Troy Lighting F8205-SBK Madrid 5-Light Chandelier User Manual
Model: F8205-SBK
1. Important Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or even fatal. Keep these instructions for future reference.
- WARNING: This product can expose you to Di(2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
- Always disconnect power at the main circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- Consult a qualified electrician if you have any electrical questions.
- Handle glass components with care to prevent breakage.
2. Package Contents
Verify that all components are present before beginning installation. If any part is missing or damaged, do not attempt to assemble or install the fixture.
- Chandelier Frame Assembly
- Glass Shades (5 pieces)
- Mounting Hardware Kit (crossbar, mounting screws, wire nuts, canopy)
- Instruction Manual
3. Tools Required for Installation
- Phillips Head Screwdriver
- Flathead Screwdriver
- Wire Strippers
- Electrical Tape
- Ladder
- Safety Glasses
4. Setup and Installation Instructions
It is recommended that installation be performed by a qualified electrician.
- Turn Off Power: Before starting, ensure the power to the junction box is turned off at the circuit breaker.
- Prepare Mounting: Attach the mounting crossbar to the junction box using the provided mounting screws. Ensure it is securely fastened.
- Wire Connections: Carefully connect the fixture's wires to the corresponding house wires. Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box. Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box. Connect the bare copper or green ground wire from the fixture to the green or bare copper ground wire from the junction box. Secure all connections with wire nuts and wrap with electrical tape for added safety.
- Mount Fixture: Carefully push the wired fixture up to the ceiling, aligning the mounting holes on the canopy with the screws on the crossbar. Secure the fixture in place with the decorative nuts or screws provided.
- Install Bulbs: Insert five G9 base halogen bulbs (max 35 watts each, not included) into the sockets. Do not exceed the maximum wattage.
- Attach Glass Shades: Carefully thread each clear glass shade onto its respective fixture arm. Ensure they are securely tightened but do not overtighten.
- Restore Power: Once installation is complete, restore power at the main circuit breaker.
Image: Chandelier frame assembly detail.
5. Operating Instructions
The Troy Lighting Madrid Chandelier is designed for simple operation. Once properly installed and powered, the fixture can be controlled via a standard wall switch. If connected to a compatible dimmer switch, the light output can be adjusted. The product specifications mention a 'Touch' control method; if your installation includes a compatible touch-sensitive wall switch or system, refer to its specific instructions for operation.
Image: Fully assembled Troy Lighting Madrid Chandelier.
6. Maintenance
- Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass.
- Bulb Replacement: Ensure power is off and bulbs have cooled before attempting to replace them. Unscrew the old G9 bulb and replace with a new G9 halogen bulb (max 35 watts).
- Inspection: Periodically check all connections and mounting hardware for tightness.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | 1. Power is off 2. Loose wire connection 3. Faulty bulb | 1. Check circuit breaker 2. Verify all wire connections are secure (power off first) 3. Replace bulb |
| Light flickers | 1. Loose bulb 2. Incompatible dimmer switch 3. Loose wire connection | 1. Tighten bulb 2. Ensure dimmer is compatible with halogen bulbs 3. Check wire connections (power off first) |
| Glass shade is loose | Shade not tightened properly | Gently tighten the glass shade until secure |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Troy Lighting |
| Model Number | F8205-SBK |
| Dimensions (L x W x H) | 54" x 54" x 14.5" |
| Finish | Soft Black |
| Shade Material | Clear Glass |
| Number of Lights | 5 |
| Light Source Type | Halogen (Xenon also listed, but Halogen is more common for G9) |
| Bulb Base | G9 |
| Wattage (per bulb) | 35 watts (max) |
| Voltage | 120 Volts |
| Installation Type | Semi Flush Mount / Protruding |
| Material | Alloy Steel, Glass, Iron |
| Item Weight | 13 Pounds |
| Special Feature | Adjustable |
| Control Method | Touch (if compatible system is installed) |
| UL Listed | Yes |
9. Warranty and Support
This Troy Lighting fixture comes with a 1-year limited manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or normal wear and tear.
For technical support, warranty claims, or replacement parts, please contact Troy Lighting customer service. Refer to your purchase documentation for specific contact information or visit the official Troy Lighting website.
