjust buckles and power strap. Ensure your socks are thin and wrinkle-free. If discomfort persists, consider having the Custom Shell HD or My CustomFit 4D liner re-molded by a professional bootfitter.

5.2. Loose Fit or Heel Lift

• Issue: Foot feels loose inside the boot, especially heel lifting during flexion.
• Solution: Tighten instep buckles first, then cuff buckles, and finally the power strap. Ensure your heel is fully seated. If the issue continues, professional bootfitting may be required to add padding or adjust the liner.

5.3. Difficulty Getting Boots On/Off

• Issue: Boots are hard to put on or take off.
• Solution: Ensure all buckles are completely unfastened and the power strap is fully loosened. Pull the tongue forward. If boots are cold, warming them slightly (not with direct heat) can make the plastic more pliable. The soft PU inserts in the outer overlap are designed to facilitate entry.

Image 5.1: Side view of the ski boot, highlighting the Custom Shell HD and Seamless Liner features that contribute to fit and comfort.

6. Technical Specifications

7. Warranty and Support

Salomon products are manufactured to high-quality standards. For specific warranty information regarding your S/PRO Series Ski Boots, please refer to the warranty card included with your purchase or visit the official Salomon website. For technical support, service, or professional bootfitting, please contact an authorized Salomon dealer or customer service representative.

You can find more information and contact details on the official Salomon website: www.salomon.com