Introduction
Thank you for purchasing the Muse MT-110DAB Turntable with Integrated Stereo System. This versatile audio device combines vintage vinyl playback with modern digital features, including Bluetooth connectivity, CD player, DAB/DAB+ and FM radio, and USB playback/encoding. This manual provides essential information for the safe and efficient operation of your new system. Please read it thoroughly before use and retain it for future reference.
Safety Instructions
To ensure safe operation and prevent damage, please observe the following precautions:
- Do not expose the unit to rain or moisture.
- Do not block any ventilation openings.
- Ensure the power cord is not pinched or walked on.
- Unplug the unit during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel.
Product Overview
Familiarize yourself with the components of your Muse MT-110DAB system.
Figure 1: Front view of the Muse MT-110DAB Turntable with the dust cover open, revealing a vinyl record on the platter and the tonearm. The front panel features the display, control buttons, and volume knobs.
Figure 2: The Muse MT-110DAB Turntable with its dust cover closed, showcasing its compact and retro design. The front panel with the display and controls is clearly visible.
Figure 3: The Muse MT-110DAB Turntable positioned on a wooden surface, highlighting its elegant integration into a home environment. The dust cover is open, and a vinyl record is on the platter.
Setup
1. Unpacking
Carefully remove the unit from its packaging. Ensure all components are present: the main unit, AC adapter, and an additional stylus. Retain the packaging for future transport or storage.
2. Power Connection
Connect the supplied AC adapter to the DC input jack on the back of the unit, then plug the adapter into a standard AC outlet (100-240V, 50/60Hz).
3. Antenna (for Radio)
Extend the telescopic antenna fully for optimal DAB/DAB+ and FM radio reception. Adjust its position for the best signal quality.
Operating Instructions
1. Turntable Operation
- Speed Selection: Select the desired playback speed (33, 45, or 78 RPM) using the speed selector switch. For 45 RPM records, place the included 45 RPM adapter on the spindle.
- Playing a Record: Place a record on the platter. Lift the tonearm using the cueing lever and position the stylus over the desired track. Lower the tonearm gently.
- Auto-Stop: The turntable features an auto-stop function. When enabled, the platter will stop rotating automatically at the end of a record. Use the ON/OFF switch for auto-stop.
2. Bluetooth Connectivity
To stream music wirelessly from your smartphone, tablet, or laptop:
- Switch the unit to Bluetooth mode. The display will indicate Bluetooth pairing mode.
- Enable Bluetooth on your external device and search for "MT-110DAB" (or similar).
- Select the unit to pair. Once connected, you can play audio from your device through the turntable's speakers.
3. CD Player
The integrated CD compartment supports CD, CD-R/RW, and MP3 formats.
- Press the CD mode button.
- Open the CD tray, insert a disc with the label side up, and close the tray.
- Playback will begin automatically or can be controlled using the playback buttons.
4. DAB/FM Radio
Enjoy digital and analog radio broadcasts. The unit supports 60 preset stations (30 FM + 30 DAB).
- Switch to DAB or FM mode.
- Perform an auto-scan to find available stations.
- Save your favorite stations to the preset memory for quick access.
5. USB Playback and Encoding
Insert a USB drive into the USB port for MP3 playback or to encode audio from vinyl/CDs to MP3 format.
- Playback: Select USB mode and navigate through your audio files using the controls.
- Encoding: Follow the instructions on the display to record audio from the turntable or CD player directly to a connected USB drive.
6. External Connections
- Aux-in: Connect external audio devices (e.g., non-Bluetooth phones, MP3 players) to the 3.5mm Aux-in female jack.
- RCA Output: Use the RCA output jacks to connect the system to an external amplifier or powered speakers for enhanced audio.
Maintenance
1. Cleaning
Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the dust cover closed when not in use to protect the turntable components.
2. Stylus Replacement
The stylus (needle) is a consumable part and will wear out over time. Replace the stylus when you notice a decrease in sound quality or skipping. An additional stylus is included with your purchase. Refer to the specific instructions for stylus replacement in the full manual (if available) or consult a qualified technician.
Troubleshooting
If you experience issues with your MT-110DAB, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Power cord not connected; outlet not active. | Ensure AC adapter is securely plugged into the unit and a working power outlet. |
| No Sound | Volume too low; incorrect input mode; external speakers not connected (if using RCA out). | Increase volume; select correct input mode (Phono, CD, Bluetooth, DAB/FM, USB, Aux); check external speaker connections. |
| Turntable Skipping | Record is dirty or scratched; stylus is worn or dirty; unit is not level; excessive vibration. | Clean record; clean or replace stylus; place unit on a stable, level surface; avoid placing near vibrating sources. |
| Poor Radio Reception | Antenna not extended or positioned correctly; weak signal. | Fully extend and adjust the telescopic antenna. Try repositioning the unit. |
Specifications
| Brand | MUSE |
| Model Number | MT-110 DAB |
| Dimensions (H x W x L) | 171 mm x 343 mm x 324 mm |
| Net Weight | 3.83 kg |
| Power Supply | AC: 100-240 V, 50/60 Hz |
| Connectivity | Bluetooth, USB, RCA Output, 3.5mm Aux-in |
| Turntable Speeds | 33 / 45 / 78 RPM |
| Display | 2.4" TFT Screen |
| CD Compatibility | CD, CD-R/RW, MP3 |
| Radio | DAB/DAB+, FM (60 presets: 30 FM + 30 DAB) |
| Special Features | USB Playback & Encoding, Auto-Stop Turntable, Wooden Cabinet |
| Included Accessories | AC Adapter, Additional Stylus, 45 RPM Adapter |
Warranty and Support
Information regarding product warranty, spare parts availability, and software updates is not provided in the available product data. For specific warranty terms or technical support, please refer to the official Muse website or contact their customer service directly.
- Spare Parts Availability: Information unavailable.
- Software Updates: Information unavailable.
